Register and take advantage of the discounts and advantages of being a Professional of Nautical
Join the more than 500 Nautical Professionals now
We are sorry, but this product is discontinued and will not be available for purchase again.
Awesome pack that includes; Inflatable boat CBO 270 AIR, Kybin 55 Lbs freshwater electric motor, Xtreme Exellent 12 V - 100 Ah battery Victron Energy battery charger IP65 12V and Attwood polyethilene battery box
● Inflatable boat with air mat floor for 3+1 people
● Material: PVC 1100 Decitex
● Ca/Ca technology
● 100 % maintenance free and leakproof
● Type (V - Ah - A (EN)): 12 V - 100 Ah - 760 A
● Dimensions (L x W x H): 353 x 175 x 175 cm
● Weight: 21.4 Kg
Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Low Power Battery Charger IP 65 | |
Input voltage range | 200-265V |
Frequency | 50/60Hz |
Charge voltage 'absorption' (V DC) | 14,4 or 14,7 |
Charge voltage 'float' (V DC) | 13,6 |
Charge voltage 'storage' (V DC) | 13,2 |
Charge current (A) | 4A or 0,8A |
Can be used as power supply | No [output relay] |
Protection | Reverse polarity, Temperature |
Operating temp. range | -20 to +40°C (full rated output up to 25°C) |
Humidity (non condensing) | Max 95 % |
Eclosure | |
Material & Colour | PC Black |
Battery-connection | Black and red cable of 1,5 meter with battery clamps |
230 V AC-connection | Cable of 1,5 meter with CEE 7/7 plug |
Protection category | IP 65 |
Weight (kg) | 0,56 |
Dimensions (h x w x d in mm) | 42 x 61 x 185 |
Standards | |
Safety | EN 60335-1, EN 60335-2-29 |
Emission | EN 55014-1, EN 61000-6-3, EN 61000-3-2 |
Immunity | EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
Battery enclosure high strength polyethylene
Ref.: | Inside dimensions | Outside dimensions |
9067-1 | 350 x 184 x 267 mm | 428 x 245 x 276 mm |