Accessories

  ♦ To join anchor and chain by facilitating the passage of the anchor for the tip. With its use avoids the traditional bond between anchor shackle and chain, a source of many problems and snags when passing by the tip of the bow.   ♦ Model swivel prevents twisting of the chain during anchoring. Chain of 6-8 mm,   ♦ 95 mm length. read+

INOXIDABLE GIRATORIA PARA CADENA DE 10-12 mm. Ø read+

De acero inoxidable AISI 316. Alta resistencia avalada por la marca Kong. Consutar medidas y resistencia en la fotor al pie de página y el cuadro adjunto.     Cadena Ø mm. A. mm. B. mm. C. mm. D.  Ø mm.  E. mm.  F. mm.  Carga rotura recta. Kg. Carga rotura doblada. Kg.                    6-8 93 28 ... read+

● Swivel connector chain-anchor in stainless steel 316 which positions the anchor correctly in the bow roller ● For 6-8 mm chain ● Length: 21 cm read+

● Swivel connector chain-anchor in stainless steel 316 which positions the anchor correctly in the bow roller ● For 10-12 mm chain ● Length: 32 cm read+

Made of reinforced polymer with fiberglass, adaptable to any type of anchor up to 8 kg, fits any boat up to a maximum length of 8 metres. Can fit into the lines and chains; always recovers the anchor and the line. Adjustable release load from 20 to 200 kg, long lasting in sea conditions; comes in packs. read+

- Stainless steel hook that allows the freeing of an anchor that is entangled in the chains of others, in the catenary of buoys, moorings, etc. without the need to dive into the water, without effort, without getting dirty and especially without risks. - Made of stainless steel, the Kong Anchor Saver is an accessory that is essential on every boat. read+

● AnchorSnubber safely absorbs shock loads and helps keep your anchor set. ● AnchorSnubber helps your boat ride comfortably at anchor, even in rough anchorages, adverse currents, or strong winds. No more chain noise keeping you awake! It attaches directly to chain, rope anchor rode, or anchor snubber line. Includes ● AnchorSnubber with two 316 stainless captive key pin shackles. Fits ... read+

● Anchor Roll can be extended with a solar LED lamp for a better visibility by night LED - Specifications: + approx Ø 10 cm + waterproof (IP 65) + extra bright LED with Light Sensor + lightening time up to 12 hours (when fully charged) AnchorRoll LED Light is also usefull as additional anchorlight + Solar Panel 2V 50mA / Battery: AAA NI-MH, 300 mAh read+

● Raise the anchor to the surface as the Anchorlift, but is designed specifically for anchor chains of 30 m or more .. ● Buoy not included read+

● Manufactured from polished AISI 316 stainless steel ● Polished AISI 316 stainless steel anchor connector with self-aligning function that ensures the correct positioning of the anchor in the bow roller and includes safety screws. ● Equipped with dual shielding to prevent the shank from levering while under load. Fitted with an anti-oscillation connector in the roller/bow area.  ●&nb... read+

● Raise the anchor to the surface with the help of the engine. Rig protected against corrosion and super tough nylon. It can be used with a buoy or defense. ● charging capacity up to 36 kg anchor with anchor line from 9 to 16 mm. ● Recommended engine boats up to 25 feet. ● Buoy not included read+

● It consists of eyebolt and Pad-Eye + high-resistance strap + snap-hook.To be installed near the winch as safety gripper to prevent the anchor from falling during navigation. Referencia  For chain Ø mm Length cm Peso Kg Dimension(Al x An x Lon) Anchorage point Snap hook 01.747.06 6/7 20 0.18  3 x 15 x 25 39.181.05 09.247.70 01.474.10 10/12 25 0.28  3 x 15 x 30 39.873... read+

● Fixed anchor connector made of high quality stainless steel AISI 316 or carbon steel ● Anchor slides perfectly through the ferrule without any problems or damage to the sheaving ● Anchor straughtens up automatically and is correctly positioned on board     Sheave  Ø mm. A. mm. B. mm. C. mm. D.  Ø mm.  E. mm.  F. mm.  Straight break load Kg.. Kg. Load bent break Kg.  6-8 80 28 16 10 19 9 2.500... read+

Easy to pull anchor over the bow roller Captured pins will not loosen when under load Pins can be removed by using a hex key 4mm Screw glue on screws is required by installation -Breaking Load: 3.290 kg -Working Load: 850 kg -iB1: 9mm -Ø1: 7.5mm -D: 28mm -L: 84mm -Ø: 10mm -iB: 22mm -Material: Stainless steel A4 - AISI 316 read+