Accesories

Larga vida útil para acumuladores de plomo (baterías húmedas, de gel y de malla de fibra de vidrio absorbente (AGM).   WAECO PerfectBattery BR12   Reactivador de batería 12 V Prolonga la vida útil de baterías   Tensión de batería: 12 V CC Tensión de puesta en circuito: > 12,6 voltios ± 0,2 voltios Corriente en modo de espera: < 0,2 mA Dimensiones (ANxALxFO): 100 x 67 x 25 ... read+

● For WAECO PerfectCharge automatic chargers in series MCA, with 5 m supply cable read+

● For WAECO PerfectCharge IU0U automatic chargers in series MCA read+

● The 2 V cigarette plug with fuse is an accessory of the Blue Power IP65 Charger with DC connector. ● Fuse 16A read+

● The Clamp connector with fuse is an accessory of the Blue Power IP65 Charger with DC connector. ● ATO fuse 30A read+

● The Battery Alarm is a small and low cost alarm panel which monitors your battery bank. It features both audible and visual alarms, as well as a potential free contact with normally open and normally closed contacts. Alarm thresholds and hysteresis are programmable by DIP switches. See manual for more information. ● 65 x 120 x 40 mm read+

● The VE.Direct to USB interface connects products to VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.   read+

● The battery sensor measures the effective current and voltage of the connected battery and then calculates its capacity and its state of charge. It gives you a warning if the battery does not charge or is defective, and notifies you when it should be disconnected from the circuit. A useful accessory for your Dometic PerfectCharge automatic charger.   ● Detects the connection of batteries that... read+

DOMETIC SINEPOWER DSP-RCT / REMOTE CONTROL FOR DSP-T CONVERTERS This remote control, designed for easy operation of all sine wave converters of the Dometic DSP-T series, offers the most important standard functions: on, off and standby. Available as an optional accessory. ● Practical remote control for the most important functions: On, off or standby mode ● Easy operation with the touch of a bu... read+

DOMETIC SINEPOWER DSP-EM / CONTROL AND MONITORING DEVICE FOR DSP-T CONVERTER AND MCA CHARGER A very practical and versatile remote control that facilitates the use of Dometic sine wave converters and battery chargers. In addition to the standard functions (on, off and rest), it also indicates values ​​such as power and voltage. By connecting an MCA battery charger and a battery sensor, the unit... read+

● Remote control panel for battery chargers: BC12151 ● Dimensions: 72 x 557 mm ● Cutting size with a diameter of 44 mm. read+

The Victron GX Touch 50 is the display accessory for the Cerbo GX.  The five-inch touch screen display gives an instant overview of your system and allows to adjust settings in the blink of an eye.  Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clea... read+

EasyView 5 Waterproof System Monitor with 'daylight readable' display and intuitive touchscreen Controlling your Mastervolt system has never been easier. The EasyView 5 features a sharp, waterproof display that is readable in daylight. Thanks to the color touchscreen and multi-language menu, the display is a pleasure to operate. Easily customizable favorite pages show all relevant system inform... read+

The Mastervolt USB Interface makes it possible to read in and configure your Mastervolt products in a MasterBus configuration or a CZone network from your Windows device. For MasterBus the required MasterAdjust software can be downloaded below. MasterAdjust allows you to monitor and configure live system data, giving you full control over your Mastervolt products. For CZone systems the necessar... read+

Remote monitoring for Mass battery chargers, with GMDSS system monitoring functions. Battery voltage and current are displayed on the digital panel. GMDSS stands for Global Maritime Distress and Safety System, an internationally agreed-upon set of safety procedures, types of equipment, and communication protocols that is a requirement for the SOLAS (Safety Of Life At Sea) convention and uses DS... read+

Battery monitor, 12/24 V DC with large, splash proof display (IP65) and power bar. Displays remaining time and stores special battery status events. An affordable battery monitor that does exactly that: providing critical information about the status of your battery bank under all circumstances. Moreover it will warn you when your battery bank is empty. Also displays the remaining time until yo... read+

On/off control for the AC Master sine wave inverter with a clear on/off indicator which indicates when the inverter is active. In addition, the AC Master Remote Control makes it possible to turn the inverter on or off automatically by means of an auxiliary input (12/24 V), for example when switching on the onboard AC power or while starting an engine. The AC Master Remo... read+

read+

Control panel to switch inverter ON/OFF remotely. Display shows status of battery voltage, AC output voltage, power output and alarm functions. Technical specs Dimensions: 175x105x105 mm Weight: 0.26 kg read+

This remote control, designed for easy operation of all sine wave inverters with an output power of 600 W or more, offers the most important standard functions: on, off, and standby mode. This practical accessory is included in the delivery volume.   Technical specifications • Model: DSP-RC • Dimensions product depth, [mm]: 28 • Dimensions product height, [mm]: 55 • Dimensions product widt... read+