By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Nuova Rade connector tank vent
Connector for the fuel tank vent, used to join the vent hose to the tank or to the outlet to the exterior. Available for hoses of 16 and 20 mm diameter.
Nuova Rade Inlet Elbow Fitting for Flexible Tank
Elbow inlet fitting for flexible tank, with 1 1/2 thread and sealing ring, allowing connection of a 38 mm hose for filling the tank on board.
Nuova Rade Outlet Elbow Fitting for Flexible Tank
Elbow outlet fitting for flexible tank, with connection for Ø12 mm hose and 1 1/2 thread with sealing ring. Used to drain the contents of the flexible tank through a 12 mm hose.
● Input terminal (diameter 12 mm), with threaded ring 38 mm
CanSB Water Strainer
● Water filter with rubber hose terminal ● Available with different output diameters:
- Ø 19 - 25 mm
- Ø 32 - 38 mm
CanSB Inspection Porthole
● Inspection porthole complete with all connections required for the functioning of large size plastic tanks, made in nylon reinforced flange – threaded cap with vent – fuel pick-up with ø 12 hose terminal – vent 17-19 – blinde flange ready to take fuel gauge. ● Multifunction plate CANSB BO2150 ● Suitable for fixed fuel tanks CANSB ● In black color with red caps
CanSB Inspection Porthole Only for Water Tanks
● Inspection porthole, only for water tanks, complete with cap w/vent and N. 1 terminal for rubber hose. On the porthole can be mounted filler kit our ART. BO2156 (as showed), a mechanical or electric sender unit for water level, 2nd water pick-up or air vent for fix installation. ● Multifunction plate CANSB BO2155 ● Suitable for fixed fuel tanks CANSB
Water Filter Set, small, 13 mm Barbs
This complete and easy to mount water filter system containst the following parts: ● 5" solid housing made out of reinforced polypropylene with black cap and blue sump. ● Filter Nr. 01.0728.00. ● Polypropylene fittings with 13 mm exit. ● Mounting bracket with screws. Size: 18 x 12 cm
Yachticon Prefilter for Hoses with 13 mm barbs
● This pre-filter with activated carbon can be easily inserted into the water hose and filters the water before it is introduced into the tank.
● Filters suspended particles up to 5 microns, bad taste / smell and chemical impurities, such as chlorine, phosphates, suspended matter, etc.
● Size: ● Total length (without spouts) 195 mm, ● diameter 55 mm. ● Max. Flow rate: 9 l / min. ● Max. Operati...
80 micron filter, descaling, washable
Designed to be mounted along with the piping that carries water onto the berth. Filters water that goes onboard and that contains lime residues that clog the pipework; fitted with 2 snap-in joints.
Osculati Adaptador de manguera Ø 16mm
● Tank Hose Adapter ● Made of nylon. ● 90° elbow fitting. Code Dimensions 52.199.16 Hose adaptor Ø 16 mm 52.199.38 Hose adaptor Ø 38 mm
GOBIUS C Adapter for Metal Tanks
● Entrance for Flexible Water Deposit ● Specific adapter for the installation of the Gobius C sensor in a metallic tank or any other tank that has a pre-existing hole. ● For tanks with S3 flange, use this adapter to install the Gobius C sensor. ● For S5 flanges, mate the Gobius C adapter with the flange 52.746.10. ● Screw the adapter into existing 1.25" (SAE 5) Wema and KU...
VETUS Inspection Lid with Moulded Thread and O-Ring
VETUS Inspection Lid with Moulded Thread and O-Ring.
