Power Supply
● Input supply voltage: 10 to 35 V CC
● Input supply current: 325 mA máx. to 12 V CC (all outputs to full drive into 100 ohms)
● Input protection: Continuous reverse polarity, transient overvoltage and ESD protection.
● Power indicator: LED Blue, indicates unit is functioning correctly.
● Input Supply Connector: Pluggable 2-way screw terminal, 5.08 mm pitch.
NMEA 0183 Port: Listener and Talker
● Number of listener/Inputs Ports: 2 isolated NMEA 0183 listeners.
● Number of talker/outputs ports: 12 isolated NMEA 0183 talkers.
● Compatibility: Fully NMEA 0183, RS422 and RS232 compatible. RS485 listener compatible.
● Speed/ baud rate: 4800 to 38400 bps
● Talker output voltage drive: >= 2.2V (diferencial) into 100 ohm
● Talker output current drive: 20 mA maximum per output.
● Talker output protection: Short circuit and ESD.
● Talker data indicator: LED, orange (Flashes at data rate)
● Listener input voltage tolerance: -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
● Listener input protection: Current limited, overdrive protection to 40 VDC and ESD protection.
● Listener data indicator: LED, green (flashes to indicate valid input).
● Connectors: Pluggable 2/3-way screw terminals 5.08 mm pitch.
Serial Port
● Compatibility: RS422 and RS232 compatible. RS485 listener compatible
● Speed/baud rate: 4800 to 115200 bps
● Output voltage drive: >= 2.1V (differential) into 100 ohm
● Output current drive: 20 mA máx.
● Output protection: Short circuit and ESD
● Input voltage tolerance: -15 V a +15 V continuous, -35 V a +35 V short term (< 1 second)
● Input protection: Current limited, overdrive protection to VDC and ESD protection.
● Data indicators: LED's: green = receive, orange = transmit
● Connectors: Pluggable 3-way screw terminals, 5.08 pitch.
Ethernet Port
● Host interface: 10/100BaseT, automatic polarity detection.
● Supported protocols: TCP/IP for configuration and firmware updating, TCP and UDP for NMEA 0183 comms.
● Indicators: Green = link/activity, yellow = 100 Mbps
● Connector: RJ45
Isolation
● NMEA 0183 listener: OPTO-isolated, Hi-Pot tested to 1000V
● NMEA 0183 talker: Uses IsoDrive TM , Hi-Pot tested to 1000V
● Serial Port: Uses IsoDrive TM , Hi-Pot tested to 1000V
● Alarm relay: Hi-Pot tested to 1000V
● Ethernet port: 2kV for 60s
Mode Inputs
● Input voltage range: 0 to 35V CC
● Protection: Transient overvoltage and ESD protection.
● Connectors: Pluggable 2-way screw terminals, 5.08 mm pitch.
Alarm Output
● Contacts: Common, normally open and normally closed.
● Alarm indicator: LED, red indicates a valid alarm condition.
● Contact ratings: 35 VAC / 50 VDC
● Connectors: Pluggable 3-way screw terminals, 5.08 mm pitch
Mechanical
● Housing material: 316 stainless steel.
● Dimensions: 210 mm (width) x 128 mm (height) x 27 mm (depth)
● Weight: 530g
● Mounting: Bulkhead mount or DIN rail mount (DIN kit 1)
Approvals and certifications:
● EMC: IEC 60945:2002-08, DNVGL-CG-0339:2019 e IACS UR E10 Rev7
● Compass safe distance: 750 mm
● Type approval certificate: RINA
● Operating temperature: -25 to +70°C
● Storage temperature: -40 to +85°C
● Relative humidity (HR) 95% @ 55°C
● Environmental protection: IP40
