Automatic Pilot

Simrad PRE60 pushrod extension, 60 mm (2.4 in) length. This accessory is designed to adjust the installation depth of Simrad navigation control systems, allowing for precise and secure connection. Manufactured to ensure proper integration in standard deck configurations. Technical details Simrad PRE60 pushrod extension 60 mm (2.4 in) length for depth adjustment Designed for Simrad navigation c... read+

Simrad model PRE90 pushrod extension accessory, designed to extend the pushrod by 90 mm. This component allows for the depth adjustment of Simrad navigation control systems, facilitating access to controls from the console. Manufactured for precise integration with compatible brand equipment. Technical details Simrad PRE90 pushrod extension 90 mm (3.6 in) extension length Mounting accessory fo... read+

Simrad TB120 Tiller Bracket, 120 mm (4.8 in) length. Designed for the secure installation of Simrad instruments on boats. Allows optimal MFD placement for improved visibility and access while navigating. Technical details • Material: Aluminum• Length: 120 mm• Compatibility: Simrad instruments Includes 1x Simrad TB120 Tiller Bracket read+

Simrad Tiller bracket 30mm (1.2 in) reference TB30. Official description: Tiller bracket 30 mm (1.2 in). Official details: TB30. Technical details Simrad TB30 30 mm (1.2 in) Tiller Bracket for Autopilot Systems read+

Tiller mounting bracket for Simrad model TB60, specifically designed for navigation instruments with a 60 mm diameter. Made of durable material to ensure secure and stable fixation of the chartplotter during navigation. Compatible with standard tiller configurations, allowing direct and secure installation of Simrad devices. Technical details Simrad TB60 Tiller Bracket Mounting diameter: 60 mm... read+

Tiller bracket model TB90 by Simrad. Designed for the mounting of navigation instruments on the tiller bar. Dimensions: 90 mm (3.6 in). Official reference: TB90. Technical details Simrad TB90 Tiller bracket for mounting on the tiller bar Dimensions: 90 mm (3.6 in) Compatible with Simrad navigation instruments Includes Simrad TB90 Tiller bracket read+

New Light House interface easy to configure. Specifications Reference Model Version Power supply Display Resolution 29.603.02 p70s Push button control Via STNG network LCD 3.5" 320x240 (QVGA) 29.603.03 P70Rs Push button/knob control Via STNG network LCD 3.5" 320x240 (QVGA) read+

The Evolution™ Autopilot Package includes the control unit, the EV-1 sensor, the power unit and an actuator. The most suitable actuator and ACU depends on the type of steering system and on the displacement of the vessel. Specifications Reference Description Type of vessel Package components - EV Package components - ACU Package components - Rudder angle Package components - control un... read+

Electric drive unit for tiller-steered sailing boats up to 6,000 kg (13,000 lbs.) displacement.   Cockpit Tiller Drive • For boats up to 6,000 kg (13,000 lbs.) displacement • For 12-Volt DC Systems • Works with ACU-100 read+

Wireless remote control for Raymarine Evolution series autopilots, with colour display, Point-and-Go function, Solo Sailor mode and portable operation from any point on board. Requires WG-1 gateway.The Raymarine RCU-1 is a wireless remote control designed to operate Raymarine Evolution series autopilots with greater freedom, comfort and safety on board. It is the system's handheld controller, i... read+

Autopilot drive for boats with hydraulic steering 50 to 110cc (3.1 - 6.7 in3) and 12-volt power systems.   Type 0.5 Autopilot hydraulic pump for 12 volt systems • For 12-Volt DC Systems • Works with ACU-100 read+

Evolution autopilot sensor core for traditional steering systems   Evolution Autopilot EV-1 sensor core • Waterproof to IPX6 and IPX7 standards • Convenient above or below decks mounting. Surface and bulkhead mounts included.   In the box • Mounting trim • EV unit • Sealing ring • Mounting tray • Wall mounting bracket • Screws for deck or bracket mounting • Screws for wall bracket • D... read+

Evolution autopilot sensor core for vessels with drive-by-wire steering   In the box • Mounting trim • EV unit • Sealing ring • Mounting tray • Wall mounting bracket • Screws for deck or bracket mounting • Screws for wall bracket • Documentation • SeaTalkng spur cable 1 m (33 ft)   Specifications Environmental • Relative humidity: Max. 93% • Waterproof rating: IPx6 • Storage temperatu... read+

Raymarine ACU-100 actuator unit for type 0.5 reversible hydraulic units, wheel drive and tiller. Nominal power supply 12V, features rudder reference sensor, motor unit, ground. Operating manual: ESPRaymarine presents the ACU-100 control unit for Raymarine's new Evolution autopilot series. The actuator is designed for type 0.5 reversible hydraulic units, wheel drive and tiller. It features a ru... read+

Evolution autopilot actuator control unit for Type 1 hydraulic, mechanical linear, and rotary drives   In the box • ACU unit • Rudder angle reference sensor / transducer (supplied with specific system packs only) • Cable ties • Mounting screws • Documentation   Specifications Output • Drive clutch output: Up to 2.0 A continuous, selectable between 12 / 24 V • Drive current output: Max... read+

Autopilot control head for Evolution autopilots with intuitive push-button operation designed for sailboat installations   In the box • Suncover • Gunmetal bezel • p70s or p70Rs (p70s shown) supplied with keypad and black bezel fitted • Panel seal gasket • Documentation • Suppression ferrite • Mounting fixings x 4 (M3x16 panhead pozi screws) • 400 mm (15.7 in) SeaTalkng spur cable   S... read+

Autopilot control head for Evolution autopilots. Push buttons and rotary control designed for powerboat installations   In the box • Suncover • Gunmetal bezel • p70s or p70Rs (p70s shown) supplied with keypad and black bezel fitted • Panel seal gasket • Documentation • Suppression ferrite • Mounting fixings x 4 (M3x16 panhead pozi screws) • 400 mm (15.7 in) SeaTalkng spur cable   Spec... read+