By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Marco UP1-N Self Priming Pump
● Voltage: 12 Voltis ● Ampere: 15 Amperes ● Capacity: 35 l/min ● Weight: 2,8 Kg ● Dimensions (W x H x L): 120 x 94 x 176 mm ● Thread diameter: 1/2" ● Tubo diameter: 25 mm ● Thrust: 8 m ● Pressure: 0,8 Bars ● Head: 1.5 m
WHALE Supersub submersible bilge pump
● Can be mounted either vertically or horizontally, fitted with low profile for installation in any surface; low consumption level, assemble/disassemble the pump and snap-in filter to ease cleaning procedures; suction at a minimum level of just 10 mm. ● Voltage: 12 V ● Mounting: horizontal/vertical ● Consumption: 2.5 A ● Capacity l/h at 0/1/2 m: 1900/1500/925 ● Hos...
Sumergible Bilge Pump 5700 12V TMC
● Motor protected by rubber boot for a total sealing and better cooling ● Metal Seat ● Voltage: 12 ● Power consumption: 8 Amp ● Ø Output: 1 1/8 "(28.6 mm) ● Pump Ø: 121 mm ● Dimensions (L x W x H): 144.3 x 120.5 x 164.5 mm ● Delivery head: 3 m ● Fuse: 10 Amp
Sumergible Bilge Pump TMC 1500 24V
● Motor protected by rubber boot for a total sealing and better cooling ● Metal Seat ● Voltage: 24 V ● Power consumption: 4 Amp ● Output Ø : 1 1/8 "(28.6 mm) ● Pump Ø: 121 mm ● Height: 16.5 cm ● Weight: 1.25 kg ● Fuse: 5 Amp
Sumergible Bilge Pump TMC 2500 12V
● Motor protected by rubber boot for a total sealing and better cooling ● Metal Seat ● Voltage: 12 V ● Consumption: 17 Amp ● Output Ø : 1 "1/4 (31.8 mm) ● Pump Ø: 132 mm ● Height: 19.5 cm ● Weight: 2.1 Kg ● Fuse: 20 Amp
Sumergible Bilge Pump TMC 3000 12V
● Motor protected by rubber boot for a total sealing and better cooling ● Metal Seat ● Voltage: 12 V ● Power consumption: 18 Amp ● Output Ø : 1 "1/4 (31.8 mm) ● Pump Ø: 132 mm ● Height: 19.5 cm ● Weight: 2.4 Kg ● Fuse: 22 Amp
Rule Automatic Bilge Pump 51S 12V
High pumping capacity and reliability at a lower cost. The Rule 51S 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC. Features and Benefits ● Fully Submersible ● Easy clean snap lock strainer ● Silent and vibrationless operation ● Anti-airlock protection ● Compact, efficient long life motor ●...
Rule Automatic Bilge Pump 53S 12V
The automatic bilge pump is engineered to commercial standards. It is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. Features and Benefits ● Fully automated bilge pump with integral float switch ● For medium sized yachts and motor cruisers ● Tough plastic body ● Quick release inlet strainer allows rapid cleaning ● Low amp draw conserves bat...
Rule Manual Bilge Pump 3700 12V
Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet. Features and Benefits ● High capacity pump for larger yachts and motor cruisers ● Tough plastic body ● Quick release inlet strainer allows rapid cleaning ● Motor rated for 2500-hour life ● Ignition protected ● For automatic operation use Rule Float...
Rule Automatic Bilge Pump 3700 12V
Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet. Features and Benefits ● High capacity pump for larger yachts and motor cruisers ● Tough plastic body ● Quick release inlet strainer allows rapid cleaning ● Ignition protected Performance ● Discharge outlet: 38 mm (1.5") ● Capacity: 3700 gph (open f...
Rule Manual Bilge Pump 4000
Designed for the toughest applications, the 4000 gph (15140 lph) pump optimizes Rule's exclusive design features to produce the highest capacity available for a pump its size. 2" (51mm) discharge outlet. 12 Volts DC unless noted. Features and Benefits ● High capacity pump for larger yachts and motor cruisers ● Tough plastic body ● Quick release inlet strainer allows rapid cleaning ● Ignition pr...
Rule Automatic Bilge Pump 4000 12V
Designed for the toughest applications, the 4000 GPH (15137 lph), pump optimizes Rule´s exclusive design features to produce the highest capacity avaliable for a pump its size. 2" (51mm) discharge outlet. Features and Benefits ♦ Fully automated bilge pump with computerised operation ♦ High capacity pump for larger vessels ♦ Quick release inlet strainer allows rapid cleaning ♦ Ignition protected...
Johnson Pump Viking Power 16 12V Bilge Waste Water Pump
● Compact shower drain, bilge and waste water pump. Specifically designed to pump waste water, the Viking Power 16 is an ultramodern, single-chamber self-priming diaphragm pump that can be set up in several different pump/motor configurations. ● Perfect for installation in tight spaces, the Viking Power 16 can be installed anywhere after the drain outlet in the wastewater syste...
Attwood WaterBuster Portable Power Pump
● This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe, too, because it needs no electrical cord – runs up to 5 hours on three alkaline D batteries. ● Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dingies and kayaks. Any craft that lacks a hard-wire, permenent electri...
750GPH 12V Bilge Pump
Manufactured by Seaflo but white-labelled ● All-in-one pump and float switch. ● No additional float switch is required. ● The pump turns on when the water level rises and shuts off when water is withdrawn. ● Specifications: Flow rate: 750 GPH Volts: 12 V Max Draw: 2.5 A Head: 3.0 m Wire lead: 1 m Outlet Diameter: 19 mm / 3/4" Weight: 520 gr
Bilge Pump 1500 GPH
Manufactured by Seaflo but white-labelled ● Current: 7 A ● Volts: 12 V ● Flow rate: 5678 lph ● Wire lead: 100 cm ● Head: 5 m
Bilge Pump 2000 GPH
Manufactured by Seaflo but white-labelled ● Current: 9 A ● Volts: 12 V ● Flow rate: 7570 lph ● Wire lead: 100 cm ● Head: 6 m
Bilge Pump 3000 GPH
Manufactured by Seaflo but white-labelled ● Current: 16 A ● Volts: 12 V ● Flow rate: 11356 lph ● Wire lead: 100 cm ● Head: 6 m
Johnson Pump Viking Power 16 24V Bilge Waste Water Pump
● Compact shower drain, bilge and waste water pump. Specifically designed to pump waste water, the Viking Power 16 is an ultramodern, single-chamber self-priming diaphragm pump that can be set up in several different pump/motor configurations. ● Perfect for installation in tight spaces, the Viking Power 16 can be installed anywhere after the drain outlet in the wastewater syste...
Jabsco Low Pressure Cyclone Centrifugal Pump
● Flow rate: 110 Litres/min (29.7 gallons/min) ● Pressure up to 0.6 bar (8.7psi) ● Heavy duty robust stainless steel construction ● One tool servicing (3/8" Spanner) ● Virtually silent running centrifugal pump ● Long-life DC motor ● Rotatable head 90° segments ● Anti-clogging impeller design ● Long-l...
Whale Supersub Smart650 Automatic Bilge Pump
● Low profile automatic pump suitable for limited spaces. Fitted with integrated field sensor switches, no maintenance required. Excellent functioning even in case of dirt, oil, fuel, etc. Easy-access filter. ● Volt: 12 V ● Consumption: 3.4 A ● Flow l/min at 0/1 m: 40/34 ● Hose conector: 19 mm
Whale Supersub Smart1100 Automatic Bilge Pump
● Low profile automatic pump suitable for limited spaces. Fitted with integrated field sensor switches, no maintenance required. Excellent functioning even in case of dirt, oil, fuel, etc. Easy-access filter. ● Volt: 12 V / 24 V ● Consumption: 4.3 A (12 V) / 2.2 (24 V) ● Flow l/min at 0/1 m: 69/45 ● Hose conector: 25-28 mm
Whale Orca Series Bilge Pump
● High performance; easy installation; very compact and can be easily inspected; hydrocarbon resistant body; large built-in filter on the casing, which provides great capacity even with debris; EC type approved in accordance with ISO 8849 standards; 3-year warranty. Ref.: Flow Volt Consumption Hose adaptor Max. prevalence Dimensions (H x W x D) 1655012 32 l/min 12 V 1,5 A 19 mm...
Whale Shower Waste Water Drain Pump Gulper 320
● Based on a 10-year experience of Gulper 220, provides the same reliability with 35% more flow. Improved features with respect to the 220 model: 1)“EZI-CLAMP” patent the enables a 360º turn without the risk of losing screws. 2)3-foot design for quick and easy installation. 3)rubber support belt 4)Hose adaptor for pipes Ø 25 mm and 19 mm.
