Pumps for Inboard

Bronze cooling pump with neoprene impeller. • Johnson ref. 10-24014-02 • Vetus ref. STM 8922 • OEM for Vetus engines M2.05 / M2.06 / M2.D5 / M3.09 / M3.28   Specifications • Lt/min: 107 • ø Ports: 1"1/4 read+

Bronze cooling pump with neoprene impeller and non-threaded ports with flange. Johnson ref. 10-24014-01. Jabsco ref. 9700-21.   Application for Iveco-Aifo, Perkins, Valmet and VM engines: • Iveco-Aifo: 806 / 8060 / 8061 / 821 / 8220 / 8361 / CO3M • Perkins: 6.3540M / 6.305 / 6.354 / 6.3543M / 6HD 135-15D/T-H-HT / 6.354LL • Valmet: 311 / 411 / 411 CM-CSM • VM: 114 / 116 MH   Specificat... read+

The VETUS STM6109B is an original VETUS raw water/seawater pump for certain VETUS marine diesel engines. Its function is to draw water from outside the boat and circulate it through the engine cooling system. This water removes heat from the system and is subsequently discharged together with the exhaust gases. It is a mechanical pump driven by the engine itself, not an electric pump. It contai... read+

Bronze pump Jabsco 29500 series bronze pump with 28 mm port and 40 mm flange, for reliable use in industrial and marine environments.Technical specifications:- Port: 28 mm- Flange: 40 mm read+

Brass pump 17810-1300 Jabsco bronze flexible impeller pump, flanged version, size 200, with square flange connections and neoprene impeller.Technical specifications:- Pump size: 200- Connections: square flange with 50.8 mm bore- 1/1 cam, neoprene (NEO) impeller read+

Bronze pump 6400-1051 Jabsco bronze engine cooling pump with 1-1/4" (32 mm) ports and neoprene impeller, suitable for water pumping and general use, it can prime at low or high speed.Technical specifications:- Nominal flow: 235 litres/min at 1750 rpm- Dry vertical suction lift up to 6.7 m (22 ft) for 30 seconds read+

Brass pump 17970-0100 Jabsco replacement engine cooling pump for Caterpillar engines, bronze, with 2 1/2" flanged connection.Technical specifications:- Flanged connection: 2 1/2" read+

Bronze pump 80 L/min Jabsco bronze size 080 flexible impeller pump, self-priming up to 5 m, with pump body and flange adapter for coupling to electric motors.Technical specifications:- Flow: up to 80 litres/minute- Self-priming up to 5 m- Suitable for electric motors with 19 mm IEC 71 B3/B14 D80 frame (120 mm flange, 100 mm bolt circle, 7 mm holes)- Stainless steel stub shaft extension include... read+

Bronze pump 80 L/min Jabsco bronze size 080 flexible impeller pump, self-priming up to 5 m, with pump body and flange adapter for coupling to electric motors.Technical specifications:- Flow: up to 80 litres/minute- Self-priming up to 5 m- Suitable for electric motors with 19 mm frame, IEC 71 B3/B14 D80 (120 mm flange, 100 mm bolt circle, 7 mm holes)- Includes stainless steel stub shaft- Compat... read+

Bronze pump 200 L/min Jabsco bronze flexible impeller pump with flange adapter pump head, 1-1/2" BSP ports, dry self-priming up to 2.4 m.Technical specifications:- Dry self-priming up to 2.4 m (7.8 ft)- Ports: 1-1/2" BSP- Nominal flow rate 200 l/min (4.4 gal/min) at 1500 rpm read+

Bronze pump F7B-9 Jabsco bronze self-priming cooling water pump, size 80, with 32 mm (1 1/4") hose connections.Technical specifications:- Pump size: 80- Hose connections: 32 mm (1 1/4") read+

Bronze pump BG020 Jabsco BG 020 bronze flexible impeller pump, crank shaft version, with 25 mm (1") hose connection.Technical specifications:- Flow rate: nominal 20 litres/min at 1,500 rpm read+

Bronze pump 29600-1001 Jabsco bronze size 80 flexible impeller pump, flange mounted, with stainless steel shaft and mechanical seal to reduce wear.Technical specifications:- Pump size: 80, 1/1 cam version- Neoprene impeller included- 1/1 cam version,- Bronze pump housing with 6-hole round mounting flange (outer diameter 94 mm, staggered mounting diameter 60 mm)- Driven by 19 mm shaft end with ... read+

Bronze pump 29640-1001 Jabsco self-priming cooling water pump, size 080, with bronze body and flange, stainless steel shaft and mechanical seal.Technical specifications:- Pump size: 080, 1/1 cam design- Neoprene impeller included- Connections: 32 mm (1-1/4") hose read+

Bronze pump 29880-0001 Jabsco bronze engine cooling pump, size 470 (2.75").Technical specifications:- Pump size: 470 (2.75") read+

Bronze pump 1" electromagnetic friction Jabsco 1" BSP bronze electromagnetic clutch pump with flexible impeller.Technical specifications:- Ports: 1" BSP- Pump length: 160 mm, pulley diameter: 180 mm- With 2.5 A fuse: flow 80 litres/minute at 1500 rpm and total head of 3 m read+

Bronze pump 3/4" Jabsco bronze self-priming cooling water pump, 3/4" BSP ports, neoprene impeller included.Technical specifications:- Ports: 19 mm (3/4") BSP female thread- Neoprene impeller included- Flow rate: Nominal 40 litres/min at 1,500 rpm- Length: 240 mm- Width: 110 mm- Height: 130 mm (130 mm) read+

Bronze pump 1" Jabsco bronze self-priming cooling water pump, 1" BSP ports, neoprene impeller included.Technical specifications:- Ports: 25 mm (1") BSP female thread- Neoprene impeller included- Flow rate: Nominal 80 litres/min at 1,500 rpm read+

Bronze pump 2" Jabsco 2" bronze pump with flange, 270 L/min flow.Technical specifications:- Flow rate 270 L/min- Prevalence 4.5 m- Dimensions 280x170x128 mm- Weight 5 kg read+

1-1/2" bronze pump with 24V electromagnetic clutch flange Jabsco 1-1/2" bronze electromagnetic clutch pump, size 200, foot mounted with flanged ports, for heavy-duty bilge and deck wash.Technical specifications:- Voltage: 24 V- Self-priming up to 3 m vertical lift- 24 volt DC electric clutch with 2 A pulley- Connections: flanged ports with 1½‘ nominal bore with 1½’ BSP counterflanges- Fuse siz... read+

2" bronze pump with 12V electromagnetic clutch Jabsco bronze electromagnetic clutch pump, self-priming, with neoprene flexible impeller, for heavy duty. 12 V version with carbon/ceramic mechanical seal.Technical specifications:- Ports: 2" BSP female- Length: 270 mm, pulley diameter: 180 mm (2A pulley), 173 mm between ports- Flow: 267 litres per minute (59 gallons) at 3 metres total head read+

Bronze pump 2" electro,AGNETIC friction 24V Jabsco bronze electromagnetic clutch pump, self-priming, with neoprene flexible impeller, for heavy duty. 24 V, 2-inch version with carbon/ceramic mechanical seal.Technical specifications:- Size: 2 inch read+

Bronze pump 1,25" Jabsco 1.25" bronze flexible impeller pump.Technical specifications:- Bronze pump read+

Bronze pump 1" electromagnetic friction Jabsco bronze electromagnetic clutch pump, self-priming, with neoprene flexible impeller, for heavy duty. 24 V, 1-inch version with carbon/ceramic mechanical seal.Technical specifications:- Size: 1 inch read+