B&G

The high-bright Zeus² Glass Helm ZM 16-inch display integrates with even the largest luxury helm stations, featuring a stunning low-profile glass bridge design for more screen and less border. High-definition widescreen displays enable more information to be presented on the console, enhancing the user experience. Intuitive control Higher definition LCD panels allow the user to see a large... read+

The B&G ZM19-T monitor features a low-profile glass helm design, maximizing the screen area while minimizing borders. High-definition widescreen displays allow more information to be presented on the screen, enabling the user to see a larger area of the chart in full detail at a defined zoom level. Key benefits For an echo sounder panel, more vertical pixels provide greater vertical resolut... read+

The AIRMAR IDST800L 235F transducer is a high-precision device designed for simultaneous depth and water temperature measurement. Key benefits With a frequency of 235 kHz and an 8° beam angle, it offers a narrow coverage cone for detailed resolution in deep waters. Its robust construction ensures reliability in demanding marine conditions. Integration and compatibility The model includes a ... read+

The Forward Scan transducer can be removed from its stainless steel sleeve for maintenance. Alternatively, new boats may be fitted with an empty sleeve to allow easy on-water installation of the Forward Scan transducer at a later date. Key benefits The sleeve features a self-closing valve to minimize water ingress when the transducer is first removed, but a blanking plug is required to provide ... read+

For optimal accuracy and performance, the Forward Scan transducer must be installed parallel to the waterline. This fairing block supports the level installation of the standard Forward Scan transducer, ensuring precise alignment for superior sonar performance. Key benefits The block is designed to be cut to accommodate various hull thicknesses, providing a secure fit for different boat structu... read+

This kit includes replacement O-ring seals for the Forward Scan transducer. O-rings should be checked and replaced if necessary before installing the transducer insert into its stainless steel sleeve. Key benefits This component ensures a proper seal during installation. Timely replacement of these parts guarantees equipment integrity. It ensures direct compatibility with original Forward Scan ... read+

80-meter VMHU cable designed for data and power transmission in B&G navigation systems. Enables seamless integration of instruments and sensors on the mast, ensuring a stable signal and secure installation in demanding marine environments. Technical details 80-meter VMHU mast cable for B&G navigation systems Data and power connection for mast-mounted instruments and sensors Designed fo... read+

B&G 213 Mast Cable, 80 meters long. Designed for marine environments, it provides data and power transmission with 213 connectors that are waterproof and corrosion-resistant. Compatible with B&G navigation systems to ensure a reliable and durable connection. Technical details B&G 213 Mast Cable, 80 meters long Includes 1x B&G 213 Mast Cable, 80m read+

Pair the BT-1 Bluetooth Base Station with a WR10 Remote to remotely control the direction of your boat. This device allows you to adjust the heading of your vessel from a distance. Integration and compatibility The connection ensures a stable and secure operation between components. Key benefits With this setup, you can make course changes of 1 or 10 degrees with precision. The product is sold ... read+

Custom-fitted protective cover for the B&G Vulcan 7 plotter in flush mount configuration. Designed to shield the screen from direct sunlight, rain, and dust, this high-resistance cover ensures device longevity. Its specific design guarantees a perfect and discreet fit, preserving the equipment's integrity in demanding marine conditions. Technical details Custom-fitted protective cover for ... read+

U-BRACKET 7 wall mount designed for Simrad chartplotters from the Zeus S, GO, and VULCAN series. This accessory allows for the fixed installation of 7-inch units, ensuring a stable and secure position on the boat. Compatible with the models specified by the manufacturer for proper integration. Technical details U-BRACKET 7 wall mount for Simrad chartplotters Compatible with Simrad Zeus S, GO, ... read+

This mounting kit is specifically designed for the installation of the HALO SPARE radar, ensuring a secure and durable attachment to the vessel's structure. The package includes four 12x35 mm hex bolts made of 316 stainless steel, ideal for demanding marine conditions. Key benefits Four 12x50 mm hex bolts made of 316 stainless steel are provided to secure the device base. To ensure uniform load... read+

This 4-way block allows you to connect up to four Micro-C devices to a NMEA 2000 network, ensuring stable, low-loss data transmission. Designed for demanding marine installations, it facilitates network expansion without compromising signal integrity. Its compact and robust design ensures a secure and durable connection in wet and salty environments. Technical details 4-way joiner connector fo... read+

10-meter waterproof HDMI cable, Simrad reference 000-12741-001. Standard male (STD M) connectors on both ends, designed for marine environments. Ensures high-definition signal transmission without interference, with moisture and corrosion-resistant construction. Ideal for fixed installations on boats. Technical details 10-meter waterproof HDMI cable for marine use Standard male connectors on b... read+

Simrad 3m Waterproof HDMI Cable designed for marine and outdoor environments. Featuring a robust build and full weatherproofing, it ensures stable signal transmission free from interference. Ideal for connecting entertainment and navigation systems on boats, withstanding extreme conditions of humidity, saltwater, and UV exposure. Technical details 3m waterproof HDMI cable for marine environmen... read+

Mounting bezel specifically designed for Simrad GO5 and V5 displays. This accessory allows for a clean and secure installation on the dashboard, providing a professional finish that integrates the plotter into the console. The kit includes all necessary components to secure the device without requiring additional adapters, ensuring a firm hold and a refined aesthetic. Technical details Compati... read+

Official Simrad cable (Ref. 000-13171-001) designed for GO5, GO5 Plus, and V5 chartplotters. Enables power supply and data communication via NMEA 2000 network. Ensures reliable integration with boat navigation and instrument systems. Original product with compatibility guarantee. Technical details Power and NMEA 2000 data cable for Simrad GO5, GO5 Plus, and V5 chartplotters Direct connection t... read+

This extra heavy-duty gimbal bracket is specifically designed for desk-mounting the M5000 IMO monitors, Simrad MO-Series Touch Monitors, and B&G ZM-Series Monitors. It is also compatible with the NSO evo3S MFD and Zeus3S Glass Helm Displays. Key benefits The robust construction ensures superior stability for these navigation devices. The kit is certified for bridge use, complying with the m... read+

This stainless steel sleeve allows the Forward Scan Long Stem transducer to be installed through hulls up to 47.6 mm (1 7/8 inches) thick, and at up to 28 degrees deadrise when used with a suitable fairing block. A self-closing valve allows the transducer to be installed or removed on the water; this simplifies maintenance and allows easy removal to protect the transducer while trailering or st... read+

The GPS-500 antenna is specifically designed for the NAIS-500 AIS transceiver, ensuring precise and stable GPS signal reception. Its simple installation allows for quick integration into marine navigation systems, ensuring the reliability of real-time positioning data. Technical details High-sensitivity GPS antenna for precise positioning in marine navigation systems Compatible with the NAIS-5... read+

The Simrad SD10 mechanical drive unit is an essential component for the NAC-2 autopilot system. Key benefits Designed to convert electronic signals into mechanical movement, this unit ensures fast and precise rudder response. Its robust construction ensures consistent performance in demanding marine conditions, keeping the vessel on course with accuracy. The installation is straightforward and ... read+

Dashboard mounting kit specifically designed for the installation of the Simrad GO9 plotter. This accessory allows for a seamless and secure integration into the boat's console, ensuring an optimal viewing position for comfortable and safe navigation. The kit includes all necessary components for a professional and stable installation. Technical details Dashboard mounting kit specifically desi... read+

Original replacement bezel for the Simrad GO9 display. Designed to restore the unit's appearance and perfect fit. Made from durable materials that protect the unit from daily wear and impact. Ensures easy installation and full compatibility with the GO9 model. Technical details Original replacement bezel for the Simrad GO9 display Designed to restore the unit's appearance and perfect fit Made ... read+

This white suncover is specifically designed for the Vulcan 9 display units. Constructed from durable thermoplastic material, it provides a robust shield against external elements. Key benefits Its primary function is to protect the chartplotter from exposure to wind, fog, and salt spray. The cover's structure ensures adequate coverage to keep the equipment in optimal condition. This accessory ... read+