By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Flow Meter 10-180 Ohms
● 10-180 Ohms ● Vertical sender in stainless ● Steel for water/fuel 12/24V ● For instruments: Yazaki, mod. 3 wires, Faria Europa, VDO, Uflex, Guardian.
Fuel Level Indicator 33-240 Ohms
● For 12V installations ● Ø: 52 mm ● Tank depth: 130/660 mm Instalation Manual
Universal Lever Floater
● Tank depth: 130 / 660 mm ● Impedance 240-33 ohmios: Teleflex, Faria USA, Vetus, S.Giorgio Sein, Beede, Medallon) ● Impedance 10-180 ohmios: VDO, Yazaki, Faria Europa, Uflex, Guardian)
240-33 Ohms Axial Vertical Floater
● Ideal for either fuel or water, 5 hole international flange. ● 240/33 Ohms.
Nuova Rade Lever Floater Fuel
● Lever Floater for deposits Fuel and Diesel tanks Code Height (mm) Impedance (Ohm) Suitable for 197070 195 0-190 Mistral 197077 233 For custom made tank 197180 272 197068 293 197066 315 197067 330 197073 195 197075 233 197076 293
Mechanical Level Indicator Fuel Tank
● Mechanical Level Indicator Fuel Tank Code Tanks Height (cm) Suitable for tanks 5203700 30 5203301 - 5203302 - 5203303 - 5203309 - 5203310 5203701 23 5203304 - 5203305 - 5203306 5203702 28 5203321 - 5203322 - 5203323 5203703 40/41 5203307 - 5203308 - 5203324 - 5203325 - 5203326
Code Depth (cm) Width (cm) Height (cm) Liters 5203301 35 50 30+3 42 5203302 35 65 30+3 55 52...
CanSB Cap with Vent and Fuel Gauge H160
● New cap H.160 with vent and fuel gauge. ● Suitable for: SE2003, SE2010
Seachoice Electric Fuel flume
● It can be used for gasoline or diesel. ● Made in non-ferrous materials compatible with impedances 35-240 ohms. ● floating arm that can rotate in 90 ° steps to ensure being in an open area of walls or baffles.
Seachoice Fuel Gauge Kit
● It can be used for gasoline or diesel. ● Made in non-ferrous materials compatible with impedances 35-240 ohms. ● floating arm that can rotate in 90 ° steps to ensure being in an open area of walls or baffles. ● Depth: 15.25 cm to 68.5 cm ● Fuel gauge bezel low profile black for ground systems 12 V negative. ● With Light Kit
CanSB Mechanical Fuel Gauge
● CanSB Mechanical fuel gauge Ref Length (mm) Suitable for: MI2160 220 SE2023/24/25/84/85/86/87/88/89/90 MI2160 270 SE2020/21/22/33/34/35 MI2160 290 SE2026/27/28/91/92/93/94/95/96/97 MI2160 400 SE2029/30/36/37/38
CanSB Cap with Vent and Fuel Gauge H200
● New cap H.200 with vent and fuel gauge.
● Suitable for: SE2002 SE2004 SE2011 SE2012
Gauge with NMEA 2000 outlet signal
● Suitable for fuel. 5-bore intenational flange. Any lengh can be supplied with an order for at least 10 pieces. UNiversal 12/24V. Stainless steel body.
Code Length mm V 27.165.17 170 12/24 27.165.20 200 12/24 27.165.22 225 12/24 27.165.25 250 12/24 27.165.30 300 12/24 27.165.35 350 12/24 27.165.40 400 12/24 27.165.45 450 12/24 27.165.50 500 12/24 27.165.55 550 12/24 ...
Can-Sb Mechanical fuel gauge
Article Height (mm) Used for MI3950 190 SE2084-86-86-87-88-89-90 MI3951 220 SE2023-24-25 MI3952 265 SE2020-21-22, SE2033-34-35 MI3953 285 SE2026-27-28, SE2091-92-93-94-95-96-97 MI3954 370 SE2029-30, SE2036-37-38
Osculati Fuel Gauge with NMEA 2000 Output
• International flange S3. • Suitable for 12 and 24 V systems. • IP65 external protection. • Made of stainless steel. The level sensors are programmed to indicate tank usage and, if communicated when ordering*, the volume will be expressed in litres rather than percentage. If there is more than one tank for the same liquid on board, the numbering of ...
Vetus Fuel Tank Gauges
Fuel filler for rigid petrol and diesel fuel tanks with a height between 140 and 660mm. • Both the vertical stem and the float arm are fully adjustable. • All VETUS level gauges are complemented by these tank gauges and can be connected directly to each other to give an accurate reading. • To connect other makes of level indicators to a VETUS gauge, a signal converter (code EP46849) m...
Veratron VDO Fuel Tank Sender Unit
Click here for more information.Installation instructionsSpecifications
Veratron VDO Sender Unit Gasket Kit
Click here for more information.
Sensor for Fuel & Water Tank (12/24V, Inox 316, SAE5)
Level sensor for fuel and water tanks, made of 316 stainless steel with SAE5 connection, suitable for 12 and 24 V.
Material: made of 316 stainless steel
Connection: SAE5 connection
Voltage: suitable for 12 and 24 V
Dimensions: measures 225 mm high
Compatibility: suitable for Diablo 230 mm tanks
Output options: available with 0-190 Ohm or 240-33 Ohm output, depending on the gauge to be used
