Ctek

● The MXS 0.8 is  CTEK's smallest 12V charger and is suitable for charging batteries installed in motocycles, jet skis, ATVs and lawnmowers upto 100Ah. It doesn't produced sparks and is protected against reverse polarity and short circuits. ● Amps Output 1:  0.8A max ● Loading phases: 6 charging phases. ● Charging current: 0.8A ● Dimensions: 142 x 51 x 36 mm ● Weight: 0.5 Kg ● Protection: IP65... read+

● The MXS 0.8 is an advanced patented Floating/Pulse maintenance mircroprocessor controlled battery charger for batteries from 1.2 Ah to 85 Ah. ● MXS 3.8 features include battery health diagnostics to determine if it can receive and retain charge, a ptented automatic desulphation program. ● Amps output 1: 3.8 A max. ● Loading phases: 7 stages. ● Charging current: 3,8 amps max ● Dimensions: 168... read+

● The D250SE is a fully automatic five-stage charger that supplies up to 20A of power to 12V lead or lithium service batteries from 40 to 300Ah. ● 20A fully automatic temperature-compensated charging for batteries from 40Ah to 300Ah while running. ● Two inputs (solar and alternator in parallel). ● Smart alternator compatible. ● Selectable lead-lithium mode. ● Solar panel regulator with maximum... read+

● The MXS 7.0 has a power mode that allows the vehicle's battery to be disconnected without having to lose the settings of the electronic systems. ● Battery diagnosis function, which determines if the battery is capable of receiving and holding charge. ● Special reconditioning function, which can restore deep discharge and stratified batteries. ● Exclusive maintenance charge function, which is... read+

● CS Free is the first portable battery charger with Adaptive Boost technologiy, campable of charging and maintaining any 12V lead or lithium battery anywhere, without the need for a power outlet. ● CS Freee automatically analyzes the battery status and adjusts the voltage level. ● Amps Output: 20A ● Charging current: 20A max. ● Dimensions: 248 x 98 x 78 mm. ● Weight: 1,40 Kg ● Protection: IP5... read+

● Stay in control and plan your day, accurately predicting the remaining charge time. ● Maximize battery performance: Easy to use and fully automatic. The technology monitors the battery and takes the necesary measures to take care of your specific battery. ● Full control of charging time: A series of LED lights indicate the different charging stages and the time it will take to sufficiently ch... read+

● MXS 5.0 test&charge combines an advanced microprocessor controlled battery charger with an alternator and battery chech function to provide the ultimate solution for testing, charging and maintaining batteries. ● Offers excellent performance with batteries from 1.2Ah to 110Ah. This charger solves a wide range of battery problems. ● Include a patented automatic desulphation stage and a spe... read+

● Suitable for all 12V battery types: common liquid, calcium (Ca/Ca) and gel, AGM, EFB and lithium ferrophosphate (LiFePO4) batteries. ● Dedicated lithium ferrophosphate (LiFeP04) mode ● Compatible with batteries from 40 Ah to 500 Ah (40 Ah to 50 Ah LiFePO4). ● Power mode to assist the battery during diagnosis or troubleshooting. ● Fully automatic and easy to use. Easy to connect, non-sparking ... read+

● It has a variety of functions. For example, an automatic diagnostic function that test whether a battery can take and hold a charge. ● The MXS 10EC is easily portable and comes with 4 meter extension charging cables and a protective silicone shock absorber for maximum comfort and versability. ● The MSX 10EC ships with an ooptional temperature sensor that helps compensate for weather condition... read+

● TIt has advanced technology with three fully automatic charging and maintenance programs: Normal, AGM and regeneration. ● It can be connnected directly to the battery indefinitely, if required, without causing excess or undercharging. ● Amps Outputs: 2,3A. ● Loading Phases: Fully automatic multi-stage charging cycle. ● Charging current: 2.3A max ● Protection: IP65 ● Departures: 1 ● Serie: Po... read+

● Microprocessor controlled charger specially designed to recharge and maintain lithium ion phosphate (LiFePO4) batteries. Maximum current available for 4A charging. It can charge iFePO4 batteries from 5Ah to 60Ah and hold batteries up to 120Ah. ● Output voltage: 12 VDC ● Input voltage: 230 VAC ● Seroe: XS ● Departures: 1 ● Protection: IP65 ● Dimensions: 168 x 65 x40 mm ● Charging current: 5A ... read+

● ChargeMaster 24 VDC 30 amp and 3 out charger. ● Potential-free contact that can be used to control certain elements. ● Any MasterBus product can be configured to operate on this contact. ● NO-C-NC potential-free contact- 1A/30 VDC ● Amps Output 1-2-3: 30A ● Loading phases: Bulk, absorption and flotation. ● Charging current: 30A ● Dimensions: 291 x 210 x 131 mm ● Protection: IP23. ● Departure... read+

● The XT 14000 is a professional 24V charger specifically developed to charge and maintain 24V vehicle and machinery batteries. ● Fully automatic charging in 7 phases ● Automatic battery diagnosis. ● IP44 rating, making it suitable for outdoor use. ● Temperature sensor to compensate for environmental conditions. ● Safe operation, doesn't produce sparks. ●&nbs... read+

● Charger 5.0 EU promotion pack which includes CTEK MXS 5.0 charger, USB rechargeable portable battery and battery status indicator. ● The MXS 5.0 is an advanced microprocessor controlled battery charger that provides unmatched performance in lead acis batteries from 1.2Ah to 110 Ah. ● It incorporates an automatic temperature compensation system to guarantee the best charging performance, even ... read+

● Highly portable, the MXTS 40 includes 2.5 meter wall and battery cables and removable clips. ● Dual voltage: 40A/12V and 20A/24V ● Fast charging in several phases, electronically safe ● Constant power supply for the battery with selectable voltage. ● Temperature compensation to obtain a more efficient charge. ● Diagnostic function that indentifies if the battery... read+

● Professional battery charger, 8 stages CTEK 24V. ● Supplied with clamps and temperature sensor on the cable. ● Features such as battery diagnostics, which shows whether a battery can receive and hol a charge.. ● Function a special reconditioning feature that restores stratified and extremely discharged batteries. ● A dedicated maintenance charge and a temperature sen... read+

● It offers different indicators that show the status of the carge, charging voltage and current, charging time and power indication to monitor battery conditions. ● Selectable modes for optimal adaptation to battery size. ● Selectable power supply program with constant output voltage of 13.6V (max. 70A) or 27.2V (max 35A) ● Patented desulfation function. ● Reconditioning function to restore s... read+

● Professional battery charger, 8 stages, 24V and 4A. ● It doesn't produce sparks and is protected against reverse polarity and short circuits. ● Offers features such as battery diagnostics which shows whether a battery can receive and hold a charge, a special reconditioning feature that restores stratified and extremely discharged batteries. ● It has dedicated maintenance charge a mode to opt... read+