Electric Bilge Pumps

● Specially designed for pumping waste water, fitted with large single diaphragm, valves without waists, silent operation, no filter required; self-priming up to 3 metres; can run dry and pump air and water mixes, easy to install on confine spaces, fitted with double output valve, which ensures a continuous flow; adjustable inlets at 360°, low energy consumption. ● Consumption: 2.4 / ... read+

MOST LIGHTWEIGHT, high-performance, ELECTRIC IMPELLER PUMPS ARE IDEAL FOR PUMPING WATER FROM AN EXTERNAL CONTAINER OR ONBOARD WATER TANK.  Operates with a microswitched tap, pressure switch or with a separate switch  Suitable for use with both pressure switch and microswitch systems  Simple, compact and economical solution  Higher flow rates, long life, very quiet with low power consumption... read+

Ref.: Voltage Consumption Capacity Hose connector Use 1692140 12 V 3 A 11 l/min Double 10/13 mm In line 1692141 24 V 1.6 A 11 l/min Double 10/13 mm In line   read+

● Motor: 12 V ● Capacity: 3786 litres per hour ● Draw: 4 Amperes ● Fuse: 6 Amperes ● Hose diameter: 29 and 19 mm ● Dimensions (L x W x H): 107 x 88 x 165 mm ● Delivery head: 2.4 m read+

● Motor: 12 V ● Capacity: 2500 gph (9462 litres per hour) ● Draw: 18 Amperes ● Fuse: 27 Amperes ● Delivery head: 4 m ● Hose diameter: 32 and 29 mm ● Dimensions (L x W x H): 157 x 132 x 239.2 mm read+

• Robust ABS construction for heavy duty use on recreational or commercial boats. • Parabolic chamber keeps the engine insulated and cool, reduces fuel consumption. Stainless steel transmission. • Easy to install: support arm with click-in insert. • Easy maintenance: removable for cleaning • Supplied with 90 cm cable • Voltage: 24 V • Flow rate at level: 6840 ... read+

● It has an efficient water-cooled engine has higher torque and lower power consumption, a housing shock resistant resin, detergents, fuels and corrosive, a propeller and a quick release bracket. ● Height: 111.12 mm ● Hose: 19 mm ● Volts 12 ● Amperes: 3 ● flow: 2.839 l / h read+

● Impressive pumping capacity for its size and cost. Equipped with stainless steel shaft, watertight motor and Teflon gland. ● Provides capacity of 51 liters per minute at zero discharge. ● 19mm discharge outlet. ● These pumps do not require fully automatic float switches. Its computerized operation will cause the pump is turned on for 1 second every 2.5 minutes to detect water. If there is wat... read+

●  This easy-to-clean salted water pump has a water cooled engine and complies with ISO8849 ●  Cables tinned in a sealed construction ●  12 V ●  Power consumption: 2.5 A ●  Fuses: 5A ●  Flow: 1890 l / h ●  Ports: 3/4 "(19 mm) read+

● Ideal for shrinking water in small areas such as small boats, pneumatic, PVCs, etc ... ● Made of white plastic ABS easy to clean ● Dimensions (WxHxD): 7.6 x 10 cm ● 12 V ● Consumption: 1.5 A ● Fuses: 3A ● Flow: 1700 l / h ● Ports: 3/4 "(19 mm) read+

● Removable housing for easy cleaning. Totally submersible. Protection against air bubbles. Protected ignition. Marine grade wiring. ● Meets ABYC and USCG requirements ● 12 V ● Consumption: 2 A ● Fuses: 5A ● Flow: 2270 l / h ● Ports: 3/4 "(19 mm) read+

The 12V submersible bilge pumps are made of shock resistant ABS plastic and powered by the world’s best compact motor. The snap-on strainer base makes installation a simple procedure. These reliable pumps are available in four sizes from 500GPH to 1000GPH. read+

● All-in-one pump and float switch. ● No additional float switch is required. ● The pump turns on when the water level rises and shuts off when water is withdrawn. ● Specifications: Flow rate: 600 gallons per hour (2727 liters per hour) Voltage: 12V Max Draw: 2.5 A Fuse Amps: 4.0 A Weight: 570 gr Wire Lead: 1 m read+

● SEAFLO non-automatic bilge pumps offer water evacuation activated by a panel or float switch. Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you’ll have no problem changing to us from them. Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Di... read+

● All-in-one pump and float switch. ● No additional float switch is required. ● The pump turns on when the water level rises and shuts off when water is withdrawn. ● Specifications: Flow rate: 750 GPH Volts: 24 V Max Draw: 1.5 A Head: 3.0 m Wire lead: 1 m Outlet Diameter: 19 mm / 3/4" Weight: 520 gr read+

● Seaflo self-priming bilge pumps are positive displacement pumps, capable of operation in either direction. Can be use widely, including drainage bilge water, sewage water and wash down deck. We use robust motors, stainless steel shafts and rugged metal gears. Our tough design provides performance that you can rely on for years. ● Specifications: Voltage: 12V (GPM / LPM): 8.0 / 30.0 Mea... read+

● The Auto-Eye bilge pump series are equipped with a sensor that makes automatic operation easier. ● They are made with a compact, efficient and long-lasting engine ● Durable, impact resistant plastic housing. Quick release filter for easy cleaning. ● Features: Motor: 12V Capacity: 500 GPH (1890 LPH) Amp Draw: 1.6A Fuse Size: 2.5A Hose Diameter: 19mm (3/4") Measurements:... read+

● The Auto-Eye bilge pump series are equipped with a sensor that makes automatic operation easier.● They are made with a compact, efficient and long-lasting engine● Durable, impact resistant plastic housing. Quick release filter for easy cleaning.● Features: Motor: 12V/24V Capacity: 1000 GPH (3786 LPH) Amp Draw: 4.5 A (12V)/ 2.5 A (24V) Fuse Size: 6 A (12V) / 4 A (24V) Hose Diameter: 29mm (1-1/... read+

● The Auto-Eye bilge pump series are equipped with a sensor that makes automatic operation easier. ● They are made with a compact, efficient and long-lasting engine ● Durable, impact resistant plastic housing. Quick release filter for easy cleaning. ● Features: Motor: 12V Capacity: 1500 GPH (5676 LPH) Amp Draw: 9 A Fuse Size: 12 A Hose Diameter: ... read+