By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Clipper Wind NMEA Output cable.
Clipper Wind NMEA Output cable (5 metre for MK1 five wire masthead systems).
NASA wind vane kit
Spare wind vane assembly with fixings and illustrated fitting instructions For Clipper, Target, Cruiser and Wireless, Tactical masthead units IMPORTANT – Select correct type for your model: Clipper / Target / Cruiser Version 1 – five wire mast unit Clipper / Target / Cruiser Version 2 – three wire / Wireless / Tactical mast unit
Nasa Clipper Wireless Wind True
● The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. ...
10%
B&G Wind Sensor Speed Bearing
B&G Wind Speed Sensor Bearing. Replacement wind speed bearing for WS300, WS310, WS320, WS700, 608, 508, 213, and 496 series wind sensors.
NASA Tactical Wind Mast Sensor
Tactical wind mast sensor (Two options, with 20m cable or without cable), In demanding conditions, where high performance is essential, the Clipper Tactical wind mast sensor is the ideal choice. With ten updates every second, it responds very quickly to the changes in wind speed and direction, which occur during tricky maneuvers. The sensor can supplied alone or with a complete mast mounti...
10%
WS310 Wired interface
Connects a WS310 wind sensor to a NMEA 2000 network. • IEC/EN 60945 compliance • Connectivity • NMEA 0183 compatible MWV,R phrases • NMEA 0183 1 x NMEA 0183 Rx, Baud rate 38400 • NMEA 2000 1 x Micro-C port, 1 LEN • Electrical • Supply voltage 12 V DC (9 - 16 V DC) • Waterproof rating IPX7 • MFD Compass safe dis...
NASA 20 Metre Wind V2 Extension cable
20 metre 3 wire extension cable to suit the Clipper, Target and Cruiser V2 Wind mast head units. Fitted with 3 way wire trap terminal block.
NASA Target Wireless Wind (Apparent)
The Target wireless wind is supplied with a wireless masthead transmitter, a base unit and a Target Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masth...
13%
B&G Sail Performance Sensor Pack
An all in one core data components kit, that includes all you need for your boat network. This pack includes a WS320 wireless wind pack for highly accurate wind information, which is easy to install. The IDST810 depth, speed and temperature sensor and a GPS ZG100 Module pack for all your positioning data, including heading, heel and trim. This pack also includes the Micro-C backbone kit, 2m and...
NASA Original Equipment 20 Metre Wind MHU cable V2
Replacement 20 metre mast cable for the Clipper, Target and Cruiser V2 three wire wind systems.
10%
B&G 608 Wind Sensor Spare PCB
Spare printed circuit board (PCB) for the B&G 608 series wind sensor. This internal electronic component is compatible with B&G 608 and 508 wind sensors, enabling the restoration of accurate wind speed and direction measurements. Designed to ensure operational continuity and data reliability in demanding marine conditions. Installation involves direct replacement of the sensor's interna...
10%
B&G WS320 Wireless Interface for Wind Sensors
The Simrad WS320 Wireless Interface allows wind sensors to connect to the NMEA 2000 network. Equipped with Bluetooth 4.0 technology, this unit facilitates wireless wind data transmission. The communication range is suitable for mast heights of up to 25 meters (80 feet). Official Simrad product. Technical details Bluetooth 4.0 communication technology for reliable data transmission Communicatio...
10%
WS310 Connection Cable - 20m
Original Simrad WS300/700 wired connection cable, 20m (65') length. Specifically designed for the WS310 series, this accessory ensures stable and reliable data transmission for navigation component integration. Ensures compatibility and optimal performance of your Simrad navigation equipment. Technical details Original Simrad WS300/700 wired connection cable, 20m (65') length Specifically desi...
10%
Wired Cable for WS300/700 - 35m (115')
Wired cable designed specifically for the WS310 wind system, featuring a 35-meter length that facilitates installation on larger vessels. It allows reliable and stable data transmission between sensors and the chartplotter, ensuring accurate readings of wind speed and angle. It integrates seamlessly with the B&G WS300/700 range for a complete navigation experience. Technical details Length...
10%
WS300/700 50m Cable for WS310 Systems
Wired connection cable specifically designed for the WS310 instrument system, featuring a 50-meter length that allows for flexible installation on larger vessels. This accessory ensures stable and reliable data transmission between sensors and the chartplotter, guaranteeing the integrity of real-time navigation information. Technical details Lengths available from 20 to 80 meters to suit vario...
10%
Wired Cable for B&G WS300/700 (20-80m)
Wired cable designed for the B&G WS300/700 chartplotter system. Available in 20, 30, 50, and 80-meter lengths, this cable enables data transmission and power supply for wind sensors and other compatible devices. It ensures a stable and reliable connection in demanding marine environments, guaranteeing signal integrity for precise navigation. Technical details Wired cable for B&G WS300/...
10%
B&G Triton² Navigation Pack with Wireless Wind Sensor
The Triton² pack includes two 4.1-inch color display chartplotter from B&G, designed for an intuitive interface and compact design. The system integrates a WS320 wireless wind sensor that transmits speed and apparent/true wind data without cables. The package also contains the DST810 multifunction transducer and a NMEA2000 starter kit, facilitating easy installation and full integratio...
2.318,90€ Was: 2.576,55€
10%
WS720S Ocean Spec Vertical Wind Sensor 1.1m
The WS720 high-performance wind sensor offers superb aerodynamics and accuracy for performance sailing. A 1.1m high modulus Ocean spec carbon spar elevates the wind sensor into clear air, above any sail-plan disturbance at the masthead. Sailing features for cruising and racing The WS700 series is the ultimate wind sensor for performance sailing, providing the most accurate wind angle and speed ...
3.276,00€ Was: 3.640,00€
10%
WS730S Ocean Spec Vertical Wind Sensor 1.4m
The WS730 high-performance wind sensor offers superb aerodynamics and accuracy. A 1.4m high modulus Ocean spec carbon spar elevates the wind sensor into clear air, above any sail-plan disturbance at the masthead. Sailing features for cruising and racing The WS700 series is the ultimate wind sensor for performance sailing, providing the most accurate wind angle and speed data. Higher altitude fo...
3.864,85€ Was: 4.294,30€
Speed Cups for B&G Wind Sensors
Speed cups for B&G Wind Sensors, including mounting nut. These cups are designed to ensure accurate wind speed measurement in demanding marine conditions. Key benefits The package includes the mounting nut required for a secure and stable installation on the boat's mast or structure. Compatibility extends to models WS310, WS320, and WS700, as well as the VMHU, 608, 508, 213, and 496 series....
B&G BATTERY,WS320 000-15141-001
Simrad BATTERY,WS320 reference 000-15141-001.
10%
Wind Angle Bearing for WS300/700 Series Wind Sensors
Original replacement part designed for the WS300 and WS700 series wind sensors, ensuring accurate transmission of wind angle data. This component is essential for maintaining reliable navigation readings and sail optimization. Please note that this replacement is not compatible with legacy wind sensor generations. Technical details Original replacement part for WS300 and WS700 wind sensors Ens...
94,90€ Was: 105,45€
B&G SUPPORT MOULDING INC O-RING,WS300/700 000-15143-001
Replacement O-Ring for Simrad WS300 and WS700 chartplotters. Designed to ensure a durable, watertight seal, this component is essential for maintaining equipment integrity and protecting it from moisture and dust. Official compatible part for the specified models.
10%
WS300/700 Series Wind Vane Assembly
This wind vane assembly is an original spare part specifically designed for the WS300 and WS700 series wind sensors by B&G. The package includes the complete vane mechanism, ensuring accurate wind direction measurement in demanding marine conditions. Key benefits The unit comes equipped with the necessary mounting nut, facilitating the installation and maintenance of the navigation system. ...
