Garmin

  Compatible Devices: ♦ Montana 600 ♦ Montana 650 ♦ Montana 650t   Read more »

    Unit dimensions, WxHxL: 31/32" x 43/64" x 3 3/32" (24.7 x 17.0 x 78.6 mm)   Total cable length: 16 ft. (4.9 m)   Temperature range: From 5°F to 158°F (from -15°C to 70°C)   Compass Safe Distance: 2 in. (5 cm)   Power Input Source: 9–16 Vdc from the NMEA 2000 bus   NMEA 2000 Power Usage: 1.1 W max   NMEA 2000 Load Equivalency Number (LEN): 2 (100 mA) ... Read more »

● Our bronze thru-hull mount transducer offers good performance at high speeds. ● An excellent selection of fiberglass and wood hulls, this 600W 8-pin narrow bore transducer has a depth of 800m to 1,200ft, an operating frequency of 50 to 200kHz, a beam of 45 to 12 degrees and a strut angle between 0 and 7 degrees. ● The transducer kit is supplied with installation instructions. ... Read more »

● Transducer 1 kW 8 pines mid-range narrow beam transducer is ideal for deep water and bottom definition. Main Features: ● Deep: 1500 to 2200 ft ● Operating frequency: 50 to 200 kHz ● Beam: 14 x 23 to 3 x 5º ● Stanchion angle of between 0 and 26º degrees   Read more »

● Transducer 1 kW 8 pines mid-range narrow beam transducer is ideal for deep water and bottom definition. Main Features: ● Deep: 1800 to 2500 ft ● Operating frequency: 50 to 200 kHz ● Beam: 19º / 6º ● Stanchion angle of between 0 and 20º degrees Read more »

Compatible Devices:  GSD 24     Read more »

  With Garmin’s NMEA 2000 Engine Tilt/Trim Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000 signal so you can create or expand your network without replacing all of the equipment on your boat.... Read more »

  With Garmin’s NMEA 2000 Fluid Level Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000 signal so you can create or expand your network without replacing all of the equipment on your boat. &nbs... Read more »

  With Garmin’s NMEA 2000® Trim Tab Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000 signal so you can create or expand your network without replacing all of the equipment on your boat.  ... Read more »

This plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units.   The 500 W 8-pin transducer has a maximum depth of 1,500 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 40 to 10 degrees; and mounts on a 0 to 70 degree transom.   Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging ... Read more »

● Our plastic transom mount provides depth, speed and temperature in 1 package.   ● This 8-pin 500 W triducer has a maximum depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and mounts on a 3 to 20 degree transom.   ● Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. &nb... Read more »