By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Base Support for Gas Springs 8 mm Threaded PIn
The curved shock absorber bracket is made of stainless steel and has an external threaded bolt of 8 mm diameter. Reference 38.013.01 Model Standard Threaded bolt 8 mm
Measurements Reference A B C Model Features 38.013.01 30 mm 50 mm 30 mm Standard External threaded bolt of 8 mm 38.013.23 25 mm 35 mm 25 mm Compact
The table lists dimensions A, B and C for each refere...
Painted Steel Gas Springs Eye-Eye
Gas strut with a rod made of steel and a body with an epoxy powder coating. Resists the marine environment.
Reference
Open
Stroke
Force
Ø Body
Ø Rod
M3504200
200 mm
60 mm
4 kg
19 mm
8 mm
M3509200
200 mm
60 mm
9 kg
19 mm
8 mm
38.004.00
244 mm
88 mm
5 kg
15 mm
6 mm
38.005.00
244 mm
88 mm
9 kg
15 mm
6 mm
38.006.00
244 mm
88 mm
18 kg
15 mm
6 mm
38.007.00
300 mm
112 mm
12 kg
15 mm
6 m...
Stainless Steel Gas Springs Eye-Eye Alrose
Shock absorber fitted with stainless steel terminals with 8 mm holes. It incorporates a valve to release the air, designed to vary the reaction of the load. Measurements and strength
Reference
Open mm
Stroke mm
Strength kg
Body Ø mm
Rod Ø mm
From
To
3802000
250
90
9
30
15
6
3802003
355
130
10
40
18
8
3802007
500
200
10
50
18
8
3802009
600
255
10
50
18
8
3802011
730
315
20
70
23
...
Painted Steel Gas Springs Eye-Ball
Painted steel eye-ball gas spring with a chrome-plated steel rod and an epoxy powder-coated body. Resistant to the marine environment. Reference Open mm Stroke mm Force kg Body Ø mm Rod Ø mm Ball Ø mm 38.114.01 550 229 20 19 8 10 38.118.99 550 229 38 19 8 10 38.117.26 600 255 36 19 8 10 38.115.00 355 130 18 19 8 10 How to choose a gas spring ----->
Stainless Steel Gas Springs Eye-Eye 8mm
Gas strut made of stainless steel, with 8 mm holes at the ends and eye-to-eye mounting. The table lists the various references available with their open length, stroke, resistance and body and rod diameters. References and measurements
Reference
Open
Stroke
Resistance
Ø Body
Ø Rod
38.009.00
250 mm
90 mm
5 kg
15 mm
6 mm
38.009.01
250 mm
90 mm
10 kg
15 mm
6 mm
38.009.03
250 mm
90 mm
18 ...
Stainless Steel Gas Spring with Ball Head
Gas strut manufactured in stainless steel with composite ball ends. The table lists the dimensions and strength of each available reference. Dimensions and performance by reference Reference Open Closed Stroke Strength Body Ø Rod Ø Ø Ball required 38.020.31 254 mm 178 mm 76 mm 9 kg 15 mm 6 mm 10 mm 38.020.32 254 mm 178 mm 76 mm 14 kg 15 mm 6 mm 10 mm 38.020.35 305 mm 216 mm 89 mm 20 k...
Steel ball 10mm for Snap Mounting of Gas Springs
Stainless steel ball 10 mm in diameter for mounting gas dampers. Ball diameter: 10 mm
Fork Base for Eye Springs
Bracket available in two diameters: 6 mm (ref. 38.013.66) and 8 mm (ref. 38.013.68).
Fastening Plates Flat Version with Threaded Pin
Flat plate made of stainless steel, with 8 mm threaded pin, available in different sizes and versions depending on the reference.
Ref.: A B Version 3801300 60 mm 50 mm 8 mm threaded pin 3801320 45 mm 35 mm 8 mm threaded pin 3801299 60 mm 50 mm 8 mm threaded pin; length 23 mm, only for gas shock absorber (3801801; 3801802)
Fastening Plates Flat Version with Ball Pin
Flat plate with 10 mm ball for shock absorber mounting, available in standard and compact versions. The table lists the measurements of each version and its reference. Ref.: A B Version 3801340 60 mm 50 mm Standard 10 mm ball 3801321 45 mm 35 mm Compact 10 mm ball
Fastening Flat Plates 90 Degrees Version with10 mm Ball Pin
Compact angled bracket of 90º for shock absorbers, with external ball of 10 mm. The table lists dimensions A, B and C for this model and for other variants in the same family, with their references and characteristics.
Reference A B C Model Characteristics 38.013.24 25 mm 35 mm 25 mm Compact External ball of 10 mm 38.013.41 30 mm 50 mm 30 mm Standard 38.013.42 30 mm 50 mm 30 mm ...
Fastening Flat Plates 90 Degrees Version with Threaded Pin
This is an angled bracket of 90º for shock absorbers, with an internal threaded bolt of 8 mm. The table lists the reference and the model's dimensions. Reference A B C V Features 38.013.02 30 mm 50 mm 30 mm standard Internal threaded bolt of 8 mm
Reference 38.013.02: A 30 mm · B 50 mm · C 30 mm · V standard · internal threaded bolt of 8 mm.
Fastening Plate Embossed Version
Raised plate or bracket for shock absorbers, available in the version for a Ø 10 mm screw or for a Ø 10 mm ball. Measurements by reference
Reference A mm B mm C mm Version 38.013.10 55 48 10 Ø 10 mm screw 38.013.11 55 48 10 Ø 10 mm ball
Fastening Plates Angle Version
Angled plate for the shock absorber mount, available in four variants depending on the mounting side and the type of fitting: version with 8 mm screw or with Ø 10 mm ball.
Reference Type Version 38.013.16 left 8 mm screw 38.013.17 right 8 mm screw 38.013.18 left Ø 10 mm ball 38.013.19 right Ø 10 mm ball
Mini Gas Spring
The mini gas strut is made from stainless steel and has an open length of 144 mm, a thrust of 5 kg and a stroke of 38 mm. How to choose a shock absorber:
Support Cushion triangular with central screw
Triangular shock absorber mount with central screw of 8 mm.
Support Cushion Base with pin
Damper base with 8 mm pin, from the Osculati brand, reference 38.013.28.
Pin Base for Eye Springs
Mount for base shock absorbers with pin, manufactured in stainless steel.
Stainless Steel Adjustable Gas Springs Eye-Eye 8mm
Adjustable gas strut with a vent valve that allows the spring's thrust force to be adjusted according to the weight of the hatch, to achieve a high and perfectly adjusted force pattern. Adjustment is only possible when the rod is fully extended. It has two 8 mm diameter eyelets made of stainless steel and includes a key for the vent valve. Measurements and references
Reference Open mm Stroke m...
Uflex Black Painted Gas Spring
Uflex offers these gas springs in different pressures to meet the needs of each installation. The rods are made of nitrogen-protected steel and the cylinders are painted black, resistant to marine corrosion. Models and dimensions
Model Length Total (mm) Length Spring (mm) Force output (kg) Diameter Fitting Side A Fitting Side B U95-5 257 95 5 8 1 2 U95-10 257 95 10 8 1 2 U95-20 257 95 20 8 1 2 ...
Uflex Flat Shock Absorber Holder Si 20
Support manufactured in polished stainless steel, for mounting the flat shock absorber with Si clip 20.
90-Degree External Plate with 8-mm Ball for Shock Absorber Brackets
Curved shock absorber bracket with external 8-mm threaded pin, 23 mm long, for 38.018.01/02. Reference A B C Model Features 38.013.03 30 mm 50 mm 30 mm Standard External 8-mm threaded pin, 23 mm long
Extension for Safety Kit
Extension for shock absorber that automatically locks the spring at its maximum extension and releases it with a single movement. This safety device prevents the hatches from closing accidentally in the event of rolling or pitching. The body is made of stainless steel AISI316.
Fitting notes
1) Adding this lock increases the stated length of the spring by 25 mm.
2) For fitting in pairs, order ...




























