By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Rocket Kit and Safety Zones 5 and 6 - 4 Seats
Safety and pyrotechnics kit for 4 persons, designed for vessels navigating in zones 5 and 6. Brings together in a single waterproof bag the safety and signalling material detailed below. Kit contents 4 Lalizas 100N Over-the-head Lifejackets 4 Topomarine Plastimo automatic flash lights Waterproof Marine Safety Equipment Bag 4 Persons Kit of 3 Red Flares Flexible Bailer Maritime Signals Table Pl...
Security Kit Areas 5 and 6 - 6 People
Safety and pyrotechnics kit for vessels operating in zones 5 and 6, made up for 6 persons. Includes lifejackets with their lights, means of signalling and the bailer and audible warning items set out in the contents. Contents
6 Lalizas 100N Over-the-head Lifejackets 6 Topomarine Plastimo automatic flash lights Waterproof Marine Safety Equipment Bag 6 Persons Kit of 3 Red Handflares Flexible Ba...
Rocket and Security Kit Zone 3 and 4 - 6 Seats
The kit brings together the safety and pyrotechnic equipment for 6 persons in vessels of Zones 2 and 3. It includes six lifejackets, six automatic lights, two waterproof safety equipment bags, the pyrotechnic kit for zones 3 and 4, a Solas LED waterproof and floating torch, static-cling maritime signal stickers, a plastic fog horn, a 30x45 cm Spanish flag and an approved first-aid kit for zones...
Spain Flag with Crown 60 x 40 cm
Flag of Spain with crown of 60 x 40 cm, made from top-quality polyester and resistant to marine environments. Dimensions: 60 x 40 cm Made from top-quality polyester Resistant to marine environments
Spain Flag with Crown 100 x 70 cm
Spanish flag with crown of 100 x 70 cm, made from top-quality polyester and resistant to marine environments. Dimensions: 100 x 70 cm Made from top-quality polyester Resistant to marine environments
CONECTOR MECHERO MARINO HEMBRA 12V
Female power socket connector with cigarette lighter system, designed to power equipment that runs on this type of connection, such as torches or mobile phones. It is fitted with a watertight cap to prevent water ingress and a system that keeps the plug in place. For use in 12V only, available in black.
Swivel Anchor Chain Inox for 6-8mm
♦ To join anchor and chain by facilitating the passage of the anchor for the tip. With its use avoids the traditional bond between anchor shackle and chain, a source of many problems and snags when passing by the tip of the bow. ♦ Model swivel prevents twisting of the chain during anchoring. Chain of 6-8 mm, ♦ 95 mm length.
Chain-Anchor Swivel for 10-12mm Inox
INOXIDABLE GIRATORIA PARA CADENA DE 10-12 mm. Ø
AISI 316 Hand rails with bases
Handrail consisting of a stainless steel tube of 22 mm diameter and 57 mm diameter plates for bolting.
VENTOSA FIJACIÓN BIMINI
Suction cup for securing biminis with a bearing-type bracket. It adheres to the inflatable so that you can secure your canopy to a surface where drilling is not possible. Two suction cups per bimini are required and it is necessary for mounting on semi-rigid or inflatable boats.
DEPÓSITO DE COMBUSTIBLE EN PLASTICO CON VERTEDOR 5L.
CAPACIDAD 5 Litros PLÁSTICO CON MANGUERA SURTIDORA MEDIDAS, - ALTO: 26,0 cm. - ANCHO: 26,5 cm. - PROFUNDO: 14,5 cm.
Imnasa Hammar lifejacket inflator M1-A1
The Hammar M1-A1 hydrostatic firing system uses a unique hydrostatic valve that protects the sensitive element from water. As a result, it is not activated by rain, dew, splashing or damp, and it reduces the risk of inflation. The gas cylinder is located inside the lifejacket and is protected against corrosion. It does not require servicing for 5 years.
Fender Step Heavy Duty
White step fender, 400 mm wide, 400 mm high and 205 mm thick.
Colour White Dimensions 400 mm wide × 400 mm high × 205 mm thick
AMORTIGUADOR DE AMARRE INOX 6mm
Stainless steel shock absorber for mooring. Its technical data are: Diameter: 6 mm Length: 320 mm Maximum load: 3.300 Kg
Boat length: 8 metres.
AMORTIGUADOR DE AMARRE INOX 5mm
Stainless steel shock absorber for mooring, with a diameter of 5 mm. Diameter 5 mm Length 270 mm Maximum load 1.600 Kg Boat length 6 metres
AMORTIGUADOR DE AMARRE INOX 8mm
Mooring shock absorber made of stainless steel, with a diameter of 8 mm and a length of 330 mm. It withstands a load of 346 Kg. Diameter 8 mm Length 330 mm Load 346 Kg
Rubber hose for Diesel and Fuel Ø 10mm
Long-length rubber hose suitable for loading mineral oils, diesel, and unleaded fuel.• TEMPERATURE RANGE: -20˚C +80˚CCompatible with fluids, according to EN 590:2010.CONSTRUCTION• Tube: black, smooth, petroleum products up to 40% aromatic content, resistant NBR rubber.• Reinforcement: high-strength synthetic textile yarn.• Cover: black, abrasion, fuels, oils, and weathering ...
Fuel Line with Primer Bulb 2 Meters
Diameter: 9,5 mm
RUEDA DE TIMÓN ANTIDESLIZANTE INOX
Steering wheel of 400 mm diameter manufactured in non-slip polyurethane, available in black or white-stainless steel.
WIRE STEERING CONE
Diameter: Ø 100 mm Height: 70 mm
D-SHACKLE ZINC PLATED VINOX
Galvanised straight shackle, Recto model, with available diameter from 5 to 25 mm.
GUARDACABOS NYLON
Fairlead manufactured in Nylon.
Amortiguador de Amarre Galvanizado
Mooring shock absorber made of galvanised steel, available in different steel diameters: from 5 to 12 mm.



























