Brand new work positioning device enables quick and accurate adjustment of length for positioning at the work station. Super smooth adjustment even under load.
Reduction of the diameter of the rope from 11 mm to 10 mm improving performance and fluidity of regulation.
New compact and ergonomic terminals with rubber protections, with label and integrated NFC chip to ensure quick and safe identification of the serial number.
Reduction of the overall dimensions of the terminal head through the use of a sleeve which ensures the loads required by the standard but makes the device more compact and expanding its adjustment range.
Main features:
The TRIMMER is a incredibly smooth device for progressive adjustment of the lanyard length.
It is used on the work positioning "D" rings on the harness waistbelt: the length is adjusted by pressing the ergonomic lever.
Can be used from the ventral or lateral attachment points to adjust the distance from the anchoring point.
Fitted with protective sheath to protect the rope from the contact points .
Visible stitchings for a quick visual inspection.
Lightweight and compact.
Available in 5 lengths: 1.3, 2, 3, 4 e 5 m
Other lengths available on request.
It is possible to install any Kong connector.
Available in kit with Tango connector already assembled.
High quality product, completely made in Italy!
Also available Trimmer+ Nude without rope inserted # 80206NO00KK
Technical data
| Code | Variant | Standard | Weight (g) | Length (m) |
|---|
| 289S00130KK | 1.3 m | EN 358, ANSI Z359.3 | 280 | 1.3 |
| 289S00200KK | 2 m | EN 358, ANSI Z359.3 | 340 | 2 |
| 289S00300KK | 3 m | EN 358, ANSI Z359.3 | 420 | 3 |
| 289S00400KK | 4 m | EN 358, ANSI Z359.3 | 500 | 4 |
| 289S00500KK | 5 m | EN 358, ANSI Z359.3 | 580 | 5 |
| 289S01000KK | 10 m | EN 358, ANSI Z359.3 | 980 | 10 |
| 289SETS01KK | 2 + Tango | EN 358, ANSI Z359.3 | 475 | 2 + Tango |
| 289SETS02KK | 3 + Tango | EN 358, ANSI Z359.3 | 555 | 3 + Tango |
| 289SETS03KK | 4 + Tango | EN 358, ANSI Z359.3 | 635 | 4 + Tango |
| 289SETS04KK | 5 + Tango | EN 358, ANSI Z359.3 | 715 | 5 + Tango |
