LALIZAS Mounting Kit for Hydrostatic Release Unit for EPIRB

Construction & Compliance

• Material: made of glass reinforced nylon for extra protection against corrosion
• Design & testing: designed & tested according to LSA requirements / MSC 81(70), as amended
• Compatibility: complies with most EPIRBs & is installed according to the EPIRB Manufacturer’s instructions

Installation & Maintenance

• Easy installation: having easy & simple installation
• No maintenance: requires no maintenance
• Replacement: needs replacement after 2 years from installation, or 4 years after manufacture, whichever occurs first
• Bolt replacement: the bolt (rod) must be replaced together with the HRU
• Mounting kit: to be used only with LALIZAS HRU bolt & nut for EPIRB (74580-LALIZAS Mounting Kit for Hydrostatic Release Unit for EPIRB) – available separately

Installation Instructions

• Step 1: remove the old HRU and the bolt & nut from the EPIRB and dispose of them
• Step 2: mark the expiry date on the new HRU
• Step 3: place the new HRU and the new bolt & nut and fasten

Marking the Expiry Date

The expiry date must be marked on the label of the HRU for EPIRB.

In order to mark the expiry date (month and year) of the unit, use a knife and scrape off the numbers indicating the month and the year, which is two years after installation.

*Due to the existence of many different manufacturers and models of EPIRBs, it is recommended that authorised personnel check and confirm compatibility and proper operation.