Magma

Tray front to leave utensils and food while cooking on the barbecue. It can be stored inside the barbecue when you are not cooking. Quick assembly and disassembly for cleaning and storage. Compatible with gourmet and connoisseur series Available dimensions: 44x19 cm and 28.5x19 cm   Read more »

Hinge L Magma BBQ Read more »

For all Marine Kettle Read more »

Cooking Grill, Marine Kettle Combination Stove & Gas Grill, Party Size 17'' (43cm) Read more »

● Spare grill charcoal barbecue Marine Kettle Original SIze 15'' (38cm) Read more »

 This round rail mounting bracket is made entirely of 18-8 stainless steel and 356 hard anodized aluminum.  The quick-disconnect system allows for quick disassembly leaving no hardware on the rail.  Designed for mounting rectangular or dual-mounted filet tables out over the water. NOTE:   •  Not recommended for use with 12" x 24" rectangular grill •  Not for use with 9" x 12" and certain 9" x... Read more »

Control Valve Regulator w- "Camping Gaz" collar - Type CV270/470 (Type 2 - Low Output) Compatible with the Magma Marine Kettle BBQ and Newport. Read more »

● Also mounts to square or flat rails. Fits horizontal rails up to 2-1/4” (57 mm) high by any depth or vertical rails up to 1-5/8” (41 mm) wide by any depth. Some fasteners required for installation. ● Valid for models: Catalina and single mount tables * for dimensions see PDF   Read more »

Ring Collar for Gas Barbecues Magma Read more »

● This support for round bars, which is removed quickly, is tiltable in all directions and is made entirely of stainless steel 18 - 8 and 356 anodized aluminum to withstand the harshest marine environments. ● It can be mounted at any angle bars and disassembles quickly without tools and without any pieces in the bar. ● Model mount original size Magma BBQ on 38mm round bars in diameter.   Read more »

● Allows setting a barbecue Marine Kettle on the basis of ink type and orient including up to 8 different positions. It is made of polished marine grade stainless steel mirror for a flawless finish and total corrosion resistance. Includes a hole for water drainage. The rod is attached and easily removed from the base without tools. ● Use with any Magma Marine Kettle Grill Read more »

● Allows setting a barbecue Marine Kettle on the basis of ink type and orient including up to 8 different positions. It is made of polished marine grade stainless steel mirror for a flawless finish and total corrosion resistance. Includes a hole for water drainage. The rod is attached and easily removed from the base without tools.   Read more »

● The best way to protect the barbecue The Marine Kettle BBQ cover is specially designed for use in marine environments. Perfectly resists both rain as the sun thanks to its anti-fading fabric ● For Marine Kettle model size Party (Ø 435 mm) ● Available: 6 Colors   Read more »

● Covers for Magma rectangular Grills ● Dimensions: 23x46 cm (9"x18") ● Valid for models: Newport, Chefsmate and Cabo ● Waterproof and fade resistant, breathable fabric resistant acrylic Sunbrella UV and mildew ● Available in 6 colors Read more »

Read more »

Read more »

They are made entirely of bamboo sterilized. They have a flat design that prevents food can rotate about themselves or slide. Furthermore, this allows the skewers absorb water very quickly to prevent burning when cooking. The wide handle provides a comfortable and secure grip. They come in sets of 25 units Read more »

● Fits Magma and Most Portable Kettle Grills ● 100% Polyester Fabric with Thick Padding for Maximum Protection ● Reinforced Stitching and Heavy-Duty Zippers ● Transports and Stores Grill, Mounts, and Grilling Accessories ● Large Main Compartment for Grill ● Additional Storage Pockets for Griddle, Fish and Veggie Grill Tray, Grill Tools, Control Valve/Regulators, and Dis... Read more »

Read more »

Tray front to leave utensils and food while cooking on the barbecue. It can be stored inside the barbecue when you are not cooking. Quick assembly and disassembly for cleaning and storage. Compatible with gourmet and connoisseur series Available dimensions: 44x19 cm and 28.5x19 cm   Read more »

Hinge L Magma BBQ Read more »

For all Marine Kettle Read more »

Cooking Grill, Marine Kettle Combination Stove & Gas Grill, Party Size 17'' (43cm) Read more »

● Spare grill charcoal barbecue Marine Kettle Original SIze 15'' (38cm) Read more »

 This round rail mounting bracket is made entirely of 18-8 stainless steel and 356 hard anodized aluminum.  The quick-disconnect system allows for quick disassembly leaving no hardware on the rail.  Designed for mounting rectangular or dual-mounted filet tables out over the water. NOTE:   •  Not recommended for use with 12" x 24" rectangular grill •  Not for use with 9" x 12" and certain 9" x... Read more »

Control Valve Regulator w- "Camping Gaz" collar - Type CV270/470 (Type 2 - Low Output) Compatible with the Magma Marine Kettle BBQ and Newport. Read more »

● Also mounts to square or flat rails. Fits horizontal rails up to 2-1/4” (57 mm) high by any depth or vertical rails up to 1-5/8” (41 mm) wide by any depth. Some fasteners required for installation. ● Valid for models: Catalina and single mount tables * for dimensions see PDF   Read more »

Ring Collar for Gas Barbecues Magma Read more »

● This support for round bars, which is removed quickly, is tiltable in all directions and is made entirely of stainless steel 18 - 8 and 356 anodized aluminum to withstand the harshest marine environments. ● It can be mounted at any angle bars and disassembles quickly without tools and without any pieces in the bar. ● Model mount original size Magma BBQ on 38mm round bars in diameter.   Read more »

● Allows setting a barbecue Marine Kettle on the basis of ink type and orient including up to 8 different positions. It is made of polished marine grade stainless steel mirror for a flawless finish and total corrosion resistance. Includes a hole for water drainage. The rod is attached and easily removed from the base without tools. ● Use with any Magma Marine Kettle Grill Read more »

● Allows setting a barbecue Marine Kettle on the basis of ink type and orient including up to 8 different positions. It is made of polished marine grade stainless steel mirror for a flawless finish and total corrosion resistance. Includes a hole for water drainage. The rod is attached and easily removed from the base without tools.   Read more »

● The best way to protect the barbecue The Marine Kettle BBQ cover is specially designed for use in marine environments. Perfectly resists both rain as the sun thanks to its anti-fading fabric ● For Marine Kettle model size Party (Ø 435 mm) ● Available: 6 Colors   Read more »

● Covers for Magma rectangular Grills ● Dimensions: 23x46 cm (9"x18") ● Valid for models: Newport, Chefsmate and Cabo ● Waterproof and fade resistant, breathable fabric resistant acrylic Sunbrella UV and mildew ● Available in 6 colors Read more »

Read more »

Read more »

They are made entirely of bamboo sterilized. They have a flat design that prevents food can rotate about themselves or slide. Furthermore, this allows the skewers absorb water very quickly to prevent burning when cooking. The wide handle provides a comfortable and secure grip. They come in sets of 25 units Read more »

● Fits Magma and Most Portable Kettle Grills ● 100% Polyester Fabric with Thick Padding for Maximum Protection ● Reinforced Stitching and Heavy-Duty Zippers ● Transports and Stores Grill, Mounts, and Grilling Accessories ● Large Main Compartment for Grill ● Additional Storage Pockets for Griddle, Fish and Veggie Grill Tray, Grill Tools, Control Valve/Regulators, and Dis... Read more »

Read more »

● This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all angle adjustable locking mount, a push button locking pin and a water drainage hole in the side of the socket.  Some fasteners required for installation. ● Valid for models: Catalina or smaller rectangulars grills (30 cm x 46 cm) *For dimensions see PDF Read more »

● Permanently installed base. Allows setting a rectangular grill or table based ink including type. It is made of polished marine grade stainless steel mirror for a flawless finish and total corrosion resistance. Includes a hole for water drainage. Is attached and easily removed from the base without tools. ● Valid for barbacues: ChefsMate, Newport, Catalina, Monterey and Dual mount tables Read more »

● This 3 piece telescoping professional quality-grilling tool set from Magma is the perfect addition for any griller.  Manufactured using 18-9 Marine Grade Stainless Steel with rubberized soft touch handles for safe and secure handling.  Choose from (3) usable telescoping lengths to keep hands at a safe distance from the grilling surface or collapse to shortest length for space saving storage. ... Read more »

● Covers for Magma rectangular Grills ● Dimensions: 23x30.5 cm (9"x12") ● Valid for models: Trailmate ● Waterproof and fade resistant, breathable fabric resistant acrylic Sunbrella UV and mildew ● Available in 6 colors Read more »

● Pedestal mount with double lock ● Length: 71 cm (28") *for dimensions see pdf Read more »

● Power grip levelock double locking fish rod mount ● Valid for all rectangular gris and Sigle mount tables *for dimensions see pdf Read more »

● This mount combines the versatility of our popular “LeveLock” all-angle quick release, cam-action mount for instantaneous leveling, with our sturdy vertical, out-over-the-water Round Rail Mount. This mount is made entirely of 18-9 stainless steel and 356 anodized aluminum to outlast even the most severe marine environments. Quickly disassembles for stowage without tools, leaving no hardw... Read more »

● Also Extended dual mounts to square or flat rails. Fits horizontal rails up to 2-1/4” (57 mm) high by any depth or  by any depth. Some fasteners required for installation. ● Valid for models: Chefsmate. Firstmate, Newport, Catalina, Monterey and Dual mount tables * for dimensions see PDF   Read more »

● Also Extended dual mounts to square or flat rails. Fits horizontal rails up to 4-1/8” (105 mm) high by any depth or  by any depth. Some fasteners required for installation. ● Valid for models: Chefsmate. Firstmate, Newport, Catalina, Monterey and Dual mount tables * for dimensions see PDF   Read more »

● This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all angle adjustable locking mount, a push button locking pin and a water drainage hole in the side of the socket.  Some fasteners required for installation. ● Valid for models: Rectangulars grills with dual mount   Read more »

● This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all angle adjustable locking mount, a push button locking pin and a flange gasket with the integral flip-up water seal cap.  Some fasteners required for installation.  ● Valid for models: Catalina or smaller grills (12"x18"), or single mount tables * For dimensions see PDF Read more »

● This Dual mount is 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all angle adjustable locking mount, a push button locking pin and a flange gasket with the integral flip-up water seal cap.  Some fasteners required for installation.  ● Valid for models: Dual mount tables   Read more »

● This attractive mirror polished 18-8 stainless steel flush deck socket set features a push button lock pin and includes a flange gasket with integral flip-up water seal cap. Some fasteners required for installation.  ● Valid for models: Catalina or smaller grills (12"x18"), or single mount tables * For dimensions see PDF Read more »

● Two attractive mirror polished 18-8 stainless steel flush deck socket set features a push button lock pin and includes a flange gasket with integral flip-up water seal cap. Some fasteners required for installation.  ● Valid for models: Chefsmate, Newport, Catalina, Monterey and dual mount tables * For dimensions see PDF Read more »

● If your gunnel or mounting surface is a bit to low, bring your grill or single mount table to a more convenient height with one of these single locking socket mount extension.  Available in either 6" (15.2 cm) or 12" (30.5 cm) and constructed of 304 stainless steel tubing for superior corrosion resistance in even the harshest of marine environments.  The locking spring clip mec... Read more »

● If your gunnel or mounting surface is a bit to low, bring your grill or dual mount table to a more convenient height with one of these dual locking socket mount extension.  Available in either 6" (15 cm) or 12" (30.5 cm) and constructed of 304 stainless steel tubing for superior corrosion resistance in even the harshest of marine environments.  The locking spring clip mechanism... Read more »

● The Double Locking Mechanism insures a secure fit for your boat or home application.  The Pedestal locks into the mounting base and the grill locks to the pedestal. The grill is instantly removable from the pedestal with a simple push-button release. The pedestal also is instantly removable from the mounting base with a push-bottom release that allows the pedestal to be unthreaded and removed... Read more »

● Conveniently store and transport your grill and accessories in one of Magma's new luggage quality padded carrying cases.  Designed to store all of your grilling gear in one space saving location. This case is outfitted with a large storage compartment for a grill, pockets for storing a serving shelf, griddle, fish/ veggie tray.   ● Includes an additional side pocket for carrying up to (2) 1l... Read more »

● A cut above similar products, this meat thermometer displays the correct temperature for a variety of meats and poultry. Constructed of 100% 304 Marine grade Stainless Steel with a large easy to view 2” face and red temperature indicator. Set the indicator to a desired temperature and when the needle reaches this point, cooking is complete. You’ll always know when the meat being prepared is p... Read more »