By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Maxwell Control Box Dual Direction PM
● They are used together with the up / down control panel, the AutoAnchor chain counters, the manual remote controls with cable and / or the foot switches activate the motor in the required direction. ● Available in 12V or 24V DC for magnet motors (PM) permanent or serial wound (SW) ● Selenoids protected against ignition ● It is recommended to install in a dry area ● It...
Maxwell Control Box Dual Direction SW
● They are used together with the up / down control panel, the AutoAnchor chain counters, the manual remote controls with cable and / or the foot switches activate the motor in the required direction. ● Available in 12V or 24V DC for magnet motors (PM) permanent or serial wound (SW) ● Selenoids protected against ignition ● It is recommended to install in a dry area ● It...
Maxwell AA570 Wireless Control Panel and Chain Counter
● Instant connection to the AA702 base station (included), no cables required back to windlass
● Easy one-off calibration for multiple station set-ups
● Seamless interface with AA710 hand-held remotes
● Operate 2 windlasses from a single console
● One touch function deploys and retrieves a preset length of rode
● Preset stopping point and docking alarm on retrieval
● Adjustable backlit display ...
Maxwell AA560 Panel Mounted Windlass Controller and Chain Counter
● Windlass monitoring from the hull ● Simple installation with a "connect and use" sensor ● Accurate information about all barbotenes or chain / chain combination ● Flexibility of a 3mm to 50mm slit consisting of a magnet and a sensor ● Easy assembly ● Multiple unit installation options - combined with other Maxwell AA products for a reel toral control ● Fits CD, A...
Maxwell Cable for External Sensor
Maxwell chain and rope/chain sensor cable for AA150/AA560 Ref Longitud (ft) SP4156 21 SP5022 33 SP4157 49 SP4153 65 SP5017 115
Maxwell AA710 Manual Windlass and Wireless Chain Counter Controller
● High-level 2.4GHz ISM band-free transmission security ● Requires two AA batteries ● Water resistant IP67 ● Ergonomic shape with wrist strap connector ● Rubber mold for good support and anti-slip protection ● Console and protective cover ● Shockproof ● Meets the IEEE 802.15.4 standard The equipment includes: 1 hand reomoto control, 1 base station, 1 sensor and 1 magnet. Note: Two base stat...
25%
Maxwell Panel Controller AA150
● Docking alarm ● Console of marine instruments of 60m ● Selection of counter output reading in feet or meters ● Large LCD screen, adjustable and with back light The kit includes: 1 console, 1 sensor and 1 magnet
Maxwell Bowwheel Control for Bow with Chain Counter
● Use for windlasses, davits, maneuver propellers or other marine equipment ● Electrical protection against return electromotive force ● Rubber coated for shock protection and better grip ● Rest support ● Works in parallel with all AutoAnchor TM products, toggle switches, foot switches or other control equipment ● Connects with DC, AC and hydraulic systems ● 4.5 m spiral cable and robust connec...
Maxwell Windlass Control AA320
● Use for windlasses, davits, maneuver propellers or other marine equipment ● Electrical protection against return electromotive force ● Rubber coated for shock protection and better grip ● Rest support ● Works in parallel with all AutoAnchor TM products, toggle switches, foot switches or other control equipment ● Connects with DC, AC and hydraulic systems ● 4...
Maxwell Handheld Remote Control AA342
● 4 Buttons, Double Anchoring
● Control double bow anchor, steering wheel
● Can be used for windlasses, bow thrusters and other marine equipment
● Protected against electromagnetic fields
● Rubber coated for protection against impacts and impacts
● Storage support
● Works in parallel with all AutoAnchor products, such as rocker switches, foot switches and other control devices
● Can be connecte...
Maxwell Double Installation T Connector
Is needed when installing e.g. 2 windlasses with chain counter and the use of a remote control with dual function
14%
Maxwell Gender Adaptor
MAXWELL gender adaptor for joining 2 sensor cables.
Maxwell Tilt Anchor Bearing
Suitable for rope and chain anchor lines using chain up to 13 mm.
Reference Type L B H h C P104330 Size 1 320 mm 92 mm 72 mm 133 mm 44 mm P104331 Size 2 430 mm 160 mm 100 mm 190 mm 66 mm
Maxwell Fixed Anchor Bearing
Fixed anchor bearings Maxwell are suitable for rope and chain anchor lines using chain up to 13 mm.
Measurements by size
Reference Type L B H C P104332 Size 1 205 mm 72 mm 74 mm 44 mm P104333 Size 2 320 mm 86 mm 74 mm 44 mm P104334 Size 3 444 mm 110 mm 110 mm 68 mm
Maxwell Estopor Balanced Height
The straps fasten the chain and release the load to the pinwheel, fix the anchor, release the anchor or prevent an accidental free fall of the anchor while sailing. Ref B (") C (") F (") G (") G1 (") I (") J (") J1 (") K (") L (") M Anchor Chain (mm) P104357 4 1/8 1 9/16 5 15/16 5 1/8 7/16 3 1 3/4 11/32 2 7/16 3 1/2 M8 8 P104359 5 1 7/8 7 3/16 6 1/4 1/2 3 13/16 2 1/2 3 4 15/16 M10 10/...
Maxwell Levered Chain Stopper For 13mm Chain
The straps fasten the chain and release the load to the pinwheel, fix the anchor, release the anchor or prevent an accidental free fall of the anchor while sailing. Ref B (") C (") F (") G (") G1 (") I (") J (") J1 (") K (") L (") M Anchor Chain (mm) P104372 2 7/8 7/8 6 3 5/8 1 3/16 2 7/8 1 1/4 7/16 2 1/8 3 3/4 M10 8 P104373 3 7/16 7/8 7 1/2 5 1/8 1 3/16 3 1/2 1 3/4 7/16 2 5/8 3 3/4 M...
23%
Maxwell Economic Estopor
The straps fasten the chain and release the load to the pinwheel, fix the anchor, release the anchor or prevent an accidental free fall of the anchor while sailing. B (") C (") F (") G (") G1 (") I (") J (") J1 (") K (") L (") M Anchor Chain (mm) 2 3/8 1/4 3 1/8 1 3/4 5/8 3 5/8 - 1 1/2 2 7/8 - M10 8/10
Maxwell Retaining Tensor
● It is used to pull the anchor and stow it firmly inside the anchor bearing or prevent unwanted noise from the anchor in the broom or from the anchor's movement. ● A retrofit kit is necessary to mount the tensioner assembly on the styrofoam structure.
Maxwell Kit Retrofitting Retaining Tensioner
VETUS P104740 Chain stopper / tensioner retrofit set 13mm chain stoppers
Maxwell Up/Down Anchor Switch Toggle Type
♦ Easy to use, panel-mounted Up/Down switches for remote windlass operation from the helm, fly bridge or cockpit. Suitable for use with dual-directional solenoids. ♦ Manufactured from marine-grade materials. ♦ Splash proof ♦ Suitable for 12 and 24 Volt DC use.
Maxwell Extendable Tipping Anchor Toe
The bow roller MAXSET is designed so that MAXSET galvanised and stainless steel anchors, as well as similar versions from competitors, self-launch efficiently during anchor deployment. Once the anchor is fully recovered, the roller ensures that it sits securely and does not rattle while the boat is under way. Suitable for Delta and Claw type anchors up to 16 kg. Measurements
Reference
A
B
C
...
Maxwell Stainless Steel Anchor Maxclaw
The range of stainless steel anchors AISI 316 Maxclaw is based on the tried-and-tested 'North Sea' claw design and is available in 7 sizes for boats from 4 m (12') to 17 m (55'). Sizes and recommended length
Reference Weight Use on boats of approximate length P105060 5 kg 4 to 6 m P105061 7.5 kg 5 to 8 m P105062 10 kg 6 to 9 m P105063 15 kg 8 to 11 m P105064 20...
Maxwell Anchor Bearing Maxset Anchor Bearing Satin Finish
The Maxset bow roller is designed so that stainless steel and galvanised Maxset anchors, as well as similar competitors' versions, self-launch efficiently during anchor deployment. Once the anchor is fully recovered, the roller ensures that it sits firmly and does not vibrate while sailing. Compatibility by reference
Reference
For Maxset anchor
Anchor weight
P105074
P105069/P105000
4...
Maxwell Anchor Bearing Maxset Anchor Bearing Polished Finish
The Maxset bow roller is designed so that stainless steel and galvanised Maxset anchors, as well as similar versions from competitors, self-launch efficiently during anchor deployment. Once the anchor is fully recovered, the roller ensures that it sits firmly and does not vibrate while under way.
Compatibility by reference
Reference
For Maxset anchor
Anchor weight
P105075
P105069/P105...



























