By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Mercury Remote Control in Panel-Gen II - Locking Bar
● The mounting panel control has a chromed handle and carries a 4 ft (1.22 m) compensation wiring harness with the 3-pin Molex connector.
● All installations require an ignition / choke assembly and independent acceleration / change cables to complete the installation.
● The neutral safety switch wires measure 6.5 ft (1.98 m) and have a bullet-type connector at the ends.
● Man-to-water switch c...
336,30€
on request: Mercury Remote Control in Panel-Gen II - Locking Bar
It can be more than 30 daysTAX incl.
Mercury Remote Control Gen II Console
● This control has a trim switch on the port handle and includes the trim wire harness (attached to the switch) with the white connector. ● All installations require and ignition/choke harness and throttle/shift cables to complete the installation. ● Compatible for the next engines: ● All 1993 and later Mercury/Mariner integrally trimmed and Force 40HP and higher outboards using Mercury-style p...
Mercury Outboard Remote Control Box
For Power Trim Motors, 14.8ft harness and built-in warning horn, 14-pin connector. For use with 2006 - 2014 Mercury Optimax and 4-Stroke Outboard Engines. This is a generation 1 control box and requires generation 1 control cables. OEM Part. No. : 881170A13
Mercury Gen II Control Knob
● El control de montaje en panel tiene una manija negra y viene con un cable de recorte de 1,22 m (4 pies) con el conector molex de 4 pines. ● Todas las instalaciones requieren un conjunto de encendido/estrangulador separado y cables T/S para completar la instalación. ● Los cables del interruptor de seguridad de punto muerto miden 1,98 m (6,5ft) y tienen un conector tipo bala en los extremos. ●...
Mercury Mando de Control 14 Pines
● Genuine Mercury control knob with 14 pins. ● Valid for engines without power trim. ● 15 foot (4,58m) wiring harness and bult-in warning horn. ● New soft grip design. ● Gen I throttle/shift cable part number - 897977A_ ● Throttle/shift cables (896143A) for 8/9.9 FourStroke MY2005 and later outboard engines. ● Generation change 4 stroke 8-9.9 engines above&nbs...
Mercury 14-Pin Power Trim Control
• Includes a control mounted power trim switch and a 4.58 m (15 ft) harness with 14-pin Deutsche connector. • Connects directly to the engine models listed below without the need for an adapter harness. Ref: Gen I Throttle/Shift Cable - 897977A. • Throttle/shift cables (896143A) for model year 2005 and later 4-stroke 8/9.9 outboards. • 4-stroke engines above S/N 0R192772 and...
Mercury Side Mount Control 14-Pin
Side mount control with power-trim switch integrated in the handle. • Includes a 15 ft (4.58 m) wiring harness with 14-pin Deutsche-style connector. • Suitable for 25–300 hp outboard engines from 2006 onwards without DTS. • Requires the use of GEN II type control cables.
