Mercury

● Genuine Mercruiser digital trim sensor kit valid for the following engines: ● ALPHA ONE GEN II (1998+) ● BRAVO I, II , III (nº serie 2B417474 and later) Read more »

● Oil pressure sensor original by Mercruiser compatible with the next engines: ● 3.0L (1990-95) ● 4.3L (1993-98) ● 5.0L (1988-01) ● 5.7L (1988-01) ● 7.4L (1991-00) Read more »

● Original Mercruiser spare part valid for the following engines: ● 4.3, 5.7, 6.2, 8.2 MPI  ● 8.1, 496, 520, 540 ● PSI: 0-100 Read more »

● Genuine Mercury replacement. ● The filter separates water from the fuel while removing other impurities. ● Fuel-contaminated water can cause poor engine performance, stalling and fuel system damage. ● 10 micron filtration. ● Compatible with 175-300 hp V6 and V8 four-stroke outboards. ● Replace fuel filter every 100 hours of normal use or at least once per season. Read more »

● Genuine Mercury replacement. ● Removes 99% of water and other impurities from gasoline. ● 10 micron filtration with 95% efficiency. ● Compatible with V6 (3.4L) and V8 (4.6L) four-stroke outboards from 175-300 hp. ● Replace fuel filter every 100 hours of normal use or at least once per season. Read more »

● Meets DEXRON-III requirements. ● Resists heat decomposition and loss of adequate lubricity. ● Designed to withstand the rigorous demands of the marine environment. ● Specifically formulated, tested and recommended for use in outboards, inboards and sport towing transmissions requiring DEXRON-III fluid.   ● 1L plastic bottle. Read more »

● Plastic Flo-Torq reflex plastic composite drive sleeve Read more »

For outboard engines 135-400 hp (1978 and later) 90-115 CT (2014 and later). • For engines over 300hp, use stainless steel propellers only, hub kit sold separately. • For V6 FourStroke (2018 and later) and 40 CT FourStroke 150hp engines, use Flo-Torq SSR hub kit 8M0150151. V8 FourStroke (2018 and later) and 350-400 hp Verado requires Flo-Torq SSR HD hub kit 8M0101601. • Diameter ... Read more »

Original Mercruiser Replacement. • Specific bendix relay for the starter motor, suitable for Mercruiser engines 3.0L (1990-1994), 3.0LX (1990-1995), 350 MAG MPI ALPHA/BRAVO, 4.3L CARB, 4.3L MPI, 4.3LX, 464 MAG MPI, 5.0L, 5.7L, 6.2L, 7.4L, 8.2L. • Suitable for MARINER-MERCURY engines 75-90-115DFI, 125DFI, 135-150-175-200-250-275-300 VERADO, 200-250 (3.0L EFI), 200-225 (DFI), 200-225 (DFI) 3.0L, ... Read more »

Original Mercury Marine Propeller for outboard motors from 40hp Bigfoot/Command Thrust to 125hp • Diameter: 13.75" • Pitch: 15" • Right-hand rotation • 3 high-quality cast aluminum blades • Attractive and durable high-gloss black Phantom finish • Easy maintenance and repair. Read more »

Original Mercury replacement for Mercury 8/9.9hp engines OR042475 and later. • 60ºC thermostat Read more »

Original Mercury replacement for Mercury 8/9.9hp engines OR042475 and later. Read more »

Genuine Mercury spare part, for Mercury outboard engines: • 75-115 HP (1B366823-2B094995) • 150 EFI (1B905505 & Up) Read more »

Mercury V6 and Alpha 27 gasket. Original spare part, valid for V6 engines and Alpha tails. Read more »

Genuine spare part, suitable for Verado V10 engines. Read more »

Aluminium anode. Original spare part, suitable for Verado V10 engines. Read more »

Genuine spare part, fits Verado V10 and 5.7L engines. Read more »

Genuine spare part, suitable for V12 and 7.6L engines. Read more »

Original spare part, suitable for engines from 6hp to 30hp. Read more »

Gen V Verado Gen V engine replacement part. Read more »

Original spare part, suitable for V12 7.6 litre engines. Read more »

Original spare part, valid for Verado V12 and 7.6 litre engines. As per serial no. 3B060047 and above. Read more »

Original spare part, valid for Mercury 15hp and 20hp EFI engines. Read more »

Genuine spare part, fits Mercury 80hp, 100hp and 115hp EFI (1.7L) engines. Read more »

Genuine spare part, fits Mercury 150hp EFI engines. 135, 150 HP (PROXS, SEAPRO). Original reference: 57-8M0031641. Read more »

Original spare part, valid for Mercury 40/50/60 EFI Command Thrust engines. Read more »

Original spare part, valid for Mercury V6 3.4L/V8 4.6L engines. Read more »

Original spare part, valid for Mercury V8 4.6L (AMS) Verado and SeaPro engines. Includes: • Oil filter - 8M0123025 • Fuel filter - 8M0106635 • 2 Oil Drain Gaskets - 8M0204693 • 8 Spark Plugs LKAR7C-9 • Thermostat - 8M0162139 • Alternator Belt - 8M0218433 • Water Pump Repair Kit - 8M0205803 • Anode Kit Read more »

Original spare part, valid for Mercury V12 7.6L engines.   Includes: • Oil Filter - 8M0168366 ​• Fuel filter - 8M0166596 ​• 2 oil drain seals - 8M0204693 Read more »

Genuine Mercury spare part. Replacement filter: 802893T Read more »

Original Mercury spare part. Fits Mercruiser 5.0L to 383 MPI GM engines. Read more »

Genuine Mercury-Mercruiser replacement part. Fits the following MerCruiser Alpha / Bravo engine models: • MerCruiser Bravo V8, 5.0L, 5.7L, 6.2L and 496 AND 8.2L big block engines. • 520 y 540 • 5.7L MPI TOWSPORT WITH GEN III - 1A091881 and higher • 5.7L SKI EC - 1A090000 and higher • 8.1L TOWSPORT (Base) - 1A380074 and Above • SCORPION 350 EC - 0W698433 and above •... Read more »

Mercury-Mercruiser original spare part ref. 78458A1. Read more »

Original spare part Mercury-Mercruiser ref. 30-803099T1. Valid for Alpha One II transom tails according to serial number: • 1998 and above (0L100040 and above). • 1996-1997 (0F680000 to 0K99999999) • 1991-1995 (0D469859 to 0F679999) Read more »

Genuine spare part Mercury-Mercruiser ref. 16755T1. Valid for Bravo I, II transmissions. Read more »

Integrate Garmin® and Raymarine® multi-function displays with your Mercury SmartCraft-capable propulsion system. SmartCraft® Connect transforms your favorite multi-function display into an information portal to your boat by providing valuable engine data on the same screen as your GPS chartplotter and sonar. It makes tracking engine performance easy and convenient by putting the data right at y... Read more »

The Mercury SmartCraft® Connect module transforms your display into an information portal to your boat by delivering VesselView® functionality on the same screen as your GPS chartplotter and sonar. The VesselView system provides more engine performance data and alerts than any other monitoring system in the marine industry. Using the convenient SmartCraft Manager mobile app, you can perform ove... Read more »

Genuine Mercury spare part. Tail seal kit for Verado 225hp V6 4.80 Torpedo engines, serial no. (0P520553 - 2B144122). Read more »

Original spare part. Kit of seals for the upper part of the Mercruiser Alpha One GenII tails of the following serial numbers: • ALPHA ONE - 2A629407 and above. • ALPHA ONE GEN II - 1991-1995 - (0D469859 through 0F679999) • ALPHA ONE GEN II - 1996-1997 - (0F680000 to 0K99999999) • ALPHA ONE GEN II - 1998 and above - (0L100040 and above) Read more »

Original spare part. The rigging tube kit includes a 1.50m long tube (with a diameter of 51mm and 2.3 threads per inch) which is screwed to the coupling coming out of the VERADO engine. If used on OPTIMAX motors, the clamp must be used to connect the coupling coming out of the motor. The kit includes a plastic transom coupling that screws onto the tube and can be connected to the boat. Fits 200... Read more »

Original spare part. Valid for the following Mariner/Mercury engines: • 40 (2 CYL) – 9854537 – 0P016999 Belgium • 40 (2 CYL) – 0G055314 – 0G760299 USA • 30 JET (3 CYL) 40/50 (3 CYL) – 0G590000 – 0G760299 USA • 30 JET (3 CYL) 40/50 (3 CYL) – 9973100 – 0P016999 Belgium • 40/50 (1998) – 0E288000 – 0E344999 USA • 40/50 (1999) – 0E345000 – 0E369299 USA • 30/40 (3 CYL) –... Read more »

Genuine Mercury spare part. Tail oil drain bolt gasket, Mercury 15hp engines. Read more »

Original propeller for Mercury/Mariner outboard engines 90 - 115 hp Command Thrust (2014 and later); 135 - 400 hp (1978 and later). • Valid for Alpha and Bravo One tails with 15 tooth spline. • Material: aluminium Read more »

Genuine Mercury replacement. 50 micron stainless steel oil suction filter. For Mercury 7.6L V12 600hp Verado and 500hp Seapro (s/n 3B060051 and above). Includes 2 NBR O-rings. Read more »

Transport bag for Mercury Avator engine with wheels (15’ axle). Read more »