By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
MERCURY ANODE/TRIM TAB KT
● For applications where more clearance is required with high falling propellers
● Compatible with most Mercury / Mariner 35hp and higher engines, Force 90/120 (1995 and later), and all Mercury / Mercruiser
Weight: 0.81 Kg Length: 7.75 Width: 6.68 Height: 4.00
17%
Mercury Anode Kit Alpha One
● Aluminum anodes: for use in fresh or sea water ● Compatible with MR and Alpha One units from the years 1984-1990 (N / S6225577-0D469828) Weight: 1.75 Kg Length: 4.63 Width: 4.63 Height: 7.38
18%
Mercury Anode Kit Alpha One Gen II
● Aluminum anodes: for use in fresh or sea water ● Compatible with Alpha One Gen II units from 1991 and later (N / S 0D469859 and later) ● Original parts
Quicksilver Anode Kit for Bravo I
● Aluminum anodes: for use in fresh or sea water. Original parts. ● Compatible with Bravo One units from 1998 and later (N / S 0B66190 and later)
Quicksilver Marine Lube
● Cartridge with 3 tubes of 85 g (3 tubes of 3 oz)
Mercury Washing Accessory
●Compatible with Mercury / Mariner outboards 4-15 hp 2 cycles, 4/5/6 FourStroke and 8 / 9.9 / 15 hp (323 c.) With standard gearbox ● Allows the engine to run at idle speed
Mercury GUN & LUBE
Cartridge gun and 3 oz cartridge (85gr). Marine Lubricant 2-4-C Weight: 1.68 Length: 14.20 Width: 9.70 Height: 5.20
Mercury SERVICE KIT-100 HRS F75-115hp (2.1)
● Oil filter, fuel filter and drain seal of gearbox 75-115 hp FourStroke (2.1L) N / S: 2B094996 and later
MERCURY ANODE KIT
Description: ● Mercury/Mariner 35-300 hp ● Force 90 & 120 hp ● 1995 and newer Mercruiser Alpha one generation II ● Bravo I, II & III ● The original Quicksilver anodes do not harm the environment since they do not contain cadmium. ● To achieve maximum protection, the anodes should always be replaced when they present a 50% deterioration. Atta...
Quicksilver Pump & Lube 1L
Product description Quicksilver high-performance gear lubricant is an exclusive formulation designed to provide maximum protection and longer gear life under extreme conditions, including high-speed, high-power applications. This SAE-90 gear lubricant features improved emulsifiers to help protect gears and gears from water and adhesion to gears and internal components. There are additional...
Mercury Marine Fuel Filter
For Mariner / Mercury 30/40 HP EFI outboard motors, 40/50/60 HP EFI 75-115 HP AND 135-300 HP VERADO
Mercury Marine Fuel Filter
● In-line fuel filter used with 1/4 in. D.I. fuel lines ● Located under the hood in the outboard engine. ● Used with 1/4 "hoses. ● It is mainly used with the outboard 8 / 9.9 / 15 hp FourStroke (323 c., USA-0T003862-1B727495
Mercury FourStroke outboard oil filter
Replaceable screw cartridge filters for FourStroke outboards. Compatible with Mercury / Mariner 25 hp FourStroke (with carb., Models of the year 2006 and earlier), 30 hp FourStroke (with 3 cyl., Models of the year 2005 and earlier), all the outboards 40-60 hp FourStroke (model of the year 1998 and later), all outboards 75-115 hp FourStroke (USA 1B366822 and earlier) and all outboards 75-115 hp ...
Mercury VesselView Mobile Kit
Connect the SmartCraft digital data stream from your engine to your device iOS or Android mobile by means of BLE (Bluetooth low energy 4.0). Works on all 2003 or later engines compatible with SmartCraft (from individual applications to cuadruples), 40 hp and above (outboard, sterndrive and inboard diesel or gasoline, Joystick Piloting, Zeus Pods and Racing products).
Mercury Compensation Fin
● Compatible with most Mercury / Mariner outboards with 35 hp and above, and all MerCruiser except Bravo. Check that there is a corresponding clearance in the propeller before operation. ● The original Mercury anodes do not harm the environment since they do not contain cadmium. ● To achieve maximum protection, the anodes should always be replaced when they present a 50% deterior...
Mercury Pressure wash set
● Accessory washing the hood. The motors should not be running when the cooling system is being washed. It helps to avoid the accumulation of deposits that can clog the internal water pipes. Compatible with Mercury / Mariner V-6 engines equipped with washing systems.
Mercury Wash Seal Kit for double water inlets
It provides seals for the front water inlets for gear boxes with double water inlets. Compatible with Mercury / Mariner V-6 outboards 2000 and newer with dual water inlets; and MerCruiser Bravo One, X, XR and XZ transmissions of the year 2000 and more recent with double water intakes.
Mercury SERVICE KIT 100HRS F40-60hp
● Oil filter, high and low pressure fuel filter, oil drain seal, 2 gearbox drain seals, 40-60 EFI 4 cyl. FourStroke
Mercury SERVICE KIT 100HRS F150EFI
● Oil filter, fuel filter and lower, drain seal of the gearbox. 150 hp EFI FourStroke
Mercury SERVICE KIT 100HRS 75-115 hp FourStroke (1.7L)
● Oil filter, fuel filter, oil drain seal and 2 drain seals of the gearbox 75-115 hp FourStroke (1.7L) N / A: 1B366823 - 2B094995
Turbine 6 Blades Mercury
● Fits: Mercury / Mariner 40/50/60 hp BigFoot FourStroke 60 hp 2-cycle BigFoot 0D000750 and above 75/90/115 hp FourStroke 70/75/80/90 hp (3 cyl.) 2-cycle (s/n 0A996142 and above) and 100/115/125 hp (4 cyl.) 2-cycle (s/n 0B209468 and above) V200/225/250 hp (3.0L) 2-cycle outboards Mercury MerCruiser Alpha One Generation II (s/n 0D469859 and above)
Mercury Numeric Ignition Key
This series uses numbered keys.The back of these keys is stamped “Mercury”. To order the correct key, convert the number printed on your key into a part number. Reference Key Number 30431123 123 30431124 124 30431125 125 30431126 126 30431127 127 30431128 128 30431129 129 30431130 130 30431131 131 30431132 132 30431133 133 30431134 134 *...
Mercury Tail Oil Board
Used with the8mm drain/fill screw found on: Most Mercury/Mariner outboards of Japanese origin and most Mercury/Mariner outboards up to 8hp and 25/30hp 3-Cylinder EFI models.
Mercury Oil Tail Gasket Plug 3/8 "
Can be used with the 3/8"-16 gear case drain/fill screw found on:● All Mercury MerCruiser Sterndrives.● Most Mercury/Mariner outboards except those of Japanese origin.● It now comes as standard with all current Mercury / Mariner outboards and MerCruiser Sterndrives that usea standard3/8" drain plug.● This new seal design is less susceptible to leakage due to cracking and is ...



























