By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Cat Trailer with Crank Lalizas
Facilitates the unhitching of the trailer and allows the trailer angle to be maintained when it is not hitched. It is provided with an upper crank and a swivelling wheel. Capacity: 360Kgs Minimum height: 500mm Maximum height: 720mm Wheel: 200x40m
BOLSA ASIENTO NEUMATICA HONDA T20/T24/T25/T25/T27/T30/T32
Original Honda seat bag for inflatable boats, compatible with the following models:
T20 SE
T24 IE
T25 SE
T25 AE
T27 IE
T30 AE
T32 IE
Barton Repair Inflatable ClamSeal
Emergency repairer for tenders, RIBs and similar in the event of a breakdown at sea, for cuts of up to 90 mm in length. It can be used both below and above the waterline.
The repair is very simple, with no need for tools or glue:
Widen the opening until it is 5 cm wide.
Insert the lower part of the Clamseal through the bolt.
Tighten the two parts firmly around the tear.
Reinflate the tube. It ...
Pneumatic Seat Bag Honda T35-T38
Honda inflatable seat bag for models T35-T38, with reference 06883ZV5T21HE.
Honda T35/T38 Additional Pneumatic Seat Kit
Additional seat kit without bag, with bracket and glue, for Honda T35 AE/T38 IE tenders. Bench length: 1 metre
BOLSA ASIENTO DE ESTIBA ESTANCO PARA NEUMÁTICA
The under seat storage bag provides you with the extra storage space that is so necessary on any boat. It is made of PVC Tarpulin and has been designed to fit to any seat.
Shoulder strap: allows you to carry the bag when you leave the boat.
Padded top: the top of the bag is padded to “soften the ride” on the wooden seat.
Water resistant: it is water resistant, while the waterproof zipper keeps...
Mooring Plate with Ring Bravo
Dimensions: 95 x 175 x 22 mm.
Bravo Empty Plug
Drain plug made of nylon, with a diameter of 40 mm.
Pneumatic Roller for Boat Towing Trem
Manufactured in very tough plastic and with a Boston-type valve (ref. R25052), it is inflated for use as a launching roller. Usage recommendation: a minimum of 2 units is recommended to carry out the launching, depending on the length of the boat.
Hook for Boat Cover Application
Hook for boat cover with the following measurements and features:
Dimensions: 38x40mm. Rope hole diameter: 8 mm. Weight: 10 gr.
Railblaza Black Starport Support
This multifunctional mount helps you adapt and reuse different Railblaza accessories on any of your kayaks, canoes, motorboats, sailboats and all-terrain vehicles.
It has a sliding locking mechanism for a secure fixing, along with a cap and a gasket that prevent water from leaking in, making the StarPort base the perfect companion for any of your adventures on the water. It is made from high-qu...
Tender Lift System
System for hoisting any type of tender. The plate and buckles are made of high-strength anodised aluminium, and the shackles are made of AISI 316 stainless steel.
Maximum load 400 kg Adjustment Can be adjusted and adapted to any type of tender Certification Patented system approved by CE
Seapro Front Bag
Stowage bag for tenders Seapro. Buckles and fastening patches not included.
Tender Universal Holder 70 kg Double Offset
Manufactured in AISI 316 stainless steel with a non-slip rubber-coated support. Its special shape can accommodate any type of bottom, jet ski or keel. A single movement is enough to adjust it without moving the installed bases. The bases can be fixed or removable, and the arm is available in single and double versions. Code Base Side Support Capacity (kg) 2250604 Fixed Double lever Straigh...
Grey Handle for Boat
Grey handle 24 x 9.5 cm, designed for inflatables. It serves as an onboard grab point for holding on or handling the boat.
Osculati 4arm Lifting System for Boats and Dinghies
This kit is designed to offer several hooking point combinations when different lengths are reached ensuring the correct balance while lifting the boat. User-friendly system that can be easily modified at each haulage. It can also be used as 3-arm system. Lengths can be modified as follows: ● Crane side, using (or not) the yellow ring (+0.5 m) ● Boat side, adding half the exten...
Plastimo Pneumatic Bag with Pockets
Grey PVC saddlebag for RIBs, tenders and small boats with a bench. It mounts on the bench with velcro and is easy to fit and remove to take with you when boarding or mooring. It has 25 mm thick foam for greater padded comfort, offering comfortable seating and perfectly organised storage. It is suitable for seats of 20 cm depth x 2 cm thickness and fits all Plastimo inflatable tenders. Dimension...
Nuova Rade Non-Return Drain Valve with Plug for 25mm
● Nuova rade non-return drain valve set with plug for 25 mm. ● Pluf for 20-25mm. ● Made in polypropylene and PVC. ● Colour.: Grey
Trem Tender Lit System
Lifting slings for tenders made from UV-resistant polyester webbing UV. Supplied with adjustment buckles and a quick-release stainless steel carabiner. Maximum load 400 Kg Bow length Min. 30 cm – max. 360 cm Stern length Min. 30 cm – max. 260 cm
Honda Drain Plug Kit
Genuine Honda drain plug kit for Honwave tenders, part number 94109ZV5T00HE.




























