NMEA

Ancor enables the correct termination of an NMEA2000 network. The yellow element connects to the corresponding 'T' on the network, creating a simplified, colour-coded installation. One male and one female terminator is required on each NMEA 2000 network. Colour coded to simplify installation and component identification. NMEA2000 approved, 100% universal and compatible with other manufacturers'... Read more »

Ancor enables the correct termination of an NMEA2000 network. The yellow element connects to the corresponding 'T' on the network, creating a simplified, colour-coded installation. One male and one female terminator is required on each NMEA 2000 network. Colour coded to simplify installation and component identification. NMEA2000 approved, 100% universal and compatible with other manufacturers'... Read more »

Integrate Garmin® and Raymarine® multi-function displays with your Mercury SmartCraft-capable propulsion system. SmartCraft® Connect transforms your favorite multi-function display into an information portal to your boat by providing valuable engine data on the same screen as your GPS chartplotter and sonar. It makes tracking engine performance easy and convenient by putting the data right at y... Read more »

The Mercury SmartCraft® Connect module transforms your display into an information portal to your boat by delivering VesselView® functionality on the same screen as your GPS chartplotter and sonar. The VesselView system provides more engine performance data and alerts than any other monitoring system in the marine industry. Using the convenient SmartCraft Manager mobile app, you can perform ove... Read more »

NMEA 2000® Main / Drop cable (right angle), 2 meters. Extend your NMEA 2000 mains network with our mains/drop cables (different sizes sold separately) for your compatible MSC10 satellite compass.   Read more »

Adapter cable STNG connector 1.5 m to NMEA2000 male connector. The STNG wiring system is used to connect devices to NMEA2000. One of the advantages of the STNG is that the connector sockets are placed on the back of the displays; this allows for a smaller connector diameter and therefore easier cable routing. Products with an STNG connection can be connected to an NMEA2000 network in the same w... Read more »

Introducing the Actisense® PRO-BUF-2, the type-approved smart buffer from the PRO range. Two OPTO-isolated inputs and twelve ISO-Drive™ isolated outputs. It offers device protection and excellent flexibility, all in a single product. The PRO-BUF-2 is robust, with a stainless steel enclosure, providing isolation on all inputs and outputs. With two NMEA 0183 inputs, twelve NMEA 0183 outputs, a bi... Read more »

RJ45 Waterproof Ethernet Connector for use with NDC-5. Allows for complete customisation of Ethernet network cabling lengths, reducing cost, waste and the overall weight of your boat. Read more »

Isolated USB To Serial Gateway for use with NMEA 0183, RS422 and RS232. The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network. The USG-2 converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus.   It provides a far safer connection when compared to standard USB to serial converters. Electrical i... Read more »

USB cable accessory for use with the Actisense USG-2. Read more »

W2K-1 NMEA 2000® to Wi-Fi Gateway The W2K-1 is a rugged and reliable NMEA 2000 to Wi-Fi Gateway with built-in data logger and Actisense-i diagnostic tools. Transfer data from an NMEA 2000 backbone to any device (e.g laptop, tablet or smartphone) connected to the W2K-1 via Wi-Fi and additionally convert this data to NMEA 0183 using Actisense’s renowned conversion engine. Actisense-i is a suite o... Read more »

The new NGX-1 generation from Actisense combines the power of the two previous-generation products (NGT-1 and NGW-1) into one and acts as a gateway to convert NMEA 0183 to NMEA 2000 and vice versa. The Actisense NGX-1 USB allows you to share data bi-directionally between a PC and an NMEA 2000 network. The NGX-1 converts NMEA 0183 data to NMEA 2000 (and vice versa), allowing you to share informa... Read more »

NMEA 2000 PC Interface, standard version with USB The NGW-1-USB comes with a 1.5m standard USB Cable with a USB A Plug on the end, for easy connection to a USB Port on a PC, or a USB Hub. This device operates at 4800 baud by default. An example of where the NGW-1-USB can be used, is with a PC Application that understands NMEA 0183. Programs such as Actisense NMEA Reader and OpenCPN are commonly... Read more »

The W2K-2 is a rugged and reliable NMEA 2000-to-Wi-Fi Gateway with built-in data logger and Actisense-i diagnostic tools. Transfer data from an NMEA 2000 backbone to any device (e.g, laptop, tablet, or smartphone) connected to the W2K-2 via Wi-Fi and additionally convert this data to NMEA 0183 using Actisense’s renowned conversion engine. Actisense-i is a suite of diagnostic tools and a health ... Read more »