By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Nuova Rade Hooks fenders 20-22mm negro
The Nuova Rade fender hooks are designed to make it easier to secure and adjust the boat's fenders; simply hook them onto the handrail.
Easy securing: designed to make it easier to secure and adjust the boat's fenders.
Simple hooking: simply hook them onto the handrail.
Polyamide construction: made of polyamide.
Colours and sizes: available in two colours and two sizes.
Nuova Rade Fuel Primer Bulb 8 mm Hose with Filter
● Fuel primer bulb with 8 mm hose and filter ● Bulb diameter: 45 mm ● Material: Rubber ● Hose length: 2,70 m
Technical data
Hose material: PVC fiber reinforced
Nuova Rade Filler Cap for tank
Spare cap for the tanks of the Ercole and Sogliola models, used to close the tank on board.
Nuova Rade Pipe with connector 16mm Ercole - Sogliola
The hose with 16 mm connector from Nuova Rade is intended for Ercole and Sogliola tanks, and serves to connect the tank on board.
Nuova Rade Kit connectors straight for tanks
Straight connector kit for the tanks of the Ercole and Sogliola models, available in diameters of 38 mm and 50 mm. Used to connect the lines to these tanks on board.
Nuova Rade Kit connectors elbow 90 degrees for tanks
Kit of 90° angled and straight connectors and valve for the tanks of the Ercole and Sogliola models, available in diameters of 38 mm and 50 mm. Used to connect the inlet and outlet lines of these tanks on board.
Nuova Rade Pipe for fuel return
Connector for the fuel return, an accessory intended for the fuel tanks of the ERCOLE and SOGLIOLA models. It is used to connect the fuel return line to the tank.
Nuova Rade Black Vertical Plastic Rod holder
Black plastic vertical rod holder, 235 mm high with 40 mm internal diameter, designed to secure the fishing rod on board.
Technical data
Colour: Black
Height: 235 mm
Nuova Rade Handrail Stainless Steel
Stainless steel handrail, 22 mm diameter, designed for installation on boat ladders. Available in lengths of 47.5 and 62.5 cm, it serves as a grab rail to lean on and hold onto when climbing up or down the ladder on board.
Nuova Rade White Polyamide Cleat
Cleat for clamping • It conforms to the Afnor N.F.J.33613 Reference A B C D E 43377 60 mm 14 mm 9 mm 19 mm Ø 3 mm 43380 80 mm 16 mm 9 mm 21 mm Ø 4 mm 43383 107,5 mm 22 mm 16 mm 29 mm Ø 5 mm 43386 142 mm 29 mm 20 mm 34 mm Ø 6 mm 43389 176 mm 35 mm 23.5 mm 43 mm Ø 7 mm 43392 209 mm 45 mm 29 mm 54 mm Ø 8,5 mm
Technical data
Colour: White...
Anchor Mooring buoy reflective tape
Designed and manufactured in Italy, this Nuova Rade anchoring marker buoy is used for mooring in open sea and for marking the exact position of the anchor. The lead counterweight automatically adjusts the length of the line at depths of between 4 and 10 m, and the approved SOLAS reflective tape helps to indicate the position of the buoy at night. Operation
Lead counterweight: automatically reg...
Nuova Rade clip for Stella lifebuoy
Support clip for attaching the STELLA buoy light to any tube or rail, horizontal or vertical, from 20 to 30 mm in diameter. It allows the buoy light to be carried secured on board without needing to install it on the buoy itself.
Nuova rade Bellows for Remote Control Cable 105 mm
Black bellows for routing steering cables, with threaded ring and ABS clamp. Protects the cable exit point on board and covers the 105 mm diameter hole.
● With black ABS bracket ● Base Diameter: 105 mm ● Total Diameter: 115 mm ● Height: 52 mm
Technical data
Colour: Black
Height: 52 mm
Nuova Rade Cable Boot double screwed
Black plastic cable fairlead ring with screw-on ring, installed in a 59 mm diameter hole (89 mm total diameter and 15 mm height). It is used to route cables through the deck or panel, protecting the passage and sealing the entry.
Technical data
Height: 15 mm
Nuova Rade 60 mm Fairlead Bellows
● It can be pressure mounted onto the bulkhead of the cockpit with a special built-in flange; it does not require ring nuts or screws; the terminal is made ready for cutting. ● Possible cuts: 2 Code Colour Ø Cut-out (mm) Ø Overall (mm) Height (mm) 43160 Black 50 70 60 43159 Grey 50 70 60 43158 White 50 70 60
Technical data
Height: ...
109 mm Fairlead Bellows
● It can be pressure mounted onto the bulkhead of the cockpit with a special built-in flange; it does not require ring nuts or screws; the terminal is made ready for cutting. Code Colour Ø Cut-out (mm) Ø Overall (mm) Height (mm) 31521 Black 69 103 109 43162 White 69 103 109 43163 Gris 69 103 109
Technical data
Height: 109 mm
140 mm Fairlead Bellows
● It can be pressure mounted onto the bulkhead of the cockpit with a special built-in flange; it does not require ring nuts or screws; the terminal is made ready for cutting. Code Colour Ø Cut-out (mm) Ø Overall (mm) Height (mm) 43167 Black 76 115 140 43165 White 76 115 140 43166 Gris 76 115 140
Technical data
Height: 140 mm
Nuova Rade Outboard Motor Support with Cleft
● Straight outboard motor support. ● Ideal for small sterns. ● Protect the engine and absorb vibration. ● Made of rigid polypropylene UV stabilized. ● Non-slip surface for safety in the motor mount. Code Colour Length (cm) Height (cm) 45327 Black 45 36 45324 White 45326 Grey
Technical data
Length: 450 mm
Nuova Rade Rectangular awning support 90 degrees
Rectangular plastic support for a tube of 22 mm diameter, with a base of 74x39x38 mm and an angle of 90 degrees. It is used to secure and guide the tube of the awning or handrail on board. Technical data
Model: Straight
Code Base dimensions (mm) Diameter (mm) Angle 43246 74x39x38 22 90º
Nuova Rade Rectangular awning support 60 degrees
Rectangular plastic support for a tube of 22 mm diameter, with a base of 89x39x44 mm and an angle of 60 degrees, designed to secure tubes on pulpits and handrails. It serves as a mounting base for the awning or railing on board. Technical data
Model: Angled Awning support
Code Base dimensions (mm) Diameter (mm) Angle 43247 89x39x44 22 60º
Nuova Rade Mounting clip bimini
Mounting clip 10 mm wide for securing a bimini top to a tube of 25 mm diameter. It is used to fasten the top to the tubular frame on board.
Nuova Rade Fuel Indicator
Fuel level gauge for boats, operating at 12/24 V and allowing you to check the amount of fuel available in the tank. Available in two impedance variants, 0-190 Ohm and 240-33 Ohm.
● Fuel Indicator
● 12/24V
● Ø52 mm
● Colour: Black
● Impedances available: 0-190 and 240-33 Ohm
Nuova Rade Water Indicator
Water level gauge for panel mounting on board, 52 mm diameter, 12/24 V power supply. Available in two impedances (0-190 and 240-33 Ohm) to match the level sensor installed in the tank.
Nuova Rade Waste Indicator
Waste level indicator for tanks, operating at 12/24 V and allowing you to know the amount of liquid remaining on board. Available in two impedance variants, 0-190 Ohm and 240-33 Ohm.
● Waste Indicator ● 12/24V ● Ø52 mm ● Colour: Black ● Impedances available: 0-190 and 240-33 Ohm



























