• How do I select the correct bimini for my boat?
– Decide on the bimini type that’s most suitable for your boat
– Measure the width on your boat of where you will mount your Bimini
– Select the mounting width and preferred colour from the website
• Should I add rear solid support poles?
Adding rear support poles gives the bimini greater strength and versatility.
These poles enhance the bimini’s durability and enable convenient folding into an upright position, ideal
for trailering purposes.
• How long will the fabric last?
Our fabric comes with a 1 year manufacturing warranty and with good maintenance, such as washing off dirt and grime every few months and neatly storing the cover in the provided storage boot when not in use you should get many years of good service from the canopy’s material.
Boat Cover, Bimini Canopy and Outboard Motor Cover Care & Maintenance
• Can I replace the fabric with a different colour?
Choose from the range of colours in the link below – Fabrics
• Can I fit a clamp on rod rack to the back?
Yes, yet you will need to ensure you have back support poles for the rod rack to clamp onto.
• How do I drive on the road with the bimini?
You have two options for folding the bimini:
Option 1: Pack the bimini into the provided storage boot. Unclip the straps and/or support poles (if added), then fold the bimini down flat.
Option 2: If you’ve added back support poles, unclip the front straps, fold them back towards the back support poles (whilst standing up) and zip the fabric into the provided storage boot.
• Can I fold my bimini flat both forward and back?
While it is recommended to fold the bimini back, there might be instances where folding it forward is necessary, especially if there’s an accessory blocking the way.
However if you are folding forward, make sure the bimini doesn’t protrude beyond the sides of the boat’s bow, as this could pose issues during road transportation.
• What is the difference between the Whitewater Bimini and the Whitewater Pro?
Whitewater Pro – 3mm wall thickness tubing and 900mm high (can add 150mm extenders).
Whitewater Standard – Standard 1.6mm wall thickness tubing and 1.2m high.
• Can I cut my bimini down or increase the height?
Yes, you can trim down the bimini with a maximum trim allowance of 30cm. Please refer to the instructions provided with the bimini for guidance.
However, it’s not possible to increase the height of any bimini except for the Whitewater Pro model. For the Whitewater Pro, we offer 150mm extenders that can be plugged into the bimini for height extension.
• Can I mount my bimini on rails?
Absolutely, you can mount the bimini onto rails. Simply acquire one of our knuckles (link provided below). When installing – Instead of using the deck mount, replace it with the knuckle and attach it securely to the 25mm rail.
Please Note – If your rail diameter is smaller or larger than 25mm, you’ll need to obtain a different attachment to fit those rails, as our knuckles are designed specifically for 25mm diameter rails
• Can I mount my bimini on an inflatable or RIB boat?
Yes. Select the Inflatable Boat Deck Hinge from the website and ensure you also have a strong, marine grade adhesive to fix the deck hinge to the boat’s surface.
• How should I clean my Bimini?
-To clean your cover, use a soft brush and luke warm water
-Do not use harsh laundry soap or chemical detergent as they may damage the protective UV coating on your cover.
-A mild, soapy detergent (even dishwashing liquid) is perfect to remove dirt and grim.
-For the more stubborn and inground stains, we recommend using a polyester canvas cleaner available from most camping and auto stores.
-Air dry
Note: To prolong the life of your cover it is important that it is clean and completely dry before storing.
• Can I return or exchange the product if it doesn’t fit?
Yes, as long as the product has not been damaged. Contact us to find out how to organize the return.
