Oceansouth Trailer Guide Poles are built from a 40mm x 40mm fully galvanized square tube and a Ø63mm white PVC protective tube with a Ø3.9mm wall thickness. All galvanised parts and components allow the guide poles to be easily assembled with no drilling required. They are available for both rectangular and I-Beam trailer frames, with a selection of pole heights to choose from.
Kit Contents
• Guide Poles: White PVC guide poles for both left and right sides are included in the kit.
• Frames And Brackets: The kit includes the full frames and mounting brackets.
• Fasteners: All fasteners required for assembly are supplied.
C-Channel Trailers - Important Installation Note
Oceansouth Trailer Guide Poles are suitable for installation on C-channel trailer beams (select Rectangular beam option). However, due to the open-sided design of these beams, some flexing of the beam may occur, which can allow the guide pole mounting arm to move slightly from its secured position.
When installing on C-channel trailers, we recommend periodically checking the position and tightness of the guide pole arms, particularly when the guide poles remain fitted during extended road travel. Reposition and retighten as necessary to ensure the arms remain securely in place.
This does not affect the suitability of the guide poles for use on C-channel trailers but is an additional precaution to help maintain their correct positioning.
Pole Height Options
• MA 310-1A Or B: Vertical height from trailer attachment to top of guide pole 560mm (22”), PVC tube sleeve height 361.5mm, generic boat length sizes up to 3.4m (use as a guide only).
• MA 310-2A Or B: Vertical height from trailer attachment to top of guide pole 1000mm (40”), PVC tube sleeve height 712.5mm, generic boat length sizes 3.4m – 4.4m (use as a guide only).
• MA 310-3A Or B: Vertical height from trailer attachment to top of guide pole 1520mm (60”), PVC tube sleeve height 1232.5mm, generic boat length sizes 4.4m – 6.4m (use as a guide only).
• MA 310-4A Or B: Vertical height from trailer attachment to top of guide pole 1875mm (75”), PVC tube sleeve height 1587.5mm, generic boat length sizes 6.4m+ (use as a guide only).