Osculati

To be used with the drill beret holder. Ref: 65.230.21 • Two units. read+

To be used with the drill beret holder. Ref: 65.230.21 • Two units. read+

Foam Pads Black Bubbly for polish. • To be used with the drill beret holder. Ref: 65.230.21 • Diameter: 8 cm • Pack of 2 units. read+

Modular touch glass panel with backlit symbols. ​• It comes with a 48-stickers card to be applied under the glass showing the panel functions. ​• Leaves the surface smooth and the effect of a printed panel. Every switch can be set in 3 different modes: • Traditional ON-OFF: press a key to activate/deactivate the relating function. E.g.: COCKPIT LIGHTS • Temporary (ON)-OFF: this func... read+

Modular touch glass panel with backlit symbols. ​• It comes with a 48-stickers card to be applied under the glass showing the panel functions. ​• Leaves the surface smooth and the effect of a printed panel.   Every switch can be set in 3 different modes: • Traditional ON-OFF: press a key to activate/deactivate the relating function. E.g.: COCKPIT LIGHTS • Temporary (ON)-OFF: thi... read+

• Equipped with drive gears on both sides of the drum for high traction with small dimensions. • The maximum pulling load refers to the use with only one turn of rope on the drum.   Reference Max. pull Ratio Max. capacity Measure Drive 02.160.00 727 kg 3.5:1 33 m (Ø 3 mm) 14 m (Ø 5 mm) 90 x 160 x 130 mm Adelante, inactivo, inverso 02.161.00 900 kg 4.1:1 24 m (Ø 5 mm) 13 m (Ø 8 ... read+

• Material: PVC pre-inflated.   Reference Model Length Dimensions Weight A B C D 33.517.21 Angular 25 cm 8.5 cm 7.4 cm 12 cm 3.9 cm 0.6 kg 33.517.22 Recto 43 cm 8.5 cm 7.4 cm 12 cm 3.9 cm 0.56 kg read+

• Material: PVC with a needle valve.   Reference Type of fastening Length Section Weight 33.519.63 On plane 93 cm 15 x 10 cm 2.6 kg 33.519.67 Vertical (support ear) 39 cm 15 x 10 cm 1.2 kg read+

• Scratch-resistant glossy surface. • Complete with central axle in RILSAN-coated steel. • High precision lower swivel. • Filled with closed-cell polyurethane foam.   Reference Diameter Circumference Body length Total length Thrust 33.177.01 46 cm 142 cm 55 cm 90 cm 56 kg 33.177.02 55 cm 178 cm 65 cm 92 cm 107 kg read+

Watertight white/transparent ABS inspection hatch Fitted with rear nylon object/document holding bag. read+

Oil outlet filter, suitable for all Volvo models from MD30 to TAMD103P-A (ref. orig.876069-6). read+

• Made of white ABS, fitted with fully faired cover, hides the frame completely.  • Flush-mount front bulkhead, the pocket may be mounted with the opening towards the top or bottom. Dimensions: • Depth: 190 mm • Outside: 600 x 250 mm • Inside: 530 x 190 mm *Optional lock. Ref. 20.093.00 read+

• 180° opening. • Very robust. • Non-slip finish. Dimensions: • Outside: 350 x 600 mm • Internal: 265 x 513 mm • Cut: 280 x 530 mm • Lock kit: 20.093.00 *Dimensions interchangeable with Ref. 20.301.00 and Ref. 20.302.00.   read+

• Splash-Proob lid seal with neoprene gasket. • Flush mounting. • Can be used as a hatch for chests, fishing tanks, or as storage hatches and bulkheads opening to 160°. • Installable on any recreational unit with design category A, B, C, D in area II a, III, IV. • Watertightness grade 2.   Reference Outside Inside 20.301.60 280 x 380 mm 180 x 280 mm 20.302.6... read+

• The faired cover hides the frame completely.  • 100% flush hinges.  • 180° opening.  • Walking surface.  • UV BASF resistant. • It can be installed on any sports craft, boat design category A, B, C, and D, area II a, III, IV, watertightness degree 2. read+

Characteristics: • Material: polyethylene. • Depth: 180 mm • Outside: 380 x 280 mm • Inside: 280 x 180 mm • Lid: Ref. 20.301.00 *Locking lock for hatch (optional): 20.093.00 read+

Characteristics: • Material: polyethylene. • Depth: 180 mm • Outside: 380 x 280 mm • Inside: 280 x 180 mm • Lid: Ref. 20.291.00 *Locking lock for hatch (optional): 20.093.00 read+