Osculati

Butterfly bracket. Reference Bracket For pipe Ø Roller to be installed 02.029.36 4 raised rollers 40 mm 02.029.07 read+

Wheel with enlarged technopolymer part and lowered rubber coating read+

Vertical axis windlasses in AISI 316 stainless steel. Available in high or low profile versions, with various motorisations. Recommended for boats up to 11 m. Comes with an integrated meter counter sensor.Model: High bell + gypsy. Reference Motor - V Motor - W Average Consumption Sprocket Ø Line Ø Max. pulling capacity Workload Line speed Weight 02.411.31 12 V 500 W 60 A 6 mm... read+

Vertical axis windlass entirely in AISI316 stainless steel. Available in high or low profile versions with various motorisations, recommended for boats up to 14 m. Equipped with a rope tension system and integrated meter counter. Reference Motor - V Motor - W Average Consumption Sprocket Ø Line Ø Max. pulling capacity Workload Line speed Weight 02.414.42 12 V 1000 W 115 A 8 m... read+

Genuine leather protective cover, very elegant and extremely functional. • Velcro fastening system with non-slip straps.• Protects mooring lines from wear at contact and friction points with the vessel.*Sold in pairs. Reference For ropes Ø Length 06.455.01 16/24 mm 50 cm 06.455.02 24/32 mm 80 cm 06.455.03 34/42 mm 100 cm read+

Manufactured in the same dimensions as those of OMC, Yamaha, Mercury, etc. original hoses. read+

Spare bulb for a wide range of navigation lights and crosstree lights. Reference V W Watertight bulb version Length 14.249.02 12 100 - 110 mm (4") 14.249.04 24 100 - 140 mm (5"3/4) 14.249.05 12 100 - 178 mm (7") 14.249.06 24 170 - 178 mm (7") 14.249.07 12 35 Grooved for crosstree lights 110 mm (4") 14.249.08 24 50 Grooved for crosstree lights 110 mm (4") 14.249.11 12 50 Grooved... read+

Mirror-polished stainless steel body. 100% watertight. 350° horizontal and 55° vertical rotation. Two speeds. 100W + 90W H4 halogen double-filament bulb (spot + flood).Protection against electronic interference.Headlights can be connected to 2 types of optional controls (independent or combined) for the desired configuration:1) Console-operated joystick. 4.5-m cable included. Additional... read+

225° navigation light Art. 11.415.03 compliant with IMCO and RINA standards. Paired with special 35 W 12 V halogen spotlight with dichroic front glass (replacement bulb 13.258.57).Made entirely of black polycarbonate, perfectly watertight.Special flexible system of side straps allowing use on masts of any size.Mount the RINA approved light 11.415.03 (replacement bulb 14.300.00). Specificati... read+

Accessories for LED strips 13.704.12, 13.704.24, 13.705.12, 13.705.24. Specifications Reference Description 13.705.03 90° cable outlet end cap 13.705.04 Straight cable outlet end cap 13.705.05 Blind end cap 13.705.01 Aluminium mounting clips for LED strip 13.705.10 Flexible stainless steel support for 2 m LED strip. It can be used as a single piece, cut into sections, or used a... read+

ABS body, satin polycarbonate lens. Protection grade IP21. Specifications Reference Finishing V W Mounting Switch lumen K LED beam angle No of LEDs Light colour 13.833.11 White 12 3,5 Recessless Yes, toggle switch 210 3000 120° 42 White 13.833.12 Chromed 12 3,5 Recessless Yes, toggle switch 210 3000 120° 42 White read+

It can be used with the following fuses: standard, mini, micro, standard resettable, mini resettable et micro resettable. Specifications Reference Fuse holders Base mm Max load A Maximum single fuse load 14.100.81 4 85x31 30 15 14.100.82 6 100x31 45 15 14.100.83 8 120x31 60 15 14.100.84 10 140x31 90 15 read+

It is required for connecting cables. Specifications Reference To connect plugs To connect cables 14.110.30 [14.102.00] with 14.305.00 [14.103.00] [14.305.10] [14.210.30] [14.211.30] with Pin Tail 16 14.110.50 [14.587.04] [14.636.10] [14.771.70] with 14.587.03 [14.211.50] with Pin Tail 30 read+

To seam on cables and to connect to the fuse holder (2 per each fuse). Specifications Reference Cable contact mm 14.118.02 2,5/6 14.118.01 1/2,5 *Sold in lots of 5 units. read+

Electrical joints with insulated heads and watertight sealings can be easy done with just one operation (using the industrial heater model 14.122.12 or with a normal lighter); the connection is made through soldering, giving a reliable electrical connection, even for numerous small cables. Specifications Reference Total mm² - min Total mm² - max Colour 14.126.04 2 4 red 14.126.... read+

Ideal for insulating electrical lugs or to trim splices on ropes. Maximum contraction ratio of 2:1. Specifications Reference Ø internal starting diameter mm Colour Roll m 14.130.03 6,4 Black 10 14.130.04 9,5 Black 10 14.130.05 12,7 Black 10 14.130.06 19,1 Black 10 14.130.07 25,4 Black 10 14.130.08 38 Black 5 *Sold by full roll. read+

Reference A mm B mm C mm 14.155.01 14,5 8,6 6,5 14.155.02 17,2 10 7,9 14.155.03 22,2 11,1 9,1 *Sold in lots of 5 units. read+

To let cables through bulkheads. High-resistance moulded nylon with inside overmoulded seal. Easy to install. Specifications Reference Material Ø mm For cables 14.175.04 Plastic 71 Up to 4 cables, 7- to 15-mm Ø 14.175.10 Plastic 71 Up to 10 cables, 5- to 7-mm Ø read+

It is compatible with standard circuit breakers (ex. 14.733.xx) that are easier to install than blade fuses.With clear lid with a space for function labels (60 x labels standard supply).The watertight circuit cap allows to reset the circuits without removing the lid.Screw terminals. Specifications Reference V Power supply Maximum per circuit To cumulative maximums mm 14.182.06 max 32 Indep... read+

Crimping tool with interchangeable dies. Ergonomic antislip handle. Specifications Reference Description 14.184.02 Die kit for 0.5- to 6- mm2 insulated lugs 14.184.03 Die kit for 0.5- to 6- mm2 heat-shrinking connectors 14.184.01 Tool only for 0.5- to 6- mm2 lugs read+