Osculati

This system ensures the following advantages in a single product:• Easy installation (1 operator only)• Pre-assembly of the gate valve and hose holder at the workbench (threaded version)• Locknut for positioning the gate valve in the desired position (threaded version);• Drainage without unwanted siphon formation thanks to 13° inclination• Integrated non-return valv... read+

Made of white plastic, fitted with 90° hose adaptor. Specifications Reference Type Thread Ø mm length Hose adaptor mm 17.354.80 1” 33 42 25 17.354.81 1” 33 42 19 read+

Specifications Reference Ref. Orig. Engines 17.504.28 15412-92J00 70/200 HP 4 strokes 17.504.29 15412-93J10 200/350 HP 4 strokes 17.504.55 15410-87J10/20 25/140 read+

Supplied with mirror polished ground connections. Specifications Reference Thread A mm B mm C mm D mm Ø mm 17.524.01 1/2” 18 28 60 38 19 17.524.02 3/4” 24 36 68 50 24 17.524.03 1” 30 33 72 55 31 17.524.04 1” 1/4 38 39 77 65 39 17.524.05 1” 1/2 44 40 78 72 44 read+

Supplied with mirror polished ground connections. Specifications Reference Thread For pipe Ø mm Max hull thickness mm 17.526.05 1" 1/2 38 25 17.526.04 1" 1/2 32 25 17.526.06 1" 1/2 51 25 read+

They also serve as water/diesel separators with a filtration rate of 10 microns.Complete with hose connector. Specifications Reference Flow rate l/h - max Flow rate l/h - continuous Type ADAPTERS INCLUDED mm weight 17.667.01 227 180 500MA 3/8" 292x147x122 2 17.667.02 341 270 900VMA10 3/4" 432x220x202 4,9 17.667.03 680 540 1000VMA10 3/4" 557x220x202 5,6 read+

Specifications Reference Variant For filters 17.667.21 30 micron 500MA 17.667.41 10 micron 500MA 17.667.22 30 micron 900MA 17.667.23 30 micron 1000MA 17.667.42 10 micron 900MA 17.667.43 10 micron 1000MA read+

Made of AISI 316 stainless steel, deviation; fitted with handle lock. "T" maneuvering. Specifications Reference Thread 17.722.01 3/8" 17.722.02 1/2" 17.722.03 3/4" 17.722.04 1" 17.722.07 2" read+

Made of AISI 316 stainless steel; fitted with handle lock, meets with ISO 8099 standard for waste water drainage regulations. Specifications Reference Size 17.722.05 1" 1/4 17.722.06 1" 1/2 read+

Specifications Reference Type Height mm 3/8" hose holder OPTIONAL 17.940.00 Cold, only 210 17.199.XX 17.935.00 Hot/cold 210 17.199.XX read+

Made of self-extinguishing nylon with elastic wings and snap lock. Central screw mounting. Specifications Reference Ø tube min/max mm Resistance to release from N pcs 18.008.02 12/16 23 75 18.008.03 16/23 23 50 18.008.04 20/25 25 50 18.008.05 25/32 31 25 18.008.06 32/40 40 20 18.008.07 40/60 50 15 *Sold in lots of 5 units. read+

Made of rubber-coated stainless steel; ideal for fixing copper pipes (hydraulic wheelhouses, flaps, supply pipes), device to dampen vibrations, electric ducts, water pipes etc. Specifications Reference Inside Ø mm Band width mm AISI 18.024.08 8 16 304 18.024.10 10 16 304 18.024.12 12 16 304 18.024.14 14 16 304 18.024.16 16 16 304 18.024.18 18 16 304 18.024.20 20 16 304 ... read+

Mounting does not require cable or pipe perforation. Specifications Reference Useful passage mm 18.030.01 5x5 18.030.02 8x11 *Sold in lots of 5 units. read+

Made of 6/6 nylon. Push the hook on the rack and the clamp will open. The clamp can be used over again. Specifications Reference A mm B mm Ø max beam mm Colour Maximum holding capacity kg 18.032.50 200 7,5 50 white 22,4 18.032.52 350 7,5 100 white 22,4 *Sold in lots of 5 units. read+

Made of nylon and special additives, these clamps resist up to 125°C continuous and to 145°C for short periods. Greenish neutral colour depending on their heat resistance.Neutral colour tending towards green, due to particular heat resistance. Specifications Reference A mm B mm Ø max beam mm Maximum holding capacity kg 18.032.60 98 2,5 21 8,16 18.032.61 140 3,5 35 18,34 ... read+

Fitted with central mounting system with one nylon screw, type approved RINA 5/043/93. Specifications Reference Maximum width of clamps mm mm 18.034.05 5 9.5x15x7h 18.034.09 9 15x22x11h *Sold in lots of 5 units. read+

Requires one screw for mounting, made of white nylon. Specifications Reference Base (AxB) mm Width (C) mm For bundles max Ø mm pcs 18.035.01 25x18 8 17 100 18.035.03 30x21 12 26 100 18.035.02 30x21 12 22 100 read+

With screw-fitting eyelet; ideal for fixing electric systems, water pipes, control cables, etc. Specifications Reference For bundles max Ø mm B mm C mm D mm pcs 18.036.01 4,7 9,5 9,6 4,2 100 18.036.02 7,8 9,5 11,2 4,2 100 18.036.03 12,7 9,5 14 4,2 100 18.036.04 16 12,7 16,8 5,2 100 18.036.05 19 12,7 19,9 5,2 100 18.036.06 25,4 12,7 23,1 5,2 100 18.036.07 31,7 12,7 26,9 5... read+

Suitable for cabling, includes over-writable pad with felt-tip pen suitable for the identification of cables or pipes. Specifications Reference Width mm Ø clamping mm - minimum Ø clamping mm - Maximum Length mm Maximum holding capacity kg 18.038.01 2,5 1 20 110 8,1 18.038.02 2,5 1 52 210 8,1 *Sold in lots of 5 units. read+

Rubber-coated and made of AISI 304 stainless steel. Specifications Reference Passage Ø mm 18.040.08 8 18.040.10 10 18.040.12 12 18.040.14 14 18.040.16 16 18.040.18 18 18.040.20 20 18.040.22 22 18.040.26 26 18.040.30 30 18.040.36 36 18.040.40 40 18.040.46 46 18.040.50 50 18.040.60 60 read+

Outer rack, high grip, possible use in temporary position, UV-resistant.Material: technopolymer Specifications Reference Head Length mm Width mm Ø max beam mm Maximum holding capacity kg 18.053.01 Single 115 6 25 28 18.053.02 Single 180 6 45 28 18.053.03 Single 290 6 78 28 18.053.08 Double 260 9 60 55 18.053.10 Double 360 9 93 55 *Sold in lots of 5 units. read+

Made of mirror polished AISI 316 stainless steel. Specifications Reference Flange Ø mm Length mm Hose adaptor mm 18.347.00 48 53 24 18.347.10 60 69 38 read+