By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
U-bolt with self-gripping safety nut
Stainless steel U-bolt with self-locking safety nut. The specifications table lists the three available variants with their measurements.
Specifications
Reference
D1
L1 mm
L mm
D mm
A mm
39.123.01
M8
60
100
10
40
39.123.02
M10
48
100
12
40
39.123.03
M12
58
120
14
50
1.7-mm hinges
Hinge in screwless stainless steel, with a thickness of 1.7 mm. It is equipped with a female bushing, threaded 4MA, welded under the hinge in the same position as the through holes.
Specifications
Reference
mm
Shape
No. of bushings
38.821.01
51x38
Rectangular
4
38.821.02
51x45
Rectangular
4
AISI316 mirror polished stainless steel cover for hinges
Made from mirror-polished stainless steel, with self-adhesive fixing and vibration damping by means of a braked central shaft. Supplied as 1 unit(s) for 1/2 hinge, according to the reference indicated.
Reference
Units
For hinge
38.840.10
1 unit(s) for 1/2 hinge
[38.556.00] [38.840.58]
Raymic second station for Ray63 / Ray73
The Raymic remote microphone allows the functions of the VHF Raymarine radio to be controlled from a second station on board, as well as using the intercom function between stations to make communication easier from different locations on the vessel. Features
Compatible with VHF Raymarine Ray63 and Ray73 radios. Allows remote control of the radio. Intercom function between stations. Possibilit...
Powered stay for hatches type model Ulysses designed for light loads
Electrical linear single mounting stay, 34-mm Ø body, 65-kg maximum thrust, absorption 2 A at 12 V, speed 4 mm/sec at 12 V, 6 mm/sec at 24 V. Fitted with aluminium body and stainless steel telescopic stem, water resistant IP65. Total or partial hatch opening in all desired positions.They cannot be mounted in pairs. Specifications Reference Stroke mm Thrust kg Closed mm V 38.370.40 1...
354,50€
Rosettes for locks
Chromed brass. Sold in pairs. Specifications Reference Ø mm Version 38.348.11 45 Round hole 38.348.10 28x53 Round hole
Nickel-plated brass rail and carriage slide for sliding doors
Manufactured in nickel-plated brass, it is designed to be mounted on the lower part of the door. The rail is sold in bars of 2 metres.
Specifications
Reference
Product
mm
Notes
38.342.90
Carriage
64x37
Wheel Ø 30 mm
38.342.80
Rails
30x12x2000
Stainless steel rail and carriage slide for sliding doors
The system consists of stainless steel rails and sliding carriages that are fitted to the top and bottom of the door. Each door requires two carriages. The table lists the available references with the part, its description, the dimensions in mm, the mounting and an image of each item.
Reference
Part
Description
mm
Mounting
38.342.70
bottom
Carriage with wheel
38x15
Each door requires tw...
Locker anti-vibrating lock with stainless steel cover
Manufactured in elastic thermo-rubber with a front of mirror-polished stainless steel. It has an eccentric lever locking closure and a spring travel of 6 mm. Specifications
Reference
mm - A
mm - B
mm - C
mm - D
Eye with closing hole
38.200.10
95
19
30
12
no
38.200.11
95
19
30
12
yes
Antitheft device made of stainless steel for outboard engines
It locks the wing nuts and is equipped with marine padlock with chromed-brass body, stainless steel arc and springs, water self-draining system. Specifications Reference Length mm Recommended for engines up to HP 38.176.10 230 25 38.176.11 280 over 25
SECURE LOCK antitheft device for outboard engines
Locks the butterfly nut: So the engine cannot plunge into the water; prevents the outboard engine from been stolen, as it the Secure Lock must be broken. Made of anodized aluminium pipe thickness 4 mm (very sturdy); brass and stainless steel lock with two keys. Tough sturdy look discourages thieves; compact model with in stainless steel end-pieces and inner pipe made of anti-rattle foam Specifi...
Pivoting magnetic door stoppers
Body made of AISI 316 stainless steel, mirror polished. Pulling force 5 kg. Reference 38.155.34 Low-profile stop 38.155.35 High-profile stop 38.155.44 External counterplate 38.155.45 Recessed counterplate
RAYMARINE Ray73 VHF radio
Full-size VHF radio, loaded with the essential communication features that every navigator needs. Add the optional handset and you can use your Ray73 from two locations on board; the microphone also allows station-to-station intercom communication. Thanks to the optional Raymic microphone, you can have full control of the radio and the intercom function from a second remote station.
Transceive...
RAYMARINE Ray63 VHF radio
The Ray63 is a full-size VHF radio transceiver that brings together the essential communication features every navigator needs. With the optional handset accessory you can use your Ray63 from two locations on board, and its microphone also enables station-to-station intercom communication. Thanks to the optional Raymic microphone, you will have full control of the radio and the intercom functio...
Pillow Block Bearing Support
Support base for an oarlock, designed for installation on inflatable boats. It accommodates the oarlock used to support the oar while rowing.
Jabsco Ball bearing 92600-0500
Ball bearing 92600-0500
Genuine Jabsco replacement bearing, designed for Jabsco impeller cooling pumps.Technical specifications:
Jabsco Ball bearing 92600-0330
Ball bearing 92600-0330
Genuine Jabsco replacement bearing, designed for Jabsco impeller cooling pumps.Technical specifications:- Position in the pump (Jabsco catalogue): inner bearing- Used in Jabsco pump series: 1673, 2620
Jabsco Ball bearing 92600-0060
Ball bearing 92600-0060
Genuine Jabsco replacement bearing, designed for Jabsco impeller cooling pumps.Technical specifications:- Outer diameter: 52 mm- Inner diameter: 225 mm- Width: 15 mm- Maximum load capacity: 500 kg- Maximum rpm: 6.000 rpm- Position in the pump (Jabsco catalogue): inner bearing- Used in Jabsco pump series: 2300, 3190, 3590, 5330, 5560, 5660, 5840, 7120, 7260, 7320 and oth...
Jabsco Ball bearing 92600-0040
Ball bearing 92600-0040
Genuine Jabsco replacement bearing, designed for Jabsco impeller cooling pumps.Technical specifications:- Outer diameter: 45 mm- Inner diameter: 20 mm- Width: 12 mm- Maximum load capacity: 250 kg- Maximum rpm: 4,500 rpm- Position in the pump (Jabsco catalogue): inner bearing- Used in Jabsco pump series: 2570, 3110, 3240, 3570, 6400, 6590, 7420, 8150, 8950, 11870 and oth...
Jabsco Bearing seal 817-0000
Bearing seal 817-0000
Genuine Jabsco replacement bearing gasket.Technical specifications:- Outer diameter: 57 mm- Inner diameter: 34 mm- Width: 6 mm- Position in the pump (Jabsco catalogue): inner seal- Used in Jabsco pump series: 2570, 3110, 3240, 6400, 6590, 6980, 7420, 8150, 11870, 12600 and others (see Jabsco catalogue)
Jabsco Gasket 816-0000
Gasket 816-0000
Genuine Jabsco replacement gasket for flexible impeller pumps.Technical specifications:- Diameter: 117 mm- Position in the pump (Jabsco catalogue): end cover gasket- Used in Jabsco pump series: 2570, 3110, 3240, 3570, 6400, 6590, 6980, 7420, 8950, 11870 and others (see Jabsco catalogue)
Jabsco Regular toilet bowl
Original standard toilet bowl spare part Jabsco, reference 29126-0000. Listed in the exploded views Jabsco as item 2 (standard toilet bowl) of the electric toilet series 37010. Compatibility
Compatible with all manual toilets Jabsco of series 29120 from production year 1986, as well as with series 37010-109X, 37010-4X9X, 37045-109X, 37045-4X9X, 37245-109X and 37245-4X9X, up to production year 2...
Jabsco Compact toilet bowl
The compact toilet bowl 29096-0000 is a genuine Jabsco spare part. According to the exploded views from Jabsco, it corresponds to item 2 (bowl, compact toilet) in the 37010 electric toilet series.
Jabsco Kit Wearplate 2574-0000
Kit Wearplate 2574-0000
Genuine Jabsco replacement wear plate for flexible impeller pumps: it takes the friction of the impeller and is replaced when worn.Technical specifications:- Material: brass- Diameter: approx. 90.5 mm- Thickness: approx. 3.4 mm- Inside hole diameter: approx. 45 mm- Position in the pump (Jabsco catalogue): wear plate- Used in Jabsco pump series: 2570, 3110, 3240, 3570, 6...



























