By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Jabsco End cover pump 50355-0000
End cover pump 50355-0000
Genuine Jabsco replacement end cover for flexible impeller pumps: it closes the impeller chamber and is fixed to the pump body with screws.Technical specifications:- Diameter: approx. 96.9 mm- Thickness: approx. 3.5 mm- Diameter of hole circle (centre hole to centre hole) approx. 85.0 mm- Holes: 4- Position in the pump (Jabsco catalogue): end cover- Used in Jabsco pum...
Jabsco Bronze pump 2" electro,AGNETIC friction 24V
Bronze pump 2" electro,AGNETIC friction 24V
Jabsco bronze electromagnetic clutch pump, self-priming, with neoprene flexible impeller, for heavy duty. 24 V, 2-inch version with carbon/ceramic mechanical seal.Technical specifications:- Size: 2 inch
Jabsco 2" bronze pump with 12V electromagnetic clutch
2" bronze pump with 12V electromagnetic clutch
Jabsco bronze electromagnetic clutch pump, self-priming, with neoprene flexible impeller, for heavy duty. 12 V version with carbon/ceramic mechanical seal.Technical specifications:- Ports: 2" BSP female- Length: 270 mm, pulley diameter: 180 mm (2A pulley), 173 mm between ports- Flow: 267 litres per minute (59 gallons) at 3 metres total head
Jabsco 1-1/2" bronze pump with 24V electromagnetic clutch flange
1-1/2" bronze pump with 24V electromagnetic clutch flange
Jabsco 1-1/2" bronze electromagnetic clutch pump, size 200, foot mounted with flanged ports, for heavy-duty bilge and deck wash.Technical specifications:- Voltage: 24 V- Self-priming up to 3 m vertical lift- 24 volt DC electric clutch with 2 A pulley- Connections: flanged ports with 1½‘ nominal bore with 1½’ BSP counterflanges- Fuse siz...
Jabsco Maintenance kit for DELUX toilet
Original spare maintenance kit Jabsco (58100-2000) for Deluxe Flush toilets. It is intended for the Deluxe Flush waste pump (58XX0) and brings together in a single kit the parts included in catalogue Jabsco for its maintenance.
Kit contents
1 x retaining strap, discharge port
1 x retaining strap, motor
1 x retaining block, motor
1 x hose clamp, large
1 x inlet hose, discharge pump
1 x hose cla...
Jabsco Twin pressure pump and tank system 24 V 34 l/min
Twin pressure pump and tank system 24 V 34 l/min
Jabsco combined system with two autoclave pumps and tank: two 4-valve pumps complete with expansion tank, self-priming up to 3 m.Technical specifications:- Maximum flow: 34 l/min- Self-priming up to 3 m- 19 mm hose barb connections- Dimensions: 34.5 x 34.5 x 31 cm
Jabsco Twin pressure pump and tank system 12 V 34 l/min
Twin pressure pump and tank system 12 V 34 l/min
Jabsco combined system with two autoclave pumps and tank: two 4-valve pumps complete with expansion tank, self-priming up to 3 m.Technical specifications:- Maximum flow: 34 l/min- Self-priming up to 3 m- 19 mm hose barb connections- Dimensions: 34.5 x 34.5 x 31 cm
Jabsco Pressure pump and tank system 12 V 40 PSI
Pressure pump and tank system 12 V 40 PSI
Jabsco combined autoclave and tank system: 4-valve autoclave pump complete with expansion tank, self-priming up to 3 m.Technical specifications:- Maximum flow: 18 l/min- Self-priming up to 3 m- 19 mm hose barb connections- Dimensions: 25 x 24 x 31 cm
Jabsco Bronze pump 2"
Bronze pump 2"
Jabsco 2" bronze pump with flange, 270 L/min flow.Technical specifications:- Flow rate 270 L/min- Prevalence 4.5 m- Dimensions 280x170x128 mm- Weight 5 kg
Jabsco End cover pump 52239-0000
End cover pump 52239-0000
Genuine Jabsco replacement end cover for flexible impeller pumps: it closes the impeller chamber and is fixed to the pump body with screws.Technical specifications:- Pump size: 200
Jabsco Bronze pump 1"
Bronze pump 1"
Jabsco bronze self-priming cooling water pump, 1" BSP ports, neoprene impeller included.Technical specifications:- Ports: 25 mm (1") BSP female thread- Neoprene impeller included- Flow rate: Nominal 80 litres/min at 1,500 rpm
Jabsco Bronze pump 3/4"
Bronze pump 3/4"
Jabsco bronze self-priming cooling water pump, 3/4" BSP ports, neoprene impeller included.Technical specifications:- Ports: 19 mm (3/4") BSP female thread- Neoprene impeller included- Flow rate: Nominal 40 litres/min at 1,500 rpm- Length: 240 mm- Width: 110 mm- Height: 130 mm (130 mm)
Jabsco Bracket kit for series 37202-20XX
Bracket kit for series 37202-20XX
Genuine Jabsco replacement bracket kit for the Jabsco 37202-20xx drain and bilge pump.Technical specifications:
Jabsco Bronze pump 1" electromagnetic friction
Bronze pump 1" electromagnetic friction
Jabsco 1" BSP bronze electromagnetic clutch pump with flexible impeller.Technical specifications:- Ports: 1" BSP- Pump length: 160 mm, pulley diameter: 180 mm- With 2.5 A fuse: flow 80 litres/minute at 1500 rpm and total head of 3 m
Jabsco Cam 490-0001
Cam 490-0001
Genuine Jabsco replacement cam for flexible impeller pumps: it flexes the impeller blades as they rotate and creates the pumping action.Technical specifications:- Position in the pump (Jabsco catalogue): cam- Used in Jabsco pump series: 1673, 4560, 18830, 18840
Jabsco Pumpgard 90° filter 40 mesh
Pumpgard 90° filter 40 mesh
Jabsco Pumpgard 90° pre-filter: it traps debris before it reaches the pump and protects its internal parts.Technical specifications:- Pumpgard 40-mesh filter (openings approx. 0.4 mm), 90° design, plug-in port inlet (f) x plug-in port outlet (m) for Jabsco / Flojet pumps 2-5 GPM- Maximum pressure 5 bar (70 PSI)- Dimensions: length approx. 70 mm (plus port) / width a...
Jabsco Pumpgard 90° filter 40 mesh
Pumpgard 90° filter 40 mesh
Jabsco Pumpgard 90° pre-filter: it traps debris before it reaches the pump and protects its internal parts.Technical specifications:- Pumpgard 40-mesh filter (openings approx. 0.4 mm), 90° design, plug-in port inlet (f) x plug-in port outlet (m) for Jabsco / Flojet pumps 6-7 GPM- Maximum pressure 5 bar (70 PSI)- Dimensions: length approx. 89 mm (plus port) / width a...
Jabsco Mini filter 40 mesh
Mini filter 40 mesh
Jabsco 40-mesh straight mini filter for pressurised and high-pressure water systems with drinking and salt water.Technical specifications:- Straight design, 40 meshes per square inch, push-in inlet connection (female) for Jabsco / Flojet 2-4 GPM ports and push-in outlet (male) for Jabsco / Flojet 2-4 GPM pumps- The size of the filter surface area of the mini filter is appro...
Jabsco Pumpgard 90° filter 1/2" QEST 40 mesh
Pumpgard 90° filter 1/2" QEST 40 mesh
Jabsco Pumpgard 90° pre-filter: it traps debris before it reaches the pump and protects its internal parts.Technical specifications:- Pumpgard filter with 40 meshes per square inch (approx. 0.4 mm openings) at 90° with 1/2" threaded pipe connection and plug-in outlet for 2-5 GPM Jabsco / Flojet pumps- Maximum flow rate 23 LPM (6 GPM)- Maximum pressure 5 ba...
Jabsco In-line filter 1/2" QEST 40 mesh
In-line filter 1/2" QEST 40 mesh
Jabsco Pumpgard in-line pre-filter: it traps debris before it reaches the pump and protects its internal parts.Technical specifications:- Pumpgard Pre-filter with 40 meshes per square inch (approx. 0.4 mm openings) in line with 1/2" qest pipe connections each- Maximum flow rate of 23 LPM (6 GPM)- Maximum pressure 5 bar (70 PSI)- Dimensions: length approx. 121 m...
Jabsco Handle for valve Y 45490
Original replacement lever Jabsco for the Y-valve 45490. Technical specifications
Kit reference: 45493-0000.
Jabsco Service kit for VALVO Y 45490
Service kit for VALVO Y 45490
Genuine Jabsco replacement service kit for the 45490 Y valve.Technical specifications:
Jabsco Impeller 4528-0001-P
Impeller 4528-0001-P
Genuine Jabsco service kit: neoprene impeller with gasket set, to restore the pump with a single part number.Technical specifications:- Material: neoprene- Jabsco impeller profile: D- Outer diameter: 40 mm (1-9/16")- Depth: 19 mm (3/4")- Shaft diameter: 9.5 mm (3/8")- Number of blades: 6- Jabsco drive type: no. 1 o 2- Insert material: brass- Used in Jabsco pump series: 276...
Jabsco Pressure switch 1,4 bar (20PSI)
Pressure switch 1,4 bar (20PSI)
Jabsco pressure switch: it starts and stops the pump according to the system pressure.Technical specifications:- Pressure switch setting: 1.4 bar / 20 PSI



























