New Products

This powder-coated, marine-grade aluminum Humminbird mount consists of a short length double socket arm, a 3.68" diameter round base with a 2.25" D size ball, and one 1.5" x 4.5" rectangular plate with a 2.25" D size ball. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The 1.5" x 4.5" rectangular plate contains a 4-hole pattern compatible wit... read+

The RAM-S-D-111U-C is a mounting solution featuring a 3.68" diameter round base, a short length double socket arm, an 11" x 3" rectangular base, and a RAM mixed combination Pin-Lock security nut and key knob.   Round Base Features • Pre-drilled holes for secure installation • Two holes at 180 degrees • Three holes at 120 degrees   Rectangular Base Features • Different combinations of ... read+

The RAM-S-D-111 consists of a 3.68" diameter round base, Standard Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut and key knob. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic... read+

The RAM-SG-B-111U consists of a 2.5" diameter round base, standard length double socket arm, 6.25" x 2" rectangle plate, RAM mixed combination Pin-Lock security nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with ... read+

The RAM-S-111U consists of a 2.5" diameter round base, Standard Length double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security nut and key knob. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device. read+

The RAM-SG-D-111U consists of a 3.68" diameter round base, Standard Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut/knob and key knob for Gimbal Brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will ... read+

The RAM-S-B-111U consists of a 2.5" diameter round base, short length double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security nut and key knob. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device. read+

The RAM-SG-D-111U-C consists of a 3.68" diameter round base, Short Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut/knob and key knob for Gimbal Brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will m... read+

read+

The RAP-107U consists of a composite 2.5" diameter round base with the universal Amps hole pattern, composite double socket arm, and connecting Humminbird/Apelco marine adapter base.   Mounting System • Patented rubber ball and socket system with a 1.5" diameter. • Adjustment points at both ends of the double socket arm. • Allows for almost infinite adjustment and perfect viewing angles. read+

The RAP-202-153-202 features a round 2.5" diameter base with a Universal AMPs Hole Pattern, a double socket arm, and a 1.5" x 3" rectangular base.   Base Specifications • Round Base: 2.5" diameter with a Universal AMPs Hole Pattern. • Rectangular Base: 1.5" x 3" with four holes featuring a center-to-center pattern of 1" x 2.5".   Material Composition • Construction: The round base and... read+

The RAM Universal Composite Marine Electronic Mount (RAP-111U) is a rugged, fully adjustable mounting solution built for dependable performance on the water. Made from high-strength composite materials, this system includes a C size medium-length double socket arm, a 2" x 1.7" square drill-down base, and a 0.25" x 2" rectangular adapter plate for secure device attachment. The rectangular adapte... read+

The RAP-B-111-A consists of a 2" x 2.5" rectangle base, Short length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal Amps hole pattern. The 6.25" x 2" rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, ... read+

Designed for light duty salt water use, this B size (1”) composite drill-down kit for the Lowrance Eagle 4 & 5 and Hook² allows users to swap out the factory mounting solution with a RAM Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you're ready to connect the double socket arm and round base featuring the Amps hole pattern. Made of high strength composite and po... read+

The RAP-B-101U-LO11 consists of a composite 2.5" diameter round base with the universal Amps hole pattern, composite B size medium length double socket arm, and adapter base that inserts directly to the back of Lowrance Elite-4, Mark-4, and Hook 4 fish finders. The adapter includes a quick release mechanism, allowing you to remove or transfer your fish finder in seconds. Each 1" rubber ball con... read+

The RAP-B-107B-354-TRA1U consists of a Track Ball base, composite double socket arm and connecting Humminbird/Apelco marine adapter base. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm - allowing for high adjustability to achieve perfect viewing angles. This kit is compatible with virtually any track sy... read+

The RAP-B-107U consists of a composite 2.5" diameter round base with the universal AMPs hole pattern, composite double socket arm and connecting Humminbird/Apelco marine adapter base. The mount is designed with the RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; thus allowing for almost infinite adjustment and perfect view... read+

The RAP-B-107-1B-354-TRA1U consists of a Track Ball base, composite double socket arm and connecting Humminbird/Eagle/Lowrance marine base. The mount is designed with the RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm. This allows for high adjustability to achieve perfect viewing angles. This kit is compatible with virtually any tr... read+

The RAP-B-111B-354-TRA1U consists of a Track Ball base, composite double socket arm, and 6.25" x 2" rectangle plate. The 6.25" x 2" rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The Track Ball base can connect to virtually any track system incl... read+

The RAP-B-202-153-354-TRA1U consists of a Track Ball base, composite double socket arm, and 1.5" x 3" rectangular plate.   Mounting and Compatibility • Plate: The rectangular plate contains four holes that will line up with the Humminbird Helix 5. • Connection: The Track Ball will connect to virtually any track system including the RAM Tough-Track. read+

The RAP-B-202-LO11-354-TRA1U consists of a Track Ball base, composite double socket arm and adapter base that inserts directly to the back of Lowrance Elite-4, Mark-4 and Hook 4 fish finders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your fish finder in seconds. A key feature of the mount is a 1" diameter rubber ball and socket system with adjustment po... read+

read+

The RAP-B-101U-G4 consists of a 2.5" diameter round base with the universal Amps hole pattern, double socket arm and round adapter base that attaches directly to the bottom of the Garmin echo and Striker 4 Series. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. This with RAM's rubber ball and socket technolog... read+

The RAP-B-107-1U consists of a composite 2.5" diameter round base with the universal AMPs hole pattern, composite double socket arm and connecting Humminbird/Eagle/Lowrance marine base. The mount is designed with the RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. This allows for almost infinite adjustment and perfect view... read+