Bleed valves

● This trap is made of synthetic materials and is interchangeable with the AIRVENT type because it has fixing holes. It has an anti-siphon pressure valve and is self-contained. ● Suitable for pipe connections with an internal diameter of Ø13, 19, 25 or 32 mm ● Construction Polypropylene Plastic bend and Silicone rubber air valve ● Width 96mm ● Height 133mm   ● Depth 68mm read+

● If the point where the cooling water is injected into the exhaust is less than 15cm above the waterline, then when the engine is stopped, there is a risk that cooling water will siphon into the exhaust system, and subsequently into the engine itself. Such siphoning may be prevented by fitting the Vetus AIRVENTV at least 40cm above the waterline. ● The Vetus AIRVENTV anti-siphon devi... read+

● If the point where the cooling water is injected into the exhaust is less than 15 cm above the waterline, then when the engine stops, there is a risk that the cooling water will seep into the exhaust system. escape and then to the engine. Such a siphon can be prevented by placing the Vetus AIRVENTH at least 40 cm above the waterline. ● The AIRENTH comes complete with a skin fit, hos... read+