RAM Mounts

read+

The RAM-B-174-GA9U consists of a medium length B-size arm with our Motorcycle Brake/Clutch Reservoir & Handlebar Ball Base, and form fitting cradle for several Garmin device. A complete list of compatible devices can be found in the compatibility section below. read+

The RAM-B-174-GA34U is a motorcycle mount designed for the Garmin nuvi 1300 series. It features a double socket arm with a patented rubber ball and socket system. The mount includes a diamond adapter base and a custom high-strength composite cradle. It is compatible with brake and clutch reservoirs as well as rails with diameters ranging from 0.5" to 1.25".   Mounting and Compatibility • D... read+

The RAM-B-174-GA21U consists of a medium length B-size arm with our Motorcycle Brake/Clutch Reservoir & Handlebar Ball Base, and form fitting cradle for Garmin nuvi 300 Series. read+

The RAM-B-177-GA38U consists of a glare shield clamp base, double socket arm and cradle for the Garmin Gpsmap 695/696. Simply locate the clamp on any clamping surface up to 5/8" thick and gently snug the nylon thumb screws. The double ball & socket system will provide perfect viewing angles to get the most from your Garmin Gpsmap. The RAM glare shield clamp with double ball & socket system is f... read+

The RAM-B-174-G1U consists of a medium length B-size arm with our Motorcycle Brake/Clutch Reservoir & Handlebar Ball Base, and our 2.5" diameter round plate with universal Amps Hole pattern and hardware for Garmin Street Pilot III and Gpsmap 172-250. read+

The RAM-B-174-AQ2U is a mounting solution for brake and clutch reservoirs or rails with diameters from 0.5" to 1.25". It features a double socket arm, 2.5" round bases with the universal Amps hole pattern, and a sealed medium-size Aqua BOX.   Mounting and Adjustment • Patented rubber ball and socket system with 1" diameter for almost infinite adjustment and perfect viewing angles. • Includ... read+

The RAM-B-174-GA5U consists of a medium length B-size arm with our Motorcycle Brake/Clutch Reservoir & Handlebar Ball Base, and form fitting cradle for several Garmin device.   Compatibility • A complete list of compatible devices can be found in the compatibility section below. read+

The RAM-B-166-TO2U is a twist lock suction cup mount designed for the TomTom Rider, featuring a 3.3" suction cup locking base, socket system, and connection hardware. This mount utilizes RAM’s patented 1" diameter rubber ball and socket system, which provides almost infinite adjustment and perfect viewing angles. The base attaches easily to your vehicle’s windshield, keeping your handheld devic... read+

The RAM-B-174-TO8U consists of a medium length B-size arm with our Motorcycle Brake/Clutch Reservoir & Handlebar Ball Base, and form fitting cradle for several TomTom device.   Compatibility • Compatible Devices: A complete list of compatible devices can be found in the compatibility section below. read+

This kit includes the form-fitting, high-strength composite RAM EZ-Roll'r cradle for the Spot Gen4 and suction cup mount making it the ideal vehicle GPS mount for Spot Gen4.   Product Features • Form-Fitting Cradle: High-strength composite RAM EZ-Roll'r cradle designed specifically for the Spot Gen4. • Ideal Vehicle Mount: Provides an ideal GPS mounting solution for the Spot Gen4 in vehicl... read+

The RAM-B-174-GA16U consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double socket arm, diamond base adapter and high Strength Composite cradle. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The mount is designed with the RAM 1" diameter patented rubber ball and socket system th... read+

The RAM-B-174-GA35U is a comprehensive mounting solution that includes a double socket arm, mounting hardware for brake and clutch reservoirs and rails, a diamond base adapter, and a custom form-fitted cradle.   Patented Ball and Socket System • Design: The mount features a 1" diameter patented rubber ball and socket system. • Adjustment: Adjustment points at both ends of the socket arm al... read+

The RAM-B-174-G12U consists of a medium length B-size arm with our Motorcycle Brake/Clutch Reservoir & Handlebar Ball Base, and form fitting cradle for several Garmin GPS units.   Compatibility • A complete list of compatible units can be found below in the compatibility section. read+

The RAM-B-166-LO4U is a twist lock suction cup mount designed for the Lowrance AirMap and iWay. It features a 3.3" suction cup locking base, socket system, and connection hardware. The mount utilizes a RAM 1" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. This design allows for almost infinite adjustment and perfect viewing angles. ... read+

The RAM Spine Clip holder is a mount adapter that easily clips into the integrated spine connection on a wide variety of Garmin devices. The RAM Twist-Lock suction cup base is a fan favorite for use on vehicle windshields, and provides an extra strong hold on any smooth, nonporous surface. read+

The RAM-B-174-AQ3U is a mounting solution designed for brake and clutch reservoirs, featuring a double socket arm and a sealed Aqua BOX for device protection.   Mounting and Adjustment • Mounting: Hardware for brake/clutch reservoirs and rails 0.5" to 1.25" in diameter. • Arm: Double socket arm with adjustment points at both ends. • Ball System: RAM 1" diameter patented rubber ball and soc... read+

The RAM-B-166-GA46 consists of a 3.3" suction cup twist lock base, double socket arm and custom high strength composite cradle for Garmin Montana devices. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at b... read+

The RAM-B-166-GA35U consists of a 3.3" suction cup twist lock base, double socket arm and custom high strength composite cradle for Garmin nuvi devices.   Mounting and Surface Compatibility • Suction Cup Base: Designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.   Adjustability and Design • Patented Ball and Socket System: The mount is... read+

The RAM-B-166-GA25U consists of a 3.3" suction cup twist lock base, double socket arm and custom high strength composite cradle for Garmin Nuvi devices. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at bot... read+

The RAM-B-177-GA7U is a mounting solution consisting of a glare shield clamp base, double socket arm, and cradle for the Garmin Gpsmap. Simply locate the clamp on any clamping surface up to 5/8" thick and gently snug the nylon thumb screws. The double ball and socket system will provide perfect viewing angles to get the most from your Garmin Gpsmap. The RAM glare shield clamp with double ball a... read+

The RAM-B-166-GA7U consists of a 3.3" suction cup twist lock base, double socket arm and custom high strength composite cradle for the Garmin Gpsmap. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both e... read+

The RAM-B-166-GA47 is a custom high strength composite cradle for the Garmin Rino 600 series, featuring a double socket arm, 3.3" twist lock suction cup base, and diamond adapter base.   Mounting and Surface Compatibility • Suction Cup Base: The 3.3" twist lock base is designed to provide a strong hold on glass and non-porous plastic surfaces, including adhesive disks.   Adjustability... read+

The RAM-B-166-GA38U consists of a 3.3" suction cup twist lock base, double socket arm and custom high strength composite cradle for Garmin Gpsmap 600 devices. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with the RAM 1" diameter patented rubber ball and socket system that has adjustment point... read+