By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
RAM Universal Drill-Down Locking Vehicle Mount with Ball
468,75€
on request: RAM Universal Drill-Down Locking Vehicle Mount with Ball
It can be more than 30 daysTAX incl.
RAM EZ-On/Off Bicycle Mount
The RAP-274-1U consists of the RAM EZ-ON/OFF dual strap base and swivel diamond adapter. Adjust the zip ties for attachment to a variety of rails, from a minimum of .5" in diameter. With a press of the diamond adapter, the RAM EZ-ON/OFF system allows for the quick release of the diamond adapter from the base. When connected, the diamond base can rotate to your desired position. The hole pattern...
RAM Tele-Pole with 8" & 9" Poles, Single Swing Arm & Large Round Plate
The RAM-VP-SW2-89-240 consists of a 9" lower female Tele-Pole, 8" upper male Tele-Pole, single swing arm and 3.68" round base. The lower female Tele-Pole attaches to all RAM vehicle bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole becomes...
267,50€
on request: RAM Tele-Pole with 8" & 9" Poles, Single Swing Arm & Large Round Plate
It can be more than 30 daysTAX incl.
RAM No-Drill Mount for '19-26 Chevy Silverado, Tahoe & More
This RAM No-Drill mounting system installs quickly and easily into the 2019-2026 Chevrolet Silverado and GMC Next Generation Sierra using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. The round ball ...
480,85€
on request: RAM No-Drill Mount for '19-26 Chevy Silverado, Tahoe & More
It can be more than 30 daysTAX incl.
RAM EZ-On/Off Bicycle Mount with Swivel Base Adapter & Hardware
The RAP-274-1HU consists of the EZ-ON/OFF dual strap base and swivel diamond adapter base. Adjust the zip ties to attach to a variety of rails, from a minimum of 0.5" in diameter. With a press on the diamond adapter, the EZ-ON/OFF system allows for the quick release of the diamond adapter from the base. When connected, the diamond base can rotate to your optimum viewing position.
Compati...
21,95€
on request: RAM EZ-On/Off Bicycle Mount with Swivel Base Adapter & Hardware
It can be more than 30 daysTAX incl.
RAM Tele-Pole with 8" & 9" Poles, Double Swing Arms & Round Plate
The RAM-VP-SW1-89 consists of a 9" lower female Tele-Pole, 8" upper male Tele-Pole, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the k...
280,65€
RAM Tele-Pole with 4" & 7" Poles, Swing Arms & Large Round Plate
The RAM-VP-SW1-47-240 consists of a 7" lower female Tele-Pole, 4" upper male Tele-Pole, double swing arm and 3.68" round base. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole bec...
305,25€
on request: RAM Tele-Pole with 4" & 7" Poles, Swing Arms & Large Round Plate
It can be more than 30 daysTAX incl.
RAM Tele-Pole with 12" & 9" Poles, Double Swing Arms & Round Plate
The RAM-VP-SW1-129 consists of a 9" lower female Tele-Pole, 12" upper male Tele-Pole, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the...
296,50€
on request: RAM Tele-Pole with 12" & 9" Poles, Double Swing Arms & Round Plate
It can be more than 30 daysTAX incl.
RAM Twist-Lock Suction Cup Mount with 6" RAM Flex-Arm
The RAP-105-6D224U consists of a 3.3" suction cup locking base, 6" flex arm and diamond base end. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
36,15€
on request: RAM Twist-Lock Suction Cup Mount with 6" RAM Flex-Arm
It can be more than 30 daysTAX incl.
RAM No-Drill Ball Mount for '15-26 Ford F-150, ’17-26 F-250 + More
The RAM No-Drill Ball Mount for '15-26 Ford F-150, ’17-26 F-250 + More (RAM-VB-195-DB2) installs quickly and easily into a variety of Dodge, Ford, and Jeep vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature with upper and lower poles that allow you to set your mount to the desired height with the simple turn of a knob. ...
418,15€
on request: RAM No-Drill Ball Mount for '15-26 Ford F-150, ’17-26 F-250 + More
It can be more than 30 daysTAX incl.
RAM Tele-Pole with 12" & 18" Poles, Double Swing Arms & Round Plate
The RAM-VP-SW1-1218 consists of a 18" lower female Tele-Pole, 12" upper male Tele-Pole, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once t...
328,60€
on request: RAM Tele-Pole with 12" & 18" Poles, Double Swing Arms & Round Plate
It can be more than 30 daysTAX incl.
RAM No-Drill Mount for '15-22 Chevrolet Colorado + More
This RAM No-Drill mounting system installs quickly and easily into a range of Chevrolet and GMC vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. The round ball base attached to the end of...
750,20€
on request: RAM No-Drill Mount for '15-22 Chevrolet Colorado + More
It can be more than 30 daysTAX incl.
RAM Swivel & Tilt Mount with 4-Hole AMPS Hole Patterns
The RAM Swivel & Tilt Mount with 4-Hole Amps Hole Patterns (RAP-101-PV3U) is a drill-down base that allows users to rotate their devices horizontally 360 degrees and vertically tilt their device to achieve the perfect viewing angle. Easily install any holder with a 4-hole Amps pattern, including but not limited to the GDS Tough-Dock and RAM X-Grip collections. Backed by a lifetime warranty.
71,55€
on request: RAM Swivel & Tilt Mount with 4-Hole AMPS Hole Patterns
It can be more than 30 daysTAX incl.
RAM No-Drill Mount for '99-16 Ford F-250 - F750 + More
This RAM No-Drill mounting system installs quickly and easily into a range of Ford F-Series and Ford Excursion vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. The round ball base attache...
527,10€
on request: RAM No-Drill Mount for '99-16 Ford F-250 - F750 + More
It can be more than 30 daysTAX incl.
RAM Twist-Lock Suction Cup with 4" RAM Flex-Arm & Round Plate
28,35€
on request: RAM Twist-Lock Suction Cup with 4" RAM Flex-Arm & Round Plate
It can be more than 30 daysTAX incl.
RAM Composite Double Ball Mount with Two Round Plates - Short
The RAP-101U-B is a high strength composite flat surface mount consisting of a short double socket arm mount and two 2.5" diameter round bases with the universal Amps hole pattern.
Patented Technology
• Ball and Socket System: Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.
• Infinite Adjustment: Rub...
50,70€
on request: RAM Composite Double Ball Mount with Two Round Plates - Short
It can be more than 30 daysTAX incl.
RAM Flex-Arm Mount with Two Diamond Plates
The RAP-105-6DDU consists of two high strength composite diamond plates separated by a 6" flex arm. The ends are permanently connected to the flex arm ends. The diamond plate will attach to the RAM plastic cradles (HOL series).
RAM No-Drill Universal Mount for Heavy Duty Trucks - Double Swing Arm
The RAM No-Drill mounting base features a heavy-duty steel mounting base custom designed to fit these vehicles perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the base in the vehicle. This configuration provides a telescoping feature with upper and lower poles that allow you to set your mount to the desired height with the simple tur...
718,30€
on request: RAM No-Drill Universal Mount for Heavy Duty Trucks - Double Swing Arm
It can be more than 30 daysTAX incl.
RAM Tele-Pole with 4" & 5" Poles, Swing Arms & Large Round Plate
The RAM-VP-SW1-45-240 consists of a 5" lower female Tele-Pole, 4" upper male Tele-Pole, double swing arm and 3.68" round base. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole bec...
295,20€
on request: RAM Tele-Pole with 4" & 5" Poles, Swing Arms & Large Round Plate
It can be more than 30 daysTAX incl.
RAM Tele-Pole with 8" & 9" Poles, Single Swing Arm & Round Plate
The RAM-VP-SW2-89 consists of a 9" lower female Tele-Pole, 8" upper male Tele-Pole, single swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the k...
254,25€
on request: RAM Tele-Pole with 8" & 9" Poles, Single Swing Arm & Round Plate
It can be more than 30 daysTAX incl.
RAM Tele-Pole with 4" & 7" Poles, Double Swing Arms & Round Plate
The RAM-VP-SW1-47 consists of a 7" lower female Tele-Pole, 4" upper male Tele-Pole, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the k...
291,75€
on request: RAM Tele-Pole with 4" & 7" Poles, Double Swing Arms & Round Plate
It can be more than 30 daysTAX incl.
RAM No-Drill Universal Vehicle Floor Mount with Double Ball Mount
The RAM No-Drill Universal Vehicle Floor Mount with Double Ball Mount (RAM-VB-196-DB2) features a heavy-duty steel mounting base designed to fit a variety of vehicles. Using the front bench or passenger side seat rail bolts as attachment points, secure the base with the existing vehicle hardware. This configuration provides a telescoping feature with upper and lower poles that allow you to set ...
403,60€
on request: RAM No-Drill Universal Vehicle Floor Mount with Double Ball Mount
It can be more than 30 daysTAX incl.
