RAM Mounts

The RAM double swing arm mount includes two 6" long bent swing arms mounted on a vertical surface mounting base. At the end of the device mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360 degree rotation. read+

The RAM-109H-2B-B-LO11 consists of a 6" long straight swing arm mounted on a horizontal surface mounting base. At the free end of the mount swing arm is a C size 1.5" ball. The connection between the swing arm and the base is a bolt pivot point, and the round plate and arm connection is the RAM ball and socket system. The bolt pivoting point allows a complete 360-degree rotation and the ball an... read+

The RAM double swing arm mount includes two 6" long bent swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360 degree rotation.   Mounting and Design • Double Swing Arms: Includes two 6" long bent swing arms mounted on a horizontal surface mounting base. • ... read+

The RAM Fish Finder Mount for Humminbird Devices (RAM-107U) is a complete, drill-down mounting solution. This kit consists of C size components, including a 2.5" diameter round base, medium-length double socket arm, and an adapter base for Humminbird devices, Lowrance Elite, and Raymarine Apelco Fish Finder.   Patented Design • Patented rubber ball for use within the double socket arm syst... read+

The RAM-101-RM1U consists of a 6 inch double socket arm and two 3.68" round bases. The top round base contains pre-drilled holes that connect to Raymarine devices listed below. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect... read+

The RAM-101-RYM1 consists of two 2.5" diameter round bases that contain the universal Amps hole pattern and a 6-inch double socket arm. Included are three #8-32 x 3/4" PH PD Mach Screws and three #8-32 SS Nylock Nuts that connect the mount to the bottom of all Raymarine Dragonfly Sonar/GPS devices. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has ad... read+

The RAM Double Ball Mount for Lowrance Elite-5 & Elite-7 Ti + More (RAM-101-LO11) is a complete, drill-down mounting solution for compact Lowrance fish finders. This kit consists of C size components, including a 2.5" diameter round base, medium-length double socket arm, and adapter inserts directly to the back of Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti², Hook-3, Hook-4, Hook-5, and Mark-5 ... read+

The RAM Double Ball Mount for Lowrance Eagle 4 & 5, Hook² & Reveal 5 (RAM-101-LO12) delivers a secure, highly adjustable mounting solution for Lowrance fish finders on boats, kayaks, and inflatables. Built around the RAM C size 1.5" ball and socket system, this mount replaces factory hardware with a more versatile and adjustable alternative. The included Lowrance-ready adapter snaps directly on... read+

The RAM-101-G2U consists of a 6 inch double socket arm and two 2.5" diameter round bases with the universal Amps hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the RAM-101-G2U mount to your optimum viewing position. Compatible with Garmin mari... read+

This version of the spring-loaded RAM Quick-Grip holder provides a secure fit for a variety of regular size phones and other devices. The adjustable side keepers ensure that devices like GPS units and Bluetooth speakers within the listed compatible dimensions will also fit in the holder. Included is a short RAM double socket arm and zinc-coated handlebar U-Bolt base that accommodates rails from... read+

The RAM Spine Clip Garmin Mount with Medium Torque Base (RAM-B-408-75-1-GA76U) is a rugged, quick-install kit designed to secure Garmin devices to rails.   Compatibility and Installation • The Garmin spine adapter easily clips into the integrated spine connection on a wide variety of Garmin devices, see compatibility tab for full list. • The RAM Torque mounting base is compatible... read+

The RAP-SB-187-GA48 consists of the RAM EZ-Strap base, double ball Short arm, diamond adapter base and high strength composite cradle.   Compatibility • Strap: Can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter.   Adjustability • Multiple adjustment points allow you to move the mount to your optimum viewing position. • Rotation: This mount rotat... read+

The RAP-SB-187-GA36 consists of the RAM EZ-Strap base, double ball Short arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees.   Features • Base: RAM EZ-Strap ba... read+

The RAP-SB-187-GA14 consists of the RAM EZ-Strap base, double ball Short arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees. read+

The RAP-SB-180-MA14 consists of the Lil Buddy adhesive stick base and custom high strength composite cradle for the Magellan eXplorist 510, 610 and 710. Using an adhesive disk, put the Lil Buddy practically anywhere you want to keep your eXplorist easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. This mount rotates 1... read+

The RAP-SB-180-GA35 consists of the Lil Buddy adhesive stick base and high strength composite cradle. Using an adhesive disk, you can place the Lil Buddy practically anywhere to keep your nuvi easy to see and always within your reach. Designed with a very small footprint, it is easy to find a home on your dash or console. This mount rotates 180 degrees. The RAM Lil Buddy is far and away the mos... read+

The RAM peel and stick mount includes a composite, flex adhesive base and custom form-fit cradle for the Magellan eXplorist GC/110/310/350H series. Simply peel off the adhesive back and stick the mount where it will work best for you. The RAM peel and stick mount is far and away the most discrete and clean way to mount most any compact electronic device to the dash of your vehicle.   Insta... read+

The RAP-B-378-GA31 consists of a 2.5" flex adhesive base, double socket arm, diamond adapter base, and high-strength composite cradle. Using the included PSA stick pad, you can mount the flex adhesive mount practically anywhere to keep your handheld device easy to see and always within your reach. Designed with a very small footprint, it is easy to find a home on your scooter, motorcycle, kayak... read+

If you are looking for a mounting solution that is fast, simple, and won't mark up your handle bar, this is it. Don't waste your time looking for something better because this is the best. The RAM EZ-Strap installs in seconds and grips tubing, square rails and irregular shapes like a Python. This mount is ideally suited for smaller electronic devices like the Garmin nuvi and other similar devic... read+

The RAP-SB-187-GA41 consists of the RAM EZ-Strap base, double ball Short arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees. read+

The RAP-SB-187-GA20 consists of the RAM EZ-Strap base, double ball Short arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees. read+

Upgrade your in-vehicle Garmin mount with this RAM Twist-Lock Suction Cup mounting kit, made specifically for Garmin GPS factory mounting brackets that accommodate the Garmin "G-Ball" and are compatible with a 17mm ball. This kit consists of a 3.3" diameter RAM Twist-Lock suction cup, the RAM Snap-Link Socket with Angled Diamond Plate, and the 3" Long RAM Snap-Link Ball Adapter. Pair this kit w... read+