By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Raymarine White replacement housing for FLIR MD series cameras
White replacement housing for FLIR MD-series thermal cameras, suitable for replacing the camera's original outer cover.White replacement housing for FLIR MD-series thermal cameras. This component is designed to replace the original outer part when it has deteriorated, been lost, or needs replacement during a maintenance procedure.
Raymarine SeaTalk NG Extension Cable
The SeaTalk NG Backbone extender is used for linking together blue SeaTalk NG Backbone Cables. Create a long cable from 2 shorter ones, or, use it to plug in a network terminator at the far end of a backbone cable where no other connections exist.
SeaTalk NG Backbone Extender
• Used to connect 2 backbone cables together.
Raymarine SeaTalk NG backbone terminator
The SeaTalk NG Backbone Terminators are installed at each physical end of the overall backbone. They improve signal quality and prevent interference on the network. Two terminators are required per system.
SeaTalk NG Backbone Terminator
• To be used at the end of SeaTalk backbone, two are required per system.
Raymarine SeaTalk NG blanking plug
SeaTalk NG blanking plugs are used to weatherproof unused white spur connections. The black rubber plug locks into open ports on T-Connectors, 5-way connectors, instruments, displays and more. Blanking Plugs (black) should not be confused for Backbone Terminators (blue) and are not interchangeable.
SeaTalk NG Blanking Plug
• Used to cover unused spur connections in 5–way blocks, T-piece ...
Raymarine SeaTalk NG backbone cable (1 m)
In a SeaTalk NG network installation, backbone cables run the length of the boat carrying both data and power to connected sensors and instruments. Backbone cables are available in pre-made 400mm, 1m, 3m, 5m, 9m and 20m lengths. Backbone cables plug into the blue backbone terminals on T-connectors, 5-way connectors and other network devices. You can also use a backbone cable joiner, A06030, to ...
Raymarine SeaTalk NG backbone cable (3 m)
In a SeaTalk NG network installation, backbone cables run the length of the boat carrying both data and power to connected sensors and instruments. Backbone cables are available in pre-made 400mm, 1m, 3m, 5m, 9m and 20m lengths. Backbone cables plug into the blue backbone terminals on T-connectors, 5-way connectors and other network devices. You can also use a backbone cable joiner, A06030, to ...
Raymarine SeaTalk NG backbone cable (5 m)
In a SeaTalk NG network installation, backbone cables run the length of the boat carrying both data and power to connected sensors and instruments. Backbone cables are available in pre-made 400mm, 1m, 3m, 5m, 9m and 20m lengths. Backbone cables plug into the blue backbone terminals on T-connectors, 5-way connectors and other network devices. You can also use a backbone cable joiner, A06030, to ...
Raymarine SeaTalk NG backbone cable (20 m)
In a SeaTalk NG network installation, backbone cables run the length of the boat carrying both data and power to connected sensors and instruments. Backbone cables are available in pre-made 400mm, 1m, 3m, 5m, 9m and 20m lengths. Backbone cables plug into the blue backbone terminals on T-connectors, 5-way connectors and other network devices. You can also use a backbone cable joiner, A06030, to ...
Raymarine SeaTalk NG spur cable (40 cm)
SeaTalk NG Spur cables are used to join individual instruments, sensors or displays to the backbone. The white connectors on each cable fit into white spur connectors found in backbone T-connectors and 5-way connectors and provide a secure, waterproof connection. Spur cables are available in 400mm, 1m, 3m, 5m and 6m lengths to reach from your device to the nearest spur connection in the backbon...
Raymarine SeaTalk NG spur cable (1 m)
SeaTalk NG Spur cables are used to join individual instruments, sensors or displays to the backbone. The white connectors on each cable fit into white spur connectors found in backbone T-connectors and 5-way connectors and provide a secure, waterproof connection. Spur cables are available in 400mm, 1m, 3m, 5m and 6m lengths to reach from your device to the nearest spur connection in the backbon...
Raymarine SeaTalk NG spur cable (3 m)
SeaTalk NG Spur cables are used to join individual instruments, sensors or displays to the backbone. The white connectors on each cable fit into white spur connectors found in backbone T-connectors and 5-way connectors and provide a secure, waterproof connection. Spur cables are available in 400mm, 1m, 3m, 5m and 6m lengths to reach from your device to the nearest spur connection in the backbon...
Raymarine SeaTalk NG spur cable (5 m)
SeaTalk NG Spur cables are used to join individual instruments, sensors or displays to the backbone. The white connectors on each cable fit into white spur connectors found in backbone T-connectors and 5-way connectors and provide a secure, waterproof connection. Spur cables are available in 400mm, 1m, 3m, 5m and 6m lengths to reach from your device to the nearest spur connection in the backbon...
Raymarine SeaTalk NG spur cable with elbow, 40cm
SeaTalk NG Elbow spur cables are perfect for use in confined or shallow spaces where a straight spur cable will not fit. Elbow spurs are available in two options: a right angled to right angled (400mm) option, or as right angled to straight spur (1m) option.
Elbow to Elbow Spur Cable 400mm
• Cable length: 400mm (15.7")
Raymarine Spur cable to bare wires, 1 metre
SeaTalk NG spur female to stripped-end spur cables connect compatible products that do not have a SeaTalk NG connector such as transducer pods. These are available in 1m or 3m lengths only. These specialty cables contain 5 cores - the Yellow SeaTalk 1 core is not included.
Spur to Stripped End Cable 1m
• Cable length: 1m (3.25')
Raymarine Spur cable to bare wires (3 m)
SeaTalk NG spur female to stripped-end spur cables connect compatible products that do not have a SeaTalk NG connector such as transducer pods. These are available in 1m or 3m lengths only. These specialty cables contain 5 cores - the Yellow SeaTalk 1 core is not included.
Spur to Stripped End Cable 3m
• Cable length: 3m (9.75')
Raymarine DeviceNet Adapter (female) - SeaTalkNG, 40 cm.
Used to connect NMEA 2000-compatible devices to Raymarine's SeaTalk NG backbone. The metal, threaded DeviceNet connector attaches securely to the NMEA 2000 connection, while the white spur connector plugs into a SeaTalk NG spur connection. Available in 120mm, 400mm and 1m length options.
NMEA2000 (DeviceNet) Female to SeaTalk NG Spur Female Adaptor Cable (400mm)
• Cable length: 400mm (15...
Raymarine SeaTalk (3-pin) to SeaTalkNG Adapter
The adapter cable allows SeaTalk 1 information to flow through a bridging device that translates older SeaTalk protocol to modern SeaTalk NG and NMEA 2000 information. This adapter is specifically used with ST70-series color instruments, or the E22158 SeaTalk to SeaTalk NG converter only. Available in 400mm or 1m lengths.
SeaTalk 1 to SeaTalkNG Spur Female Adaptor Cable (400mm)
• Cable l...
Raymarine SeaTalk2 (5p) to SeaTalkNG Adapter
SeaTalk 2 was the cabling predecessor to SeaTalk NG that utilized NMEA 2000 data. SeaTalk 2 was commonly found on ST290 sailing instruments as well as C-Series and E-Series Classic multifunction displays. This adapter cable allows those devices to plug into the SeaTalk NG backbone and interact with newer sensors, instruments and devices.
ST2 Adapter Cable (5 Pin)
• Cable length: 400mm (1...
Raymarine SeaTalk NG power cable
A cable to connect a SeaTalk NG backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. Available in straight and right angle options.
SeaTalk NG Power Cable (Straight)
• 1 x 2m (6.56ft) Power Cabl...
Raymarine Series E Adapter - SeaTalk NG, 1.5 metres
E-Series Adapter - SeaTalk NG, 1.5 metres
Raymarine SeaTalk NG 5-way connector
The SeaTalk NG 5-Way connector creates up to 3 white spur connections in 1 location for connecting SeaTalk NG devices to the backbone. Dual blue ports connect to backbone cables allowing the network to pass-through to other locations on the boat, or accept network terminators to complete the circuit.
5 Way Connector
• Each connector block allows for the connection of up to 3 SeaTalk NG d...
Raymarine SeaTalk NG backbone cable (9 m)
In a SeaTalk NG network installation, backbone cables run the length of the boat carrying both data and power to connected sensors and instruments. Backbone cables are available in pre-made 400mm, 1m, 3m, 5m, 9m and 20m lengths. Backbone cables plug into the blue backbone terminals on T-connectors, 5-way connectors and other network devices. You can also use a backbone cable joiner, A06030, to ...
Raymarine SeaTalk NG angled to Power cable, bare wires, 2 metres
A cable to connect a SeaTalk NG backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. Available in straight and right angle options.
SeaTalk NG Power Cable (Straight)
• 1 x 2m (6.56ft) Power Cabl...
Raymarine SeaTalk NG to NMEA0183 interconnection cable, 2 cables, 1 metre
SeaTalk NG to NMEA0183 interconnection cable, 2 cables, 1 metre. Data conversion also requires the NGW-1-STNG gateway.



























