By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Raymarine Spur cable for active GPS antenna
SeaTalk NG Spur cables are used to join individual instruments, sensors or displays to the backbone. The white connectors on each cable fit into white spur connectors found in backbone T-connectors and 5-way connectors and provide a secure, waterproof connection. Spur cables are available in 400mm, 1m, 3m, 5m and 6m lengths to reach from your device to the nearest spur connection in the backbon...
Raymarine SeaTalk (3-pin) to SeaTalk NG adapter cable, 1 metre
The adapter cable allows SeaTalk 1 information to flow through a bridging device that translates older SeaTalk protocol to modern SeaTalk NG and NMEA 2000 information. This adapter is specifically used with ST70-series color instruments, or the E22158 SeaTalk to SeaTalk NG converter only. Available in 400mm or 1m lengths.
SeaTalk 1 to SeaTalkNG Spur Female Adaptor Cable (1m)
• Cable leng...
Raymarine SeaTalk NG Terminator for Raystar 130 GPS antenna
The SeaTalk NG in-line terminator is a combined device that provides a single spur connection and backbone termination. It is typically used when connecting a device such as a GPS sensor at the end of a backbone, and it is inconvenient or impossible to fit a standard terminator and a T-piece connector.
Two terminators are required per system.
Raymarine Micro C to DeviceNet adapter cable, female, 1 metre
Used to connect NMEA 2000-compatible devices to Raymarine's SeaTalk NG backbone. The metal, threaded DeviceNet connector attaches securely to the NMEA 2000 connection, while the white spur connector plugs into a SeaTalk NG spur connection. Available in 120mm, 400mm and 1m length options.
NMEA2000 (DeviceNet) Female to SeaTalk NG Spur Female Adaptor Cable (1m)
• Cable length: 1.0m (39.4')
Raymarine Micro C to DeviceNet adapter cable, male, 1 metre
Adapts Raymarine SeaTalk NG instruments and displays to work on a NMEA 2000 DeviceNet network. Plug the white SeaTalk NG spur cable into the socket on your Raymarine instrument, autopilot controller or display. The metal, threaded DeviceNet connector is ready to accept a standard NMEA 2000 DeviceNet drop cable to plug into a NMEA 2000 backbone. Available in 120mm, 1m and 1.5m lengths.
NM...
Raymarine SeaTalk NG to SeaTalk NG adapter, angled
SeaTalk NG to SeaTalk NG adapter, angled
Raymarine STNG spur cable, right-angle to straight STNG, 1 metre
SeaTalk NG Elbow spur cables are perfect for use in confined or shallow spaces where a straight spur cable will not fit. Elbow spurs are available in two options: a right angled to right angled (400mm) option, or as right angled to straight spur (1m) option.
Elbow to Straight Spur Cable 1m
• Cable length: 1m (3.25')
Raymarine DeviceNet female to STNG male straight adapter
Spur adapters are used to switch between SeaTalk NG and NMEA 2000 DeviceNet cabling, right at the back of a device or at the end of a cable. This makes integrating Raymarine and non-Raymarine components easier no matter which cabling system you are using on your boat.
NMEA2000 (DeviceNet) Female to SeaTalk NG Male Straight Adaptor
• SeaTalkng (male) to DeviceNet (female) adaptor
Raymarine STNG female to DeviceNet male straight adapter
Spur adapters are used to switch between SeaTalk NG and NMEA 2000 DeviceNet cabling, right at the back of a device or at the end of a cable. This makes integrating Raymarine and non-Raymarine components easier no matter which cabling system you are using on your boat.
SeaTalk NG Female to NMEA2000 (DeviceNet) Male Straight Adaptor
• SeaTalkng (female) to DeviceNet (male) adaptor
Raymarine STNG female to DeviceNet male right-angle adapter
Spur adapters are used to switch between SeaTalk NG and NMEA 2000 DeviceNet cabling, right at the back of a device or at the end of a cable. This makes integrating Raymarine and non-Raymarine components easier no matter which cabling system you are using on your boat.
NMEA2000 (DeviceNet) Female to SeaTalk NG Male Right Angle Adaptor
• SeaTalkng (male) to DeviceNet (female) elbow (right ...
Raymarine B164-12 50/200 depth and temperature transducer for DSM300/CP370
Bronze, 1 kW Dual Frequency (50/200 kHz) Transducer with Tilted Element Technology for CP370 Sonar
B164 12° Tilted Element Transducer
• Deadrise Angles: 8 - 15°
• 12° Offset
Specifications
General Specifications
• Mount: Through-Hull
• Material: Bronze
• Power (RMS): 1kW
• Max Depth: 1,800 Ft. (L) / 800 Ft. (H)
• Frequency: 50 / 200 kHz
• Beam Width: 22° / 6°
• Records: Depth / Te...
Raymarine B164-20 50/200 depth and temperature transducer for DSM300/CP370
Bronze, 1 kW Dual Frequency (50/200 kHz) Transducer with Tilted Element Technology for CP370 Sonar
B164 20° Tilted Element Transducer
• Deadrise Angles: 16 - 24°
• 20° Offset
Specifications
General Specifications
• Mount: Through-Hull
• Material: Bronze
• Power (RMS): 1kW
• Max Depth: 1,800 Ft. (L) / 800 Ft. (H)
• Frequency: 50 / 200 kHz
• Beam Width: 22° / 6°
• Records: Depth / T...
Raymarine B164 transducer w/o tilted element or fairing block for DSM300/CP370
Bronze, 1 kW Dual Frequency (50/200 kHz) Transducer with Tilted Element Technology for CP370 Sonar
B164 0° Tilted Element Transducer
• Deadrise Angles: 0 - 7°
• 0° Offset
Specifications
General Specifications
• Mount: Through-Hull
• Material: Bronze
• Power (RMS): 1kW
• Max Depth: 1,800 Ft. (L) / 800 Ft. (H)
• Frequency: 50 / 200 kHz
• Beam Width: 22° / 6°
• Records: Depth / Tempe...
Raymarine 'Y' cable for 1kW CHIRP transducers
Adapter cable for pairing individual transducers to a CHIRP sounder module (CP470/CP570/Axiom Pro RVX). Length 0.5 m. 11-pin.
Raymarine Cable Extension for CHIRP/CP470/CP570 Transducers, 3 metres
Cable extension for CHIRP/CP470/CP570 transducers, 3 metresRaymarine transducer to CHIRP sounder module cable extension, 3 metres
Raymarine Cable Extension for CHIRP/CP470/CP570 Transducers, 5 metres
Cable extension for CHIRP/CP470/CP570 transducers, 5 metresCable extension from Raymarine transducer to CHIRP sounder module, 5 metres
Raymarine Top Cover for ST1000 Plus Tiller Pilot
Upper housing spare part for ST1000 Plus tiller pilot.
Raymarine Lower housing for ST1000 Plus tiller pilot
Lower housing for ST1000 Plus tiller pilot
Raymarine Power cable for ST4000 MKII wheel pilots
Power cable for ST4000 MKII wheel pilots
Raymarine ST4000 MKII autopilot front cover
Front cover for ST4000 MKII autopilotFront cover for ST4000 MKII wheel pilot
Raymarine Rear Cover for ST4000 MKII Wheel Pilot
Rear cover for Raymarine ST4000 MKII wheel pilot.
Raymarine ST4000 MKII drive ring
ST4000 MKII drive unit ring
Raymarine Wheel Pilot Clutch Lever ST4000 MKII
Lever for Raymarine ST4000 MKII wheel pilot.
Raymarine Pedestal bracket for ST4000 MK2
Pedestal bracket for ST4000 MK2



























