By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
- Description
- Reviews (0)
Product description
The VHF Ray90 radio is a black-box, sleek and modular system that allows discreet installation and saves space on the panel. This set includes the black-box transceiver, the remote passive speaker with its cable and the Class B AIS700 transceiver.
Box contents
- VHF radio base station with DSC Ray90 / Ray91 (includes the installed power and data cable).
- Handset cover with cable.
- Handset with cable.
- Handset adapter cable with RCA Audio, 400 mm (1.3 ft).
- Passive speaker and bezel.
- Mounting gasket for passive speaker.
- 4 M4x25 screws (for mounting the speaker with cable).
- 4 M4x25 screws (for mounting the base station).
- 6 M4x12 screws (for mounting the handset hook and cover).
- 1 m (3.28 ft) DeviceNet to SeaTalkng adapter cable.
- Handset hook.
- Panel cable pass-through plate.
- Gasket for panel cable pass-through plate.
- Mounting nut for panel cable pass-through plate.
- 3 mounting screws for panel cable pass-through plate.
- Protective cap for panel cable pass-through plate mounting.
- Documentation.
Specifications
Electrical specifications
- Nominal supply voltage: 12 V DC (overvoltage protection).
- Operating voltage range: From 10.2 V DC to 16 V DC.
- Fuse requirements: in-line fuse = 10 A; thermal switch = 7 A.
- Power consumption: less than 6 A at high power (13.6 V); standby mode: 600 mA; receive: 2 A; megaphone: 3 A (8 Ω) / 6 A (4 Ω).
- LEN: 1.
Environmental specifications
- Operating temperature: From -25 ºC (-13 ºF) to +55 ºC (131 ºF).
- Storage temperature: From -25 ºC (-13 ºF) to +70 ºC (158 ºF).
- Relative humidity: 95 %.
- Waterproofing: IPx6 and IPx7.
Connections
- Handsets with cable: 2, via the HS1 and HS2 connectors.
- Wireless hub: 1, via hub connector.
- GNSS antenna (GPS): 1, via GPS connector (TNC).
- VHF antenna / antenna splitter: 1, via VHF connector (50 Ohm SO239).
- NMEA 0183 input: 1, via data cable with bare terminal.
- NMEA 0183 output: 1, via data cable with bare terminal.
- NMEA 2000 / SeaTalkng: 1 via N2K connector (DeviceNet).
- Megaphone: 1, via data cable with bare terminal.
VHF transmitter
- Channels: all available US, international and Canadian VHF marine bands.
- Frequency range: From 156.025 MHz to 157.425 MHz / From 155.500 MHz to 161.425 MHz (private channels).
- Frequency stability: +/- 1.5 ppm.
- Channel separation: 25 kHz.
- Output power: low power setting — 1 W; high power setting — 25 W.
- Spurious emissions: better than –36 dBm at 25 W (less than 0.25 μW).
- Maximum deviation: +/- 5 KHz.
- Antenna impedance: 50 ohms (typical).
Receiver
- Receiver type: double conversion superheterodyne.
- Channels: all available US, international and Canadian VHF marine bands.
- Frequency range: From 156.050 MHz to 163.275 MHz / From 155.500 MHz to 161.425 MHz (private channels).
- Sensitivity: better than 1 microvolt EMF @ 20 dB SINAD.
- Squelch sensitivity: less than -2 dBμ EMF.
- Hum and noise: better than -40 dB.
- Audio distortion: less than 10 %.
- Receiver sensitivity: distance — 119 dBm (0.25 uV) @ 12 dB SINAD (typical); local — 110 dBm (0.7 uV) @ 12 dB SINAD (typical).
- Adjacent channel selectivity: more than 70 dB.
- Spurious response rejection: more than 70 dB.
- Intermodulation rejection: more than 68 dB.
GNSS (GPS)
- Channels: 72.
- Cold start: 29 seconds.
- Receiver integrated circuit sensitivity: tracking and navigation = -167 dBm; reacquisition = -160 dBm; cold start = -146 dBm; hot start = -156 dBm.
- GNSS compatibility: GPS; GLONASS; Beidou.
- SBAS compatibility: QZSS; WAAS; EGNOS; MSAS; GAGAN.
- Special features: active jamming and interference reduction.
- Operating frequency: GPS L1 C/A; GLONASS L10F; Beidou B1.
- Signal acquisition: automatic.
- Almanac update: automatic.
- Geodetic datum: WGS-84 (alternatives available via the Raymarine MFD).
- Update rate: 20 Hz (20 times per second, simultaneous GNSS).
- Antenna: external — an external passive antenna is required.
- Horizontal position accuracy: autonomous = 2.5 m (8.2 ft); SBAS = 2 m (6.56 ft).
AIS (Ray91 only)
- Class type: receiver only.
Be the first to leave your opinion
0/55 stars
0%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%
Write your opinion about this product
No comments yet, will you be the first to leave one?Your opinion matters!
More related products










