How it works
It converts and regulates the power from the solar panels to carry out safe and efficient charging. MPPT tracking adjusts operation to the available maximum power point, while the OPTICHARGE algorithm applies the appropriate curve to the selected battery type.
It can work with two solar panels on separate inputs. It also has an output dedicated to the starter battery, to which it can supply up to 5 A when the service battery is sufficiently charged.
Control and connectivity
The N-BUS connection allows the regulator to be integrated with equipment and displays compatible with the vehicle's electrical system. This version includes Bluetooth to consult and control the regulator from the compatible mobile app.
Compatible batteries
- Lead-acid.
- Gel.
- AGM.
- Lithium LiFePO4.
The minimum capacity indicated for the service battery is 60 Ah for lead and 40 Ah for LiFePO4. Selection of the charging curve is carried out via the device settings.
Main protections
It includes protection against high and low voltages, excess temperature, current return, short circuit and reverse polarity in the service battery connection. It accepts an optional temperature sensor to adapt charging and apply thermal protection functions.
Main technical data
| Feature |
Value |
| Total solar power |
Up to 320 W |
| Number of solar inputs |
2 |
| Maximum input voltage |
29.5 V |
| Battery system |
12 V |
| Charge current to service battery |
20 A |
| Charge current to starter battery |
5 A |
| Maximum standby consumption |
2 mA |
| Operating temperature |
From -20 to 50 °C |
| Product dimensions |
90 × 48 × 151 mm (width × height × depth) |
| Net weight |
0.30 kg |
Contents
Solar regulator, fuse, mounting screws and installation and use documentation.