Seachoice

● Provides easy access to your accessory inputs using a USB port or 3.5 mm jack. ● It has a waterproof panel with rubber cap and 2 m of cable ● Easily installable in 3.5 cm holes and panels up to 2.5 cm thick Read more »

● Made of stainless steel. ● The buttonhole must be permanently attached to the line of defense. ● Sold by pairs ● Measures:        - Diameter: 9.5 mm        - Screws: # 8 Read more »

● Premium double braided cable with gasket.● Thickness: 9mm● Length: 1.8 m Read more »

● Zinc plated steel anchor lift and nylon pulley system. Zinc plated steel sleeve controls anchor from any position. ● Accommodates 1/4" to 7/16" diameter line (6.3 to 11.1 mm) ● Supports anchors up to 20 lbs ( 9 kg)   Read more »

● Extremely strong rope with 10" eye splice. ● Designed to absorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline and, marine growth. ● Grosor: 9.5 mm  Read more »

● Extremely strong rope with 10" eye splice. ● Designed to absorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline and, marine growth. ● Grosor: 13 mm  Read more »

● Extremely strong rope with 10" eye splice. ● Designed to absorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline and, marine growth. ● Grosor: 16 mm  Read more »

● Extremely strong rope with 10" eye splice. ● Designed to absorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline and, marine growth. ● Grosor: 19 mm  Read more »

● Hot galvanized lead chain for anchors, fitted with 2 shackles (one at each end) hot galvanized. Grade 30     Ref Size Shackle Work Load Break Strength Boat Size Length 50-44101 4.75 mm 6.35 mm 320 kg 1360 kg 3 - 4.5 m 1.2 m 50-44121 6.35 mm 7.9 mm 567 kg 2268 kg 4.5 - 9.75 m 1.2 m 50-44141 7.9 mm 9.5 mm 850 kg 3400 kg 7.9 - 12.2 m 1.5 m Read more »

● Per ABYC "Safety Standards for Small Craft" Molded plastic with broad flange. Not recommended for use below the waterline Ref. Hose Flange Max Hull Thickness 50-18051  19.1 mm 38 mm 32 mm 50-18071 25.4 mm 47.6 mm 32 mm Read more »

● Can be used for plumbing or aerator systems.  ● Made of white high impact plastic for corrosion resistance ● Hose: 19 mm Read more »

● High impact fiberglass reinforced in a white plastic ring with flange and rubber gasket. ● For boats with self-locking cabin ● Mounts above the water line ● Designed to retrofit the Seachoice Self draining scupper ● Screw screw dimensions: 4 cm ● External diameter: 72 mm ● Internal diameter: 45 mm Read more »

●  This easy-to-clean salted water pump has a water cooled engine and complies with ISO8849 ●  Cables tinned in a sealed construction ●  12 V ●  Power consumption: 2.5 A ●  Fuses: 5A ●  Flow: 1890 l / h ●  Ports: 3/4 "(19 mm) Read more »

● Ideal for shrinking water in small areas such as small boats, pneumatic, PVCs, etc ... ● Made of white plastic ABS easy to clean ● Dimensions (WxHxD): 7.6 x 10 cm ● 12 V ● Consumption: 1.5 A ● Fuses: 3A ● Flow: 1700 l / h ● Ports: 3/4 "(19 mm) Read more »

● Removable housing for easy cleaning. Totally submersible. Protection against air bubbles. Protected ignition. Marine grade wiring. ● Meets ABYC and USCG requirements ● 12 V ● Consumption: 2 A ● Fuses: 5A ● Flow: 2270 l / h ● Ports: 3/4 "(19 mm) Read more »

● Turn any bilge pump to automatic. ● Made of non-corrosive ABS material ● Activation ball. ● Size: 11.4 x 7.6 x 6.3 cm ● Volts: 12 ● Amps: 15 Read more »

● Made of stainless steel. Weldless, seamless construction ● Exceeds all SAE requirements ● Includes 4 units (2 pieces of each size) ● Dimensions:               - 5.5 to 15.9 mm               - 11.1 to 19.8 mm Read more »