By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.
Ahead! We were waiting for you.
Inox Flush Skin Fittings with Ground Connections
- Fitted with ground connection.
Ref.: Thread C D Ø 1752500 3/8" 53 mm 25 mm 11 mm 1752501 1/2" 60 mm 38 mm 15 mm 1752502 3/4" 68 mm 50 mm 19 mm 1752503 1" 72 mm 55 mm 25 mm 1752504 1" 1/4 77 mm 65 mm 34 mm 1752505 1" 1/2 78 mm 72 mm 38 mm
Stainless steel drainage grate
● Made of mirror-polished AISI 316 stainless steel. Snap upper grid for mounting and hiding the fastening screws. Code A (mm) B (mm) C (mm) D (inside thread) 1711849 58 50 38 1" 1711850 80 50 50 1" 1/2
45 degrees cockpit drain with check valve
● Made of AISI 316 stainless steel; fitted with non-return system thanks to an inner ball that blocks any possible backflow; removable grid for cleaning. ● Diameter: 92 mm ● Hose adaptor: 40 mm
Oval cockpit drain stainless steel
● Made of AISI 316 stainless steel; fitted with removable grid
● Diameter: 92x190 mm
● Hose adaptor: 38 mm
90 degrees cockpit drain stainless steel
● Made of AISI 316 stainless steel. The upper part is screwed thus allowing mounting on different gauges. ● Fixing hole: 32 mm ● Hose connector: 20 mm ● Deck thickness: 3/11 mm ● Head Ø: 20 mm
Thru-Hull drain with grating
● Thru-Hull drain with grating in nylon
● Size 1”1/2
● Thread Ø 47 mm
● Hose adaptor 32/38 mm
● Length 117 mm
Thru-Hull drain with grating elbow
● Thru-Hull drain with grating elbow in nylon Code Flange Ø A (mm) Ø Application hole C (mm) Ø Hose adaptor D (mm) Size Max E (mm) 1739990 45 25 19 60 1763220 70 50 29 80 1741180 70 50 38 80
Vertical stainless steel thru-hull
● Made of precision-cast mirror polished AISI 316 stainless steel Code Size (inches) Thread length (mm) Dimensions (mm) 1711901 1/2" 65 38x38x18 1711902 3/4" 65 44x44x20 1711903 1" 75 50x50x23 1711904 1" 1/4 79 57x57x27 1711905 1" 1/2 83 65x65x31 1711906 2" 90 80x80x44
Horizontal nylon thru-hull check valve
● Fitted with check valve made of white nylon , large passage flow, made in accordance with EC standards Code Fits thickness Net passage Mounting Required hole 1732050 From mm 30 up to 139 Ø mm 50 equal to 1960 mm2 pressure mounting Ø mm 66
Stainless Steel AISI 316 Scuppers
Made of precision-cast mirror polished AISI 316 stainless steel Size Length of threaded neck mm Dimensions mm 1/2" 65 38 x 38 x 18 3/4" 65 44 x 44 x 20 1" 75 50 x 50 x 23 1" 1/4 79 57 x 57 x 27 1" 1/2 83 65 x 65 x 31 2" 90 80 x 80 x 44
Seachoice Self draining scupper
● Seals and drains automatically autovaciantes bathtubs. ● Made of polycarbonate, with a sealing gasket PVC and polyethylene solid ball. ● Compatible with opening 19-38 mm ● Eyelet 4 mm ● Designed for retro adjustment to the Seachoice Scupper Valve
Seachoice Gas Tank Vent
● Chrome plated zinc vent with removable wire screen flame arrester ● Meets USCG safety standards ● Hose: 5/8" ● Max Hull Thickness: 3/4"
Seachoice Thru Hull Vent 90 Degree
● Made of brass with a highly polished chrome plated finish. ● Two vent holes. Monel fire screen ● Hose: 5/8" or 9/16" ● Max Hull Thickness: 1/2"
Seachoice Thru Hull 90 Degrees
● Two nut application. ● High impact white plastic ● Designed for places where hose is difficult to route ● Great for livewells on bass boats ● Not recommended for use below the waterline Ref. Hose Flange Max Hull Thickness 50-18131 19 mm 38 mm 19 mm 50-18141 28.5 mm 47.6 mm 28.5 mm
Seachoice Thru Hull Connector with Broad Flange
● Per ABYC "Safety Standards for Small Craft" Molded plastic with broad flange. Not recommended for use below the waterline Ref. Hose Flange Max Hull Thickness 50-18051 19.1 mm 38 mm 32 mm 50-18071 25.4 mm 47.6 mm 32 mm
Seachoice Extralong Thru Hull Connector
● Extra long molded high impact white plastic with broad flange. Desined for installation where thick transoms or side walls require up to 63 mm long thread ● Not recommended for use below the waterline Ref. Hose Flange Max Hull Thickness 50-18161 19.1 mm 44 mm 63 mm
Seachoice 90º Elbow
● Can be used for plumbing or aerator systems. ● Made of white high impact plastic for corrosion resistance ● Hose: 19 mm
Seachoice Scupper Valve
● High impact fiberglass reinforced in a white plastic ring with flange and rubber gasket. ● For boats with self-locking cabin ● Mounts above the water line ● Designed to retrofit the Seachoice Self draining scupper ● Screw screw dimensions: 4 cm ● External diameter: 72 mm ● Internal diameter: 45 mm
Attwood Scupper Valve
It is installed on the transom slightly above the waterline to facilitate water drainage in self-bailing cockpits. The safety valve opens outward to allow water to drain when necessary and closes to prevent water from entering. • Made of acetal. • External diameter: 71 mm • Internal diameter: 50 mm • Distance between screws: 45 mm Important: the through-hull fittin...
Attwood Thru-Hull with Strainer
● Thru-hull connector with strainer prevents clogging of the aerator pump. Strainer attaches to threads that extend beyond external retaining nut. Acetal construction. ● Caution: Do not use strainer as a thru-hull connector nut replacement. Thru-Hull connectors are designed for installation above the water line only. ● Inner diameter: 19 mm ● Maximum hull thickness: 3.6 cm ● Installation hole: ...
Attwood Mesh Strainer
● Durable strainers to prevent debris from clogging baitwell drains and aerator pumps. Formed stainless steel wire mesh molded into black PVC plastic base. ● Caution: Aerator pump must be secured with aerator attachment nut prior to installing strainer. ● The 19 mm thread fits with the: Attwood Thru-Hull with Strainer
Attwood Drain Strainer
● Durable strainers to prevent debris from clogging baitwell drains and aerator pumps. Formed on acetal plastic ● Caution: Aerator pump must be secured with aerator attachment nut prior to installing strainer. ● 19 mm thread fits with the: Attwood Thru-Hull with Strainer
Nuova Rade Plastic Thru Hull with Plastic Nut
● Made on PP Ref Ø A (Thread) Ø B (mm) C (mm) Ø D (mm) E (mm) 10250 1´´ 19 81 45 36 10251 1´´ 25 81 45 36 10252 1 1/2´´ 32 98 73 50 10253 1 1/2´´ 42 93 73 48 10256* 1 1/2´´ 32 93 73 50 10257* 1 1/2´´ 42 93 73 48 * The 10256 and 10257 models feature built-in non-return valves
Technical data
Colour: White
Material: Polypropylene (PP)
Nuova Rade Plastic Thru Hull Black
Plastic PP through-hull fittings with flush flange and hose barb, used to drain water to the outside of the hull and connect a hose with a 39 mm inner diameter.
● Made on PP Ref Ø A (mm)* Ø B (mm) C (mm) Ø D (mm) E (mm) 31351 38 42 94 73 50 * According to BSP thread dimensions
Technical data
Colour: Black
Material: Polypropylene (PP)
