Vetus

● Power consumption meter/battery monitor. ● The monitor shows you the exact state of charge of a battery or battery bank. ● The BATMONB has various functions such as voltage, charging or discharging current, nominal battery capacity scale range, and full discharge time with current charging rate.discharging rate. ● Suitable for 12 and 24 volt electrical systems ● Hole diameter Ø 85 mm, to... Read more »

• Switch Panel 12/24 Volt, For 8 Blade Fuses Or Automatic Fuses ( 16 Blade Fuses Supplied) • Switch panel P8F, 12/24V, for 8 automatic fuses (including 16 fuses) • It has 8 separate circuits, each provided with a switch, an LED indicator and a fuse holder. • Suitable for 12 and 24 volt DC circuits. • The following automotive fuses (ATO) are supplied as standard: 2x1A, 2x3A, ... Read more »

● Panel with switches type P 12 with 12 fuses ● 12V or 24V panel with 12 on/off switches ● 12 monitoring LEDs ● 12 10 A fuses. Supplied pre-wired. ● Manufactured with synthetic, non-corrosive materials. ● Includes 60 name plates. ● Mounting depth: 50mm ● Dimensions (length x width x height): 94 x 156 mm ● Mounting depth (inches): 1 31/32 Read more »

● Panel with 6 on/off switches ● 6 monitoring LEDs ● 6 auto-circuit breakers of 10 A. Supplied pre-wired. ● Made of synthetic, non-corrosive materials. ● Includes 60 name plates. ● Mounting depth: 50mm ● Dimensions (length x width x height): 94 x 156 mm ● Mounting depth (inches): 1 31/32 Read more »

● Panel with switches type P 12 with 12 fuses ● 12V or 24V panel with 12 on/off switches ● 12 monitoring LEDs ● 12 10 A fuses. Supplied pre-wired. ● Manufactured with synthetic, non-corrosive materials. ● Includes 60 name plates. ● Mounting depth: 50mm ● Dimensions (length x width x height): 94 x 156 mm ● Mounting depth (inches): 1 31/32 Read more »

● WS180 filters are suitable for both gasoline and diesel and comply with the fire resistance test according to ISO 1008. ● These filters/water separators should be installed as close as possible to the fuel tank and in a vertical position. ● Max. capacity in l/h: 180 litres/hour ● Recommended capacity in l/h: 110 litres/hour ● Connection thread: M14 x 1.5 ● Pillar hose connections: 8 mm ● Dime... Read more »

● WS720 filters are suitable for both gasoline and diesel and comply with the fire resistance test according to ISO 1008. ● These filters/water separators should be installed as close as possible to the fuel tank and in a vertical position. ● Max. capacity in l/h: 720 litres/hour ● Recommended capacity in l/h: 440 liters/hour ● Connection thread: M18 x 1.5 ● Pillar hose connections: 15 mm ... Read more »

● Type WS - Spare filter ●  WS180 and WS720 filters are suitable for both gasoline and diesel and comply with the fire resistance test according to ISO 1008. ●  These water separators/filters should be installed as close as possible to the fuel tank and in a vertical position. ●  WS 180 : Connections - Thread M 14x1.5 ● Hose column: 8 mm ● Height: 207mm,... Read more »

● Replacement filters for WS250 ● This filter should be changed annually.   Read more »

● The 320VTNEB Gasoline Fuel Filter/Water Separator is designed for outboard engines, but is also suitable as a pre-filter for inboard engines. ● Fits gasoline engines with a maximum of 500 hp. ● The maximum capacity is 120 liters per hour and can be installed on gasoline engines with a maximum power of 100 hp. ● The filter is supplied complete with all connection accessorie... Read more »

● Plugs in just below the deck filler cap to ensure that overflowing fuel or foam cannot flood the deck. The excess diesel* or gasoline is collected in a parallel hose that works as a tank and returns the fuel to the tank. ● The capacity of the tank is determined by the length and diameter of the hose. ● Housing and hose connection are made of anodized aluminum. ● Matching s... Read more »

●  The FS overflow is connected directly to the cover plug (1), with a diameter of 51mm. ●  This ensures that fuel or foam does not come out of the cover plug and dirty it, or contaminate the water; but it is collected inside the deposit. ●  The excess fuel will flow to the main tank through the connection (2), it also performs the necessary purge function for... Read more »

● Plugs in just below the deck filler cap to ensure that overflowing fuel or foam cannot flood the deck. The excess diesel* or gasoline is collected in a parallel hose that works as a tank and returns the fuel to the tank. ● The capacity of the tank is determined by the length and diameter of the hose. ● Housing and hose connection are made of anodized aluminum. ● Matching s... Read more »

●  The FS overflow is connected directly to the cover plug (1), with a diameter of 38 or 51mm. ●  This ensures that fuel or foam does not come out of the cover plug and dirty it, or contaminate the water; but it is collected inside the deposit. ●  The excess fuel will flow to the main tank through the connection (2), it also performs the necessary purge function fo... Read more »

● Rigid tank of 40, 60 or 80 litres. ● This reservoir incorporates a center point for mounting an SAE flanged float along with 5 bolt knockouts. (Does not include the float). ● Material: high quality polyethylene. 1. Fixed hose connector Ø38 mm for filling and 16 mm for ventilation line. 2. Ø8 mm swivel hose connection with collection tube for suction. 3. Ø8 mm swivel hose connector for fu... Read more »

● Rigid tank of 40, 60 or 80 litres. ● This reservoir incorporates a center point for mounting an SAE flanged float along with 5 bolt knockouts. (Does not include the float). ● Material: high quality polyethylene. 1. Fixed hose connector Ø38 mm for filling and 16 mm for ventilation line. 2. Ø10 mm swivel hose connection with collection tube for suction. 3. Ø10 mm swivel hose connector for ... Read more »

• Multipurpose tank, can be used with any liquid, fresh water, gray, black or diesel. • Material: high quality polyethylene. • Features a manhole cover and is ready for the appropriate ILT connection kit. • At the bottom is a 38mm connection that can be drilled for interconnect or drain purposes. • Due to the large inspection hole (140 mm), the tank complies with the fuel di... Read more »

● This connection kit has a saltwater resistant anodized aluminum cover with a counter flange and a rubber gasket that is easily tightened with just 3 screws, compressing the rubber gasket to ensure a perfect seal. ● The kit contains all the necessary connections, it is only necessary to cut 1 single hole with a diameter of 114 mm in the upper part of the fuel tank. ● This connection ... Read more »

● This connection kit has a saltwater resistant anodized aluminum cover with a counter flange and a rubber gasket that is easily tightened with just 3 screws, compressing the rubber gasket to ensure a perfect seal. ● The kit contains all the necessary connections, it is only necessary to cut 1 single hole with a diameter of 114 mm in the upper part of the fuel tank. ● This connection ... Read more »