The WTIKIT is the WTK02 complete with gasket, counterflange and fastenings. Overall diameter: 156mm Cut-out: 115mm. Not suitable for fuel tanks. Read more »

45,95€

Buy

Delivery in 7-10 daysTAX incl.

Superglue Ergo 5880

Special adhesive for hatch and porthole profiles, also used in speaker applications. • Black cyanoacrylate adhesive, developed for all applications in thermal and/or weather conditions. • The product exhibits excellent resistance to dynamic loads such as impacts or vibrations. Due to its resistance to short-term temperatures of up to +140°C, it is also suitable for SMD technology (surface mount... Read more »

54,95€

Buy

Delivery in 24 hoursTAX incl.

Vetus Hinge for Libero Hatches

Replacement hinge suitable for Vetus Libero series hatches. Read more »

18,95€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Hatch Handle

Vetus hatch handle Read more »

8,25€

Buy

Delivery in 24 hoursTAX incl.

Vetus Hatch Adjustment Kit for Altus Hatches

43,00€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Planus Complete Black Hinge

Complete replacement hinge for Vetus Planus series hatches. Complete with screws and anthracite black caps (post-2009). Read more »

29,95€

Buy

Delivery in 24 hoursTAX incl.

Vetus Right-Angle Racor for Flexible Tanks

Vetus synthetic fittings at an angle for flexible tanks. • Suitable for hoses with an internal diameter of: 13, 16, 19, 25, and 38mm Read more »

26,95€

Buy

Delivery in 24 hoursTAX incl.

Vetus Thermostatic Mixer for Heaters

Water heaters that use engine cooling water can supply freshwater contained inside at temperatures higher than 90ºC. There is always the risk that these high temperatures can cause burns when washing or showering. Using a mixer tap can take a long time to find a suitable temperature, with high water consumption as a result. Through a thermostatic mixer, the risk of burns is eliminated, and a sa... Read more »

143,90€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Purge Valve for Sanitary Tanks

Essential safety factor. To prevent the possibility of insufficient air entering through the ventilation line causing the tank to implode, VETUS has developed a valve according to the ISO8099 standard. In case of increased vacuum, the valve will automatically open, allowing air to enter the tank. Using this valve eliminates the need to adjust by enlarging the diameter of the ventilation line. &... Read more »

45,95€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Handle for Hatches PL, PM, PZ, PW, and PX.

Ergonomic knobs for Vetus PL, PM, PZ, PW, and PX hatches, ergonomically refined to allow your fingers to grip better: using them is extremely simple. The new knobs VP000044 are interchangeable with the original PPL knobs. Read more »

24,50€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Filter Mounting Bracket

This set contains mounting brackets for FTR330/FILTER150/NSF water filters. Read more »

38,95€

Buy

Delivery in 7-10 daysTAX incl.

Vetus ILT Cap Tool

Vetus has developed this tool to facilitate the opening and closing of ILT lids in confined spaces. • Made of glass-reinforced polyamide and stainless steel bolt and nut. • Practical: make opening and closing lids as easy and convenient as possible. • Uniform force distribution and precise grip for effortless turns • Durable and affordable • Compatible with ILT120B, I... Read more »

10,95€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Pipe Connection 38mm in 90º Elbow

Pipe connection 38mm, 90º angle for ILTCONF38 equipment. Read more »

19,00€

Buy

Delivery in 24 hoursTAX incl.

Vetus Freshwater Connection Kit

ILTCOND type freshwater connection kit. Maintaining fresh water and preventing marine growth can be tricky, but a large opening will help get the job done! Periodic cleaning of all connections and, of course, the tank itself will be a much easier job if it can be done in a fraction of the time! • For drinking water tanks of all varieties, all you need is the VETUS ILT fresh water disc! The conn... Read more »

77,50€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Inspection Cover for Waste Water Tanks

The ILT120PL is suitable for tanks with a wall thickness of 0.8 to 4 mm, such as the VETUS ATANK series. The ILT120PH is suitable for tanks with a wall thickness of 4 to 10 mm, such as the VETUS ATANK series. Made entirely of high quality plastic, the ILT120P is developed to be more resistant (better resistant to chlorine deposits) and functional (allowing easy opening, inspection and cl... Read more »

70,95€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Waste Water Tank with Connections

Basic tank including BTANKC connections. These tanks are made of an odour-impermeable synthetic material which allows the contents to be seen through, so that the level of the contents can be seen from the outside. The moulding incorporates the centre point for an SAE flanged float together with 5 blind bolt holes (except BTANK25C). This will save considerable installation time. installation t... Read more »

260,00€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Bulkhead Mounted Waste Water Tank

Bulkhead tank type WW (can be emptied without pump). Rigid, odour-tight waste water tank for grey and black water. Ideal for installation in confined spaces or where an underfloor situation is not practical. These tanks are made of translucent, odour-tight synthetic material, so the level of the contents can be seen from the outside. • Available in four sizes, both horizontal and vertica... Read more »

386,00€

Buy

Delivery in 7-10 daysTAX incl.

Vetus ILT Connection Kit for Sewage Tanks

Although not mandatory as with fuel tanks, a large inspection port in a wastewater tank will facilitate cleaning. Having all connections at a single point also simplifies inspection. The VETUS waste water disc is supplied with everything you need for your waste water tank, regardless of whether it is a custom-made tank made of steel, aluminium or a VETUS thick-walled rigid tank. The connection... Read more »

61,95€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Wastewater System Control Panel

This waste water control panel provides total management of the holding tank system. It indicates the contents level in the tank and controls the pump-out, either automatically or manually. The panel is connected to a VETUS level sensor in the tank, and a series of LEDs will specify when the tank is 25%, 50%, 75% or 100% full. When the tank is completely full, the LED will flash. The control p... Read more »

499,00€

Buy

Delivery in 7-10 daysTAX incl.

26%

Only 1 unit left

This sale ends in:

12 days 17h: 42m: 31s

Vetus Boatfix Adhesive

This glue is not only ideal for anti-slip gluing but is also suitable for gluing e.g. thin layers of PVC and polyester, leather and wood. • The bonding of laminates such as Formica, hard PVC and ABS is very good. • One 1 litre can is sufficient for bonding 2 to 3 m2. • Packaging: 1 litre Read more »

57,00€ ~~77,45€~~

Buy

Delivery in 24 hoursTAX incl.

Vetus Filter Mounting Bracket FTR140/WS180/WS720/NSFS

This kit contains the mounting brackets for the FTR140/WS180/WS720/NSFS waterstrainers. Read more »

36,90€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Heavy Duty Water Filter

• The filter is recognisable by its black housing and metal cover. • The newly designed metal cover on the top of the housing allows easy inspection without disassembly. • The filter housing is made of NAVIDURIN®. • The filter is tested to a maximum of 8 bar, which means that the filter can be safely placed below the waterline. The combination of the rugged body and metal ... Read more »

195,00€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Porthole Zone AIII PA

Shallow aluminum frame. “Smoke” coloured opening pane. VETUS expands the selection of portholes with the low profile PA series. Originated as special request item in APAC and USA, we have updated these portholes and included them in our regular stock. The ergonomic handels are easy to open and close and with the additional interior trim you can have the same level of finish as our other produc... Read more »

241,00€

Buy

Delivery in 7-10 daysTAX incl.

Vetus Windscreen Wiper Motor Robust Long Shaft

Robust wiper motor with long shaft and adjustable wiping angle. This quiet windscreen wiper is interchangeable with previous models HDM (A, B and C). It has a thermal cut-out which will protect the electric motor in case of excessive operating temperature. Type HDM is self-parking on either side, has 2 speeds and is available with 2 different shaft lengths. The wiping angle is fully adjustable... Read more »

569,30€

Buy

Delivery in 7-10 daysTAX incl.