Skip to content
I have bought other times here
I'm already a customer
I want to register
New customer
By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.

Ahead! We were waiting for you.
Create an Account
Access the
Professionals Area

Register and take advantage of the discounts and advantages of being a Professional of Nautical

Join the more than 500 Nautical Professionals now

professional register
Black Friday · Easysea & Garmin
53%
Only 1 unit left
Until 26/11/2026
Gareclick Outboard Transom Platform Telescoping Ladder

Gareclick Outboard Transom Platform Telescoping Ladder

Ref.: GAR-19536
420,25€
199,00 €
VAT included
LAST UNITS
In Stock
Buy now and receive it between Thursday 19 of November and Friday 20 of November.

* Except the products on request that depend on the receipt of the same.(+ info.)

Product description

Telescopic ladder with an external stern platform formed by two stainless steel rails, one on the lower bracket and one on the upper, both reversible and 1" (3 cm) in diameter. The durable HDPE platform is pre-drilled for easy assembly. It has two steps with flat polyethylene treads for greater comfort.

The steps deploy easily and the ladder slides up and under the platform for stowing. Assembly is carried out at an angle of 10º on the transom.

Measurements

Each step

  • Width: 18" (46 cm)
  • Depth: 19" (48 cm)
  • Height: 0.75" (2 cm)

Ladder

  • Deployed length: 23.5" (65 cm)
  • Folded length: 13.5" (34 cm)
  • Width: 11.25" (29 cm)

Platform

  • Width: 18" (46 cm)
  • Depth: 15" (38 cm)
  • Height: 0.75" (2 cm)

How to assemble the Garelick platform with the telescopic ladder

  1. After determining which side of the platform is most suitable for the handrail, install the platform with two bolts through the holes. Secure it with 2 lock nuts.
  2. Mount the SS 22 tip by inserting a bolt through the hole and secure it with a lock nut.
  3. Mount the SS 11 tip by inserting two bolts through the holes and secure it with a lock nut.
  4. Choose the most suitable side of the transom for the mounting platform. Turn the engine unit as far as possible towards that side. Make a line on the transom indicating the full extension of the engine unit towards that side.
  5. Place the platform away from the line traced at the desired mounting location, parallel to the waterline, and mark 4 mounting holes through the flattened ends of the rails and/or struts on the transom.
  6. Drill four marked holes with the selected fasteners (not included). Hold the drill perpendicular to the transom when drilling.
  7. If the transom is less than 2" thick, mounting a backing plate on the inside of the transom is recommended.

    NOTE: The backing plate must be made of aluminium, marine plywood or some other suitable non-compressible material.

  8. Coat the mounting surfaces of the rails and/or struts with a marine-grade caulking adhesive/compound; squeeze a small amount into the transom mounting holes. Insert the selected bolts through the holes and secure them in position with the appropriate fasteners.

Maintenance

  • Check the mounting fittings periodically and re-tighten them.
  • Regular rinsing with fresh water and periodic cleaning with a mild abrasive cleaner will help to retain the shine and prevent corrosion.
Be the first to leave your opinion
0/5
5 stars
0%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%
Write your opinion about this product
 
Select your language: