Kong

Mini nut keyholder.Technical dataCodeMaterial835KEY400KKAlu alloy read+

Anchoring device made of AISI 316 stainless steel. It is composed of an expansion plug and a plate. Suitable to be used in indoor and outdoor environments that are not aggressive enough to cause stress corrosion cracking (SCC).Versions with expansion plugs M10x70mm and M12x90mm.Tested EN 959:2018 Class 2 and UIAA.New sandblasted finish.Technical dataCodeVariantStandardMaterialWeight (g)Length (... read+

Alby is a single sheave pulley with aluminum swinging side plates and aliminum wheel. Taper bush lock pulley, high efficiency (93%). It works with ropes up to 26mm.High load, up to 50 kNConceived for arboriculture, treeclimbing.High quality product, made in Italy!Technical dataCodeLoad (kN)Weight (g)83900ON00KK501150 read+

Rollers for ropes, for use in work and rescue situations.The Rollers module is a compact and light weight rope protection system made of aluminium alloy.The 3 articulated pieces allow to cover perfectly any kind of edges and the nylon double rolls make 2 ropes action more quick and safe.Technical dataCodeMaterialWeight (g)840000000KKalu/nylon870 read+

Rollers for ropes, for use in work and rescue situations.Fitted with 6 double nylon rollers assembled in 5 segments.Double rollers allow the simultaneous sliding of two ropes in opposite directions. The four blocking bolts allow the correct positioning over edges, for the best slide of the ropes.Technical dataCodeMaterialWeight (g)840100000KKalu/nylon1650 read+

Telescopic pole with an ingenious hooking system that keeps the connector open.Once you reach the anchor point, just pull the pole and the connector will release automatically and close again.At this point a "safety line" was obtained to ascend safely, a ladder, a scaffolding, etc ...It can also be used for rescue situations (eg: recovering a wounded person in a crevasse).Equipped wit... read+

This tripod stand (which requires the use of textile ropes, both static and dynamic) has been designed for industrial operations (sewers, confined spaces, buildings, etc...)As for safety, it makes the operation easier and much more flexible than any other technology employing steel cables.Tripode Mono is made with tubes of aluminium alloy, assembled with stainless steel screws. The winches are ... read+

Tripode Base is an anchor point certified CE EN 795/B which allows to descend safely in manholes and other confined spaces where there is no other possibilities of anchoring.Tripode Base is made with tubes of aluminium alloy, assembled with stainless steel screws.Light and compact, it can be carried on one's backs.Together with its fittings it weighs about 14 kg; during transportation, clo... read+

Very light tube made of strong Cordura® used as a protection of ropes against sharp edges.Compared to the classic PVC protection, it has a significantly higher resistance and a lower weight.The Velcro® closure allows the positioning around the rope in any point.Fitted with a plastic ring to fix it avoiding slippage.Available in two colors for immediate identification in case of simultaneous use... read+

Thanks to the same principle of knots, SLYDE is an ingenious adjuster for ropes that reduces impact forces. It can be used with ropes with a diameter between 9mm and 10mm.The user can self-make its own system that can be created choosing the most appropriate way for the situation on-point, by taking into account types of rope and connections, number of forces involved, weights, environmental co... read+

A real workhorse for Kong!Multipurpose hot-forged aluminum plate for use with single, double and twin ropes.Its main applications are self-locking belaying for one or two seconds and abseiling.The central rib acts as a fulcrum on the connector and allows the recovery of two people, even secured to ropes of different diameter, either simultaneously or separately.In the case of a fall, only the r... read+

 A belay plate that can be used in many different conditions. It is a very useful device for rescue operations, the natural choice for mountain experts.It allows a cleaner belay point, avoiding tricky and cumbersome chains of carabiners and plates.The wide upper hole is able to accommodate two connectors for higher safety.When used as a descending device, it works with ropes from 8 to 12mm.Test... read+

New high strength 10 hole plate.10 mm thickness with beveled holes that allow textile items (rope, lanyards, straps) to be directly inserted without the need for connectors.Compatible with all rigging products.Allows the creation of complex anchors; floating, braced, in series and in parallel.Suitable for simultaneous use by 5 users.Complies with the relevant parts of EN 354, EN 795 and CEN TS ... read+

New high strength 10 hole plate.10 mm thickness with beveled holes that allow textile items (rope, lanyards, straps) to be directly inserted without the need for connectors.Compatible with all rigging products.Allows the creation of complex anchors; floating, braced, in series and in parallel.Suitable for simultaneous use by 5 users.Complies with the relevant parts of EN 354, EN 795 and CEN TS ... read+

Rigging plater with 3 holes, 20mm diameter, designed to organize a tidy workplace and to create an easy system of multiple anchor points.The upper hole allows to fit two carabiners at the same time.Made of light aluminum alloy, very light, compact and durable.New 10 mm thick version with beveled holes that allow textile items (rope, lanyards, straps) to be directly inserted without the need for... read+

Rigging plater with 4 holes, 20mm diameter, designed to organize a tidy workplace and to create an easy system of multiple anchor points.The upper hole allows to fit two carabiners at the same time.Made of light aluminum alloy, very light, compact and durable.New 10 mm thick version with beveled holes that allow textile items (rope, lanyards, straps) to be directly inserted without the need for... read+

Plate for multiple connections, allows the simultaneous connection of up to 6 users, compliant with the UIAA 130:2021 V1 standard and the relevant points of the EN 354:2010, EN 365:2004, EN 795:2012 standards.It is also a type A anchoring device, with multiple attachment points that can be connected to structures via the central hole (diameter from 36 to 38 mm), compliant with the EN 795:2012 s... read+

A revolutionary rope clamp for its extremely tiny dimensions (only 125g) and ergonomic shape. Its small size allows the users hand to sit comfortably inside the device, close to the rope in the same way as you would grabbing the actual rope. Available in right and left versions. The best support  to ascend a rope with the "ROPE WALKING SYSTEM" (as if climbing a ladder). After testing ... read+

A revolutionary rope clamp for its extremely tiny dimensions (only 125g) and ergonomic shape. Its small size allows the users hand to sit comfortably inside the device, close to the rope in the same way as you would grabbing the actual rope. Available in right and left versions. The best support  to ascend a rope with the "ROPE WALKING SYSTEM" (as if climbing a ladder). After testing ... read+

A revolutionary rope clamp for its extremely tiny dimensions (only 125g) and ergonomic shape. Its small size allows the users hand to sit comfortably inside the device, close to the rope in the same way as you would grabbing the actual rope. Available in right and left versions. The best support  to ascend a rope with the "ROPE WALKING SYSTEM" (as if climbing a ladder). After testing ... read+

A revolutionary rope clamp for its extremely tiny dimensions (only 125g) and ergonomic shape. Its small size allows the users hand to sit comfortably inside the device, close to the rope in the same way as you would grabbing the actual rope. Available in right and left versions. The best support  to ascend a rope with the "ROPE WALKING SYSTEM" (as if climbing a ladder). After testing ... read+

Foot ascender that improves and completes the performance of the Futura Hand ascender and the Futura Body chest rope clamp.Available in right and left versions, equipped with an anti-torsion stirrup.Fitted with a hole for inserting a carabiner that locks the cam, preventing accidental release of the rope.Futura System: it's the natural marriage between three devices, the best support  to a... read+

Foot ascender that improves and completes the performance of the Futura Hand ascender and Futura Body chest ascender.New version with lever that prevents accidental release of the rope.Available in right and left versions, equipped with anti-torsion stirrup.Perfect for rope access and arboriculture. Futura System: it's the natural marriage between three devices, the best support  to ascend... read+

Foot ascender that improves and completes the performance of the Futura Hand ascender and the Futura Body chest rope clamp.Available in right and left versions, equipped with an anti-torsion stirrup.Fitted with a hole for inserting a carabiner that locks the cam, preventing accidental release of the rope.Futura System: it's the natural marriage between three devices, the best support  to a... read+