Spend less effort at the helm
- Heading, course and route steering: follow navigation commands and use automatic turn patterns through a compatible chartplotter, subject to the connected equipment's capabilities.
- Direct pilot control: the dash-mounted AUTO/STBY button provides a convenient way to engage or disengage automatic steering.
- 10 Hz position and heading: Point-1AP combines GPS/GLONASS positioning and an electronic compass for responsive navigation and heading data, including at low speed.
- Continuum steering and virtual rudder feedback: NAC-1 simplifies installation in compatible configurations. Correct sizing and commissioning remain essential.
- NMEA 2000 integration: the supplied Micro-C accessories connect the pilot, sensor and compatible chartplotter.
What's included
Manufacturer-listed contents for 000-15952-001; one of each item:
| Component |
Part number |
Quantity |
| NAC-1 autopilot computer |
000-11769-001 |
1 |
| Point-1AP position and heading sensor |
000-12930-002 |
1 |
| PUMP-1 MKII 12 V, 0.8 L reversible hydraulic pump |
000-11770-002 |
1 |
| Hydraulic fitting kit for ORB systems |
000-15942-001 |
1 |
| Metal AUTO/STBY button |
000-13703-001 |
1 |
| 0.6 m Micro-C cable |
000-0119-88 |
1 |
| 1.8 m Micro-C cable |
000-0127-53 |
1 |
| 4.5 m Micro-C cable |
000-0119-86 |
1 |
| TR-120 terminator kit |
000-0127-52 |
1 |
| Micro-C power cable, without T connector |
000-12202-001 |
1 |
| Four-way Micro-C block |
000-12612-001 |
1 |
ORB hydraulic fitting kit
Kit 000-15942-001 contains two T connectors, one right-angle connector, three 750 mm black hoses, one bottle of hydraulic fluid and one filter funnel. The 5/16″ hoses are rated to 1,500 PSI, with 9/16 UNF to 9/16-24 UNF connections; the steering fittings use ORB-05M. Check connection compatibility and required hose lengths for your installation.
NAC-1 specifications
| Supply |
9–16 V DC |
| Consumption |
140 mA plus drive load |
| Drive output |
12 V reversible motor; 8 A continuous / 16 A peak for 1 second |
| Specified fuse |
20 A |
| Operating / storage temperature |
−25 to +55 °C / −30 to +70 °C |
| Waterproof rating |
IPX5 |
| Network |
NMEA 2000, one CAN Micro-C port, 3 LEN |
| Computer dimensions |
204 × 190 × 57 mm |
| Computer weight |
0.6 kg |
| Compass-safe distance |
0.5 m |
Included pump and sensor
PUMP-1 MKII: 12 V reversible hydraulic pump, 0.8 L model. Navico specifies compatibility with SeaStar manual steering up to 14 cubic inches. The pump includes three ORB-5 to 9/16 UNF fittings. The 0.8 L designation is not a reservoir volume or a steering-cylinder capacity.
Point-1AP: NMEA 2000 position and heading sensor with 10 Hz updates, GPS/GLONASS reception and SBAS corrections (WAAS, EGNOS and MSAS). The electronic compass provides heading for chart stabilisation and radar overlay where supported by connected equipment.
Check before ordering
Chartplotter, helm and steering cylinder are not included. Confirm the Lowrance chartplotter model and software, 12 V supply, hydraulic system, cylinder capacity and ORB connections. Boat length alone does not establish compatibility. Other steering systems or installation layouts may require additional adapters, hoses or materials. Installation, bleeding and calibration must follow the manufacturer's instructions.