Vetus

● An obstruction in the water intake of the engine or a damaged pump impeller results in a complete loss or severe reduction in the volume of cooling water of the exhaust system. In this case, the exhaust temperature will increase much faster than the engine temperature. Vetus always recommends placing an exhaust temperature alarm that provides visual and audible warning when the temperatu... Read more »

● Recommended for VETUS collectors with pre-installed connection ● To Fix to: MF / MV / LSG / LSS / MGS / MGL / MGP Read more »

The exhaust hull outlet made of flexible EPDM rubber is fixed on the outside of the helmet by means of a 2 mm thick AISI 316 stainless steel ring. The mufflers and VETUS gooseneck with the corresponding diameters fit directly into the rubber handle. A SLVBR or SLVBG type plastic splice is required to connect the exhaust pipe.   Ref For exhaust pipe (int Ø) (mm) A = measure hole Ø (mm) ØB (mm... Read more »

● Manufactured in stainless steel AISI 316 ● Integrated retention cover   Ref For exhaust pipe (int Ø) (mm) A = measure hole Ø (mm) ØB (mm) C (mm) TRC40SV 40 41 74 75 TRC45SV 45 46 79 75 TRC50SV 50 51 84 75 TRC60SV 60 61 94 75 TRC75SV 75 77 110 90 TRC90PV 90 91 123 110 TRC100SV 102 103 140 115 TRC125SV 127 128 169 140 TRC150SV 152 153 194 150 Read more »

● Made of black synthetic material reinforced with fiberglass and decorative band in stainless steel AISI 316 ● The exhaust pipe can be connected directly to this exhaust hull outlet   Ref For exhaust pipe (int Ø) (mm) A = measure hole Ø (mm) ØB (mm) C (mm)  TC090  90 93 141 110 TC100 102 103 155 115 TC125 127 128 178 140 TC150 152 153 203 150 Read more »

● Curve and suitable model for pipes with an internal diameter of Ø40 mm to 150 mm ● PVC material ● 60º curve   Ref Type ØD mm SLVBG40K curve 40 SLVBG45K curve 45 SLVBG50K curve 50 SLVBG60K curve 60 SLVBG65K curve 65 SLVBG75K curve 75 SLVBG90K curve 90 SLVBG100K curve 100 SLVBG110K curve 110 SLVBG125K curve 125 SLVBG150K curve 150 Read more »

● Allows the desired routing of the exhaust line ● Siynthetic material ● 90º curve   Ref Type ØD mm ELB90127 curve 127 ELB90152 curve 152 ELB90203 curve 203 ELB90254 curve 254 Read more »

Minimize noise caused by vibrations generated in the collector   Referencia Description MGVIB45 Anti vibratory support for MGP collection up to 35 kg MGVIB55 Anti-vibration support for MGS and MGL collectors up to 65 kg Read more »

In some vessels, the exhaust manifold must be placed so close to the water injection point of the engine's exhaust elbow (this is especially true in the case of horizontal exhaust systems), that this water can not always be mixed properly with the exhaust gases. very hot, often causing the tube and / or silencer to overheat. The installation of a water mixer directly behind the exhaust elbow is... Read more »

The ultrasonic level sensor measures the fluid level of the tanks without touching it. The sensor is suitable for drinking water, fuel (both diesel and gasoline) and dirty water (both sewage and gray water) and can be used together with all Vetus level meters and with the control panel for dirty water (WWCP ). When the power is on, the LED above the sensor is always flashing green!   Delivery c... Read more »

Ultrasonic level sensor 12 / 24V, bus technology, to indicate water level, fuel and wastewater.   ● Voltage: 12 and 24 V DC ● Interface: Bus (RS485 bus) ● Current consumption: 35 mA ● Max tank bottom: 120 cm ● Presicion: +/- 5% ● Temperature range: -20 to + 70ºC ● Casing: SAE, 5 holes ● Dimensions: Ø 77 x 23 mm Read more »

● The VETUS ultrasonic fluid level sensor, type SENSORB, measures the fluid level in any tank shape of your boat, regardless of its dimensions, but with a maximum depth of 120 cm, without any contact (not recommended in tanks of metal). This device is suitable for the following liquids: gasoline, diesel, drinking water, gray and black sanitary water. The sensor can be calibrated using the level... Read more »

● The Vetus GD1000 gas detector offers a gas detection system for a range of combustible gases, including propane, butane, methane and hydrogen. In addition it will also detect poisonous carbon monoxide. ● A single sensor is supplied as standard, which can detect both flammable gases (such as bottled gas) and carbon monoxide. A second sensor can be fitted (as an extra) for gas detecti... Read more »

● Additional sensor for gas detection ● Gasoline vapors, Carbon monoxide Read more »

● Front panel Ø 63 mm ● Bottom 90 mm ● Installation hole Ø 52 mm ● Compatible with other VETUS bow propeller panels and the round ring corresponds to other instruments for VETUS vessels ● Available in complete or compact version ● They are watertight and equipped with a switched socket to connect extra equipment (max 3 A) ● It incorporates operation in the cas... Read more »

● Front panel Ø 63 mm ● Bottom 90 mm ● Installation hole Ø 52 mm ● Compatible with other VETUS bow propeller panels and the round ring corresponds to other instruments for VETUS vessels ● Available in complete or compact version ● They are watertight and equipped with a switched socket to connect extra equipment (max 3 A) ● It incorporates operation in the cas... Read more »